Enable an optional bus clock provided by DT. Signed-off-by: Phil Edworthy <[email protected]> --- v2: - Fix include order. - Use a clock name. - Check errors from clk_prepare_enable() - Add calls to enable/disable the clock in PM --- drivers/gpio/gpio-dwapb.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index b0704a8..226977f 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -8,8 +8,9 @@ * All enquiries to [email protected] */ #include <linux/acpi.h> -#include <linux/gpio/driver.h> +#include <linux/clk.h> #include <linux/err.h> +#include <linux/gpio/driver.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -98,6 +99,7 @@ struct dwapb_gpio { struct irq_domain *domain; unsigned int flags; struct reset_control *rst; + struct clk *clk; }; static inline u32 gpio_reg_v2_convert(unsigned int offset) @@ -670,6 +672,16 @@ static int dwapb_gpio_probe(struct platform_device *pdev) if (IS_ERR(gpio->regs)) return PTR_ERR(gpio->regs); + /* Optional bus clock */ + gpio->clk = devm_clk_get(&pdev->dev, "bus"); + if (!IS_ERR(gpio->clk)) { + err = clk_prepare_enable(gpio->clk); + if (err) { + dev_info(&pdev->dev, "Cannot enable clock\n"); + return err; + } + } + gpio->flags = 0; if (dev->of_node) { const struct of_device_id *of_devid; @@ -712,6 +724,7 @@ static int dwapb_gpio_remove(struct platform_device *pdev) dwapb_gpio_unregister(gpio); dwapb_irq_teardown(gpio); reset_control_assert(gpio->rst); + clk_disable_unprepare(gpio->clk); return 0; } @@ -757,6 +770,8 @@ static int dwapb_gpio_suspend(struct device *dev) } spin_unlock_irqrestore(&gc->bgpio_lock, flags); + clk_disable_unprepare(gpio->clk); + return 0; } @@ -768,6 +783,9 @@ static int dwapb_gpio_resume(struct device *dev) unsigned long flags; int i; + if (!IS_ERR(gpio->clk)) + clk_prepare_enable(gpio->clk); + spin_lock_irqsave(&gc->bgpio_lock, flags); for (i = 0; i < gpio->nr_ports; i++) { unsigned int offset; -- 2.7.4
