This is the second iteration of the Theobroma Systems CAN/USB adapter driver.
Thanks to feedback from the list and additonal internal stress-testing, the driver, the wire protocol and the device firmware have been improved. Among other changes, error states are now handled, and an explicit tx completion message has been added. A few questions and review comments are still open. I will post an email gathering all answers in a reply to this cover letter. Jakob Unterwurzacher (1): can: ucan: add driver for Theobroma Systems UCAN devices Documentation/networking/can_ucan_protocol.rst | 315 +++++ Documentation/networking/index.rst | 1 + drivers/net/can/usb/Kconfig | 10 + drivers/net/can/usb/Makefile | 1 + drivers/net/can/usb/ucan.c | 1587 ++++++++++++++++++++++++ 5 files changed, 1914 insertions(+) create mode 100644 Documentation/networking/can_ucan_protocol.rst create mode 100644 drivers/net/can/usb/ucan.c -- 2.11.0 Cc: Martin Elshuber <martin.elshu...@theobroma-systems.com> Cc: Philipp Tomsich <philipp.toms...@theobroma-systems.com> Cc: Wolfgang Grandegger <w...@grandegger.com> Cc: Marc Kleine-Budde <m...@pengutronix.de> Cc: linux-...@vger.kernel.org Cc: linux-kernel@vger.kernel.org
