On Mon, Mar 19, 2018 at 11:49:35AM +0800, ShuFan Lee wrote:
> From: ShuFan Lee <shufan_...@richtek.com>
>
> Add device tree binding document for Richtek RT1711H Type-C chip driver
Cc: Rob Herring <robh...@kernel.org>, devicet...@vger.kernel.org
is missing. Added here but it might make sense to resend.
>
> Signed-off-by: ShuFan Lee <shufan_...@richtek.com>
> ---
> .../devicetree/bindings/usb/richtek,rt1711h.txt | 30
> ++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
>
> changelogs between v2 & v3
> - add dt-bindings document for rt1711h typec chip driver
>
> diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
> b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
> new file mode 100644
> index 000000000000..7da4dac78ea7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt
> @@ -0,0 +1,30 @@
> +Richtek RT1711H TypeC PD Controller.
> +
> +Required properties:
> + - compatible : Must be "richtek,rt1711h".
> + - reg : Must be 0x4e, it's slave address of RT1711H.
> +
> +Recommended properties :
> + - interrupt-parent : the phandle for the interrupt controller that
> + provides interrupts for this device.
> + - interrupts : <a b> where a is the interrupt number and b represents an
> + encoding of the sense and level information for the interrupt.
> +
> +Optional properties :
> + - rt,intr-gpios : IRQ GPIO pin that's connected to RT1711H interrupt.
> + if interrupt-parent & interrupts are not defined, use this property
> instead.
> +
> +Example :
> +rt1711h@4e {
> + compatible = "richtek,rt1711h";
> + reg = <0x4e>;
> + interrupt-parent = <&gpio26>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +};
> +
> +Example using rt,intr-gpios :
> +rt1711h@4e {
> + compatible = "richtek,rt1711h";
> + reg = <0x4e>;
> + rt,intr-gpios = <&gpio26 0 0x0>;
> +};
> --
> 1.9.1
>
