On Wed, Mar 14, 2018 at 02:46:55PM -0500, Eddie James wrote:
>
>
> On 03/14/2018 02:19 PM, Guenter Roeck wrote:
> >On Tue, Mar 13, 2018 at 03:59:09PM -0500, Eddie James wrote:
> >>From: Christopher Bostic <cbos...@linux.vnet.ibm.com>
> >>
> >>Expose the gpiN_fault fields of mfr_status as individual debugfs
> >>attributes. This provides a way for users to be easily notified of gpi
> >>faults. Also provide the whole mfr_status register in debugfs.
> >>
> >>Signed-off-by: Christopher Bostic <cbos...@linux.vnet.ibm.com>
> >>Signed-off-by: Andrew Jeffery <and...@aj.id.au>
> >>Signed-off-by: Eddie James <eaja...@linux.vnet.ibm.com>
> >>---
> >> drivers/hwmon/pmbus/ucd9000.c | 140
> >> +++++++++++++++++++++++++++++++++++++++++-
> >> 1 file changed, 139 insertions(+), 1 deletion(-)
> >>
> >>diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
> >>index 023fb9e..b073d8e 100644
> >>--- a/drivers/hwmon/pmbus/ucd9000.c
> >>+++ b/drivers/hwmon/pmbus/ucd9000.c
> >>@@ -19,6 +19,7 @@
> >> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> >> */
> >>+#include <linux/debugfs.h>
> >> #include <linux/kernel.h>
> >> #include <linux/module.h>
> >> #include <linux/of_device.h>
> >>@@ -36,6 +37,7 @@
> >> #define UCD9000_NUM_PAGES 0xd6
> >> #define UCD9000_FAN_CONFIG_INDEX 0xe7
> >> #define UCD9000_FAN_CONFIG 0xe8
> >>+#define UCD9000_MFR_STATUS 0xf3
> >> #define UCD9000_GPIO_SELECT 0xfa
> >> #define UCD9000_GPIO_CONFIG 0xfb
> >> #define UCD9000_DEVICE_ID 0xfd
> >>@@ -63,13 +65,22 @@
> >> #define UCD901XX_NUM_GPIOS 26
> >> #define UCD90910_NUM_GPIOS 26
> >>+#define UCD9000_DEBUGFS_NAME_LEN 24
> >>+#define UCD9000_GPI_COUNT 8
> >>+
> >> struct ucd9000_data {
> >> u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
> >> struct pmbus_driver_info info;
> >> struct gpio_chip gpio;
> >>+ struct dentry *debugfs;
> >> };
> >> #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data,
> >> info)
> >>+struct ucd9000_debugfs_entry {
> >>+ struct i2c_client *client;
> >>+ u8 index;
> >>+};
> >>+
> >> static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
> >> {
> >> int fan_config = 0;
> >>@@ -306,6 +317,124 @@ static int ucd9000_gpio_direction_output(struct
> >>gpio_chip *gc,
> >> val);
> >> }
> >>+#if IS_ENABLED(CONFIG_DEBUG_FS)
> >DEBUG_FS is bool, so #ifdef CONFIG_DEBUG_FS is fine here.
>
> Ok.
>
> >
> >>+static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer)
> >>+{
> >>+ int ret = pmbus_set_page(client, 0);
> >>+
> >>+ if (ret < 0)
> >>+ return ret;
> >>+
> >>+ /*
> >>+ * With the ucd90120 and ucd90124 devices, this command [MFR_STATUS]
> >>+ * is 2 bytes long (bits 0-15). With the ucd90240 this command is 5
> >>+ * bytes long. With all other devices, it is 4 bytes long.
> >>+ */
> >>+ return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer);
> >>+}
> >>+
> >>+static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val)
> >>+{
> >>+ struct ucd9000_debugfs_entry *entry = data;
> >>+ struct i2c_client *client = entry->client;
> >>+ u8 buffer[4];
> >>+ int ret;
> >>+
> >>+ /*
> >>+ * This attribute is only created for devices that return 4 bytes for
> >>+ * status_mfr, so it's safe to call with 4-byte buffer.
> >>+ */
> >>+ ret = ucd9000_get_mfr_status(client, buffer);
> >>+ if (ret < 0)
> >>+ return ret;
> >>+
> >>+ /*
> >>+ * Attribute only created for devices with gpi fault bits at bits
> >>+ * 16-23, which is the second byte of the response.
