Hi Leo,
Some more review comments below:
On 08/03/18 07:38, Wen Nuan wrote:
> From: Leo Wen <leo....@rock-chips.com>
>
> Rk1608 is used as a PreISP to link on Soc, which mainly has two functions.
> One is to download the firmware of RK1608, and the other is to match the
> extra sensor such as camera and enable sensor by calling sensor's s_power.
>
> use below v4l2-ctl command to capture frames.
>
> v4l2-ctl --verbose -d /dev/video1 --stream-mmap=2
> --stream-to=/tmp/stream.out --stream-count=60 --stream-poll
>
> use below command to playback the video on your PC.
>
> mplayer ./stream.out -loop 0 -demuxer rawvideo -rawvideo
> w=640:h=480:size=$((640*480*3/2)):format=NV12
>
> Changes V4:
> - Request the GPIO as input with the flag GPIOD_IN.
> - Request the GPIO as output with the flag GPIOD_OUT_LOW.
> - Delete these redundant functions(gpiod_direction_input..etc.).
>
> Signed-off-by: Leo Wen <leo....@rock-chips.com>
> ---
> MAINTAINERS | 6 +
> drivers/media/spi/Makefile | 1 +
> drivers/media/spi/rk1608.c | 1374
> ++++++++++++++++++++++++++++++++++++++++++++
> drivers/media/spi/rk1608.h | 442 ++++++++++++++
> 4 files changed, 1823 insertions(+)
> create mode 100644 drivers/media/spi/rk1608.c
> create mode 100644 drivers/media/spi/rk1608.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 93a12af..b2a98e3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -136,6 +136,12 @@ Maintainers List (try to look for most precise areas
> first)
>
> -----------------------------------
>
> +ROCKCHIP RK1608 DRIVER
> +M: Leo Wen <leo....@rock-chips.com>
> +S: Maintained
> +F: drivers/media/spi/rk1608.c
> +F: drivers/media/spi/rk1608.h
> +
> 3C59X NETWORK DRIVER
> M: Steffen Klassert <klass...@mathematik.tu-chemnitz.de>
> L: net...@vger.kernel.org
> diff --git a/drivers/media/spi/Makefile b/drivers/media/spi/Makefile
> index ea64013..6d0e6ee 100644
> --- a/drivers/media/spi/Makefile
> +++ b/drivers/media/spi/Makefile
> @@ -1 +1,2 @@
> obj-$(CONFIG_VIDEO_GS1662) += gs1662.o
> +obj-$(CONFIG_VIDEO_RK1608) += rk1608.o
> diff --git a/drivers/media/spi/rk1608.c b/drivers/media/spi/rk1608.c
> new file mode 100644
> index 0000000..fedcd0b
> --- /dev/null
> +++ b/drivers/media/spi/rk1608.c
> @@ -0,0 +1,1374 @@
> +/**
> + * Rockchip rk1608 driver
> + *
> + * SPDX-License-Identifier: GPL-2.0
This doesn't follow the SPDX guidelines.
This should be a single line starting with '//' at the beginning of the source.
See e.g. drivers/media/cec/cec-pin.c
You probably also want to use GPL-2.0-only.
> + *
> + * Copyright (C) 2017 Rockchip Electronics Co., Ltd.
> + *
> + */
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/delay.h>
> +#include <linux/firmware.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-subdev.h>
> +#include "rk1608.h"
> +
> +/**
> + * Rk1608 is used as the Pre-ISP to link on Soc, which mainly has two
> + * functions. One is to download the firmware of RK1608, and the other
> + * is to match the extra sensor such as camera and enable sensor by
> + * calling sensor's s_power.
> + * |-----------------------|
> + * | Sensor Camera |
> + * |-----------------------|
> + * |-----------||----------|
> + * |-----------||----------|
> + * |-----------\/----------|
> + * | Pre-ISP RK1608 |
> + * |-----------------------|
> + * |-----------||----------|
> + * |-----------||----------|
> + * |-----------\/----------|
> + * | Rockchip Soc |
> + * |-----------------------|
> + * Data Transfer As shown above. In RK1608, the data received from the
> + * extra sensor,and it is passed to the Soc through ISP.