> >>+ */
> >>+ *val = !!(buffer[1] & BIT(entry->index));
> >>+
> >>+ return 0;
> >>+}
> >>+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit,
> >>+ ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n");
> >>+
> >>+static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file,
> >>+ char __user *buf, size_t count,
> >>+ loff_t *ppos)
> >>+{
> >>+ struct i2c_client *client = file->private_data;
> >>+ u8 buffer[5] = { 0 }; /* Need max 5 bytes for any ucd9000 chip. */
> >>+ int ret;
> >>+
> >>+ ret = ucd9000_get_mfr_status(client, buffer);
> >>+ if (ret < 0)
> >>+ return ret;
> >>+
> >>+ return simple_read_from_buffer(buf, count, ppos, buffer, ret);
> >Doesn't this report the raw binary data to userspace ? The output
> >should be human-readable.
>
> Yes, sorry I thought that was your suggestion when you mentioned hexdump
> earlier... Will fix.
>
Sorry for the confusion. I meant a user-readable hexdump.
Guenter
> Thanks,
> Eddie
>
> >
> >>+}
> >>+
> >>+static const struct file_operations ucd9000_debugfs_show_mfr_status_fops =
> >>{
> >>+ .llseek = noop_llseek,
> >>+ .read = ucd9000_debugfs_read_mfr_status,
> >>+ .open = simple_open,
> >>+};
> >>+
> >>+static int ucd9000_init_debugfs(struct i2c_client *client,
> >>+ const struct i2c_device_id *mid,
> >>+ struct ucd9000_data *data)
> >>+{
> >>+ struct dentry *debugfs;
> >>+ struct ucd9000_debugfs_entry *entries;
> >>+ int i;
> >>+ char name[UCD9000_DEBUGFS_NAME_LEN];
> >>+
> >>+ debugfs = pmbus_get_debugfs_dir(client);
> >>+ if (!debugfs)
> >>+ return -ENOENT;
> >>+
> >>+ data->debugfs = debugfs_create_dir(client->name, debugfs);
> >>+ if (!data->debugfs)
> >>+ return -ENOENT;
> >>+
> >>+ /*
> >>+ * Of the chips this driver supports, only the UCD9090, UCD90160,
> >>+ * and UCD90910 report GPI faults in their MFR_STATUS register, so only
> >>+ * create the GPI fault debugfs attributes for those chips.
> >>+ */
> >>+ if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 ||
> >>+ mid->driver_data == ucd90910) {
> >>+ entries = devm_kzalloc(&client->dev,
> >>+ sizeof(*entries) * UCD9000_GPI_COUNT,
> >>+ GFP_KERNEL);
> >>+ if (!entries)
> >>+ return -ENOMEM;
> >>+
> >>+ for (i = 0; i < UCD9000_GPI_COUNT; i++) {
> >>+ entries[i].client = client;
> >>+ entries[i].index = i;
> >>+ scnprintf(name, UCD9000_DEBUGFS_NAME_LEN,
> >>+ "gpi%d_alarm", i + 1);
> >>+ debugfs_create_file(name, 0444, data->debugfs,
> >>+ &entries[i],
> >>+ &ucd9000_debugfs_mfr_status_bit);
> >>+ }
> >>+ }
> >>+
> >>+ scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status");
> >>+ debugfs_create_file(name, 0444, data->debugfs, client,
> >>+ &ucd9000_debugfs_show_mfr_status_fops);
> >>+
> >>+ return 0;
> >>+}
> >>+#else
> >>+static int ucd9000_init_debugfs(struct i2c_client *client,
> >>+ struct ucd9000_data *data)
> >>+{
> >>+ return 0;
> >>+}
> >>+#endif /* IS_ENABLED(CONFIG_DEBUG_FS) */
> >>+
> >> static int ucd9000_probe(struct i2c_client *client,
> >> const struct i2c_device_id *id)
> >> {
> >>@@ -464,7 +593,16 @@ static int ucd9000_probe(struct i2c_client *client,
> >> ret);
> >> }
> >>- return pmbus_do_probe(client, mid, info);
> >>+ ret = pmbus_do_probe(client, mid, info);
> >>+ if (ret)
> >>+ return ret;
> >>+
> >>+ ret = ucd9000_init_debugfs(client, mid, data);
> >>+ if (ret)
> >>+ dev_warn(&client->dev, "Failed to register debugfs: %d\n",
> >>+ ret);
> >>+
> >>+ return 0;
> >> }
> >> /* This is the driver that will be inserted */
> >>--
> >>1.8.3.1
> >>
>