> + */
> +
> +static inline struct rk1608_state *to_state(struct v4l2_subdev *sd)
> +{
> + return container_of(sd, struct rk1608_state, sd);
> +}
> +
> +/**
> + * rk1608_operation_query - RK1608 last operation state query
> + *
> + * @spi: device from which data will be read
> + * @state: last operation state [out]
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_operation_query(struct spi_device *spi, s32 *state)
> +{
> + s32 query_cmd = RK1608_CMD_QUERY;
> + struct spi_transfer query_cmd_packet = {
> + .tx_buf = &query_cmd,
> + .len = sizeof(query_cmd),
> + };
> + struct spi_transfer state_packet = {
> + .rx_buf = state,
> + .len = sizeof(*state),
> + };
> + struct spi_message m;
> +
> + spi_message_init(&m);
> + spi_message_add_tail(&query_cmd_packet, &m);
> + spi_message_add_tail(&state_packet, &m);
> + spi_sync(spi, &m);
> +
> + return ((*state & RK1608_STATE_ID_MASK) == RK1608_STATE_ID) ? 0 : -1;
> +}
> +
> +static int rk1608_write(struct spi_device *spi,
> + s32 addr, const s32 *data, size_t data_len)
> +{
> + s32 write_cmd = RK1608_CMD_WRITE;
> + struct spi_transfer write_cmd_packet = {
> + .tx_buf = &write_cmd,
> + .len = sizeof(write_cmd),
> + };
> + struct spi_transfer addr_packet = {
> + .tx_buf = &addr,
> + .len = sizeof(addr),
> + };
> + struct spi_transfer data_packet = {
> + .tx_buf = data,
> + .len = data_len,
> + };
> + struct spi_message m;
> +
> + spi_message_init(&m);
> + spi_message_add_tail(&write_cmd_packet, &m);
> + spi_message_add_tail(&addr_packet, &m);
> + spi_message_add_tail(&data_packet, &m);
> + return spi_sync(spi, &m);
> +}
> +
> +/**
> + * rk1608_safe_write - RK1608 synchronous write with state check
> + *
> + * @spi: spi device
> + * @addr: resource address
> + * @data: data buffer
> + * @data_len: data buffer size, in bytes
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_safe_write(struct spi_device *spi,
> + s32 addr, const s32 *data, size_t data_len)
> +{
> + s32 state, retry = 0;
> +
> + while (data_len > 0) {
> + size_t slen = MIN(data_len, RK1608_MAX_OP_BYTES);
> +
> + do {
> + rk1608_write(spi, addr, data, data_len);
> + if (rk1608_operation_query(spi, &state) != 0)
> + return -EPERM;
> + if ((state & RK1608_STATE_MASK) == 0)
> + break;
> + udelay(RK1608_OP_TRY_DELAY);
> + } while (retry++ != RK1608_OP_TRY_MAX);
> +
> + data_len = data_len - slen;
> + data = (s32 *)((s8 *)data + slen);
> + addr += slen;
> + }
> + return 0;
> +}
> +
> +static void rk1608_hw_init(struct spi_device *spi)
> +{
> + s32 write_data = SPI0_PLL_SEL_APLL;
> +
> + /* modify rk1608 spi slave clk to 300M */
> + rk1608_safe_write(spi, CRUPMU_CLKSEL14_CON, &write_data, 4);
> +
> + /* modify rk1608 spi io driver strength to 8mA */
> + write_data = BIT7_6_SEL_8MA;
> + rk1608_safe_write(spi, PMUGRF_GPIO1A_E, &write_data, 4);
> + write_data = BIT1_0_SEL_8MA;
> + rk1608_safe_write(spi, PMUGRF_GPIO1B_E, &write_data, 4);
> +}
> +
> +/**
> + * rk1608_read - RK1608 synchronous read
> + *
> + * @spi: spi device
> + * @addr: resource address
> + * @data: data buffer [out]
> + * @data_len: data buffer size, in bytes
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_read(struct spi_device *spi,
> + s32 addr, s32 *data, size_t data_len)
> +{
> + s32 real_len = MIN(data_len, RK1608_MAX_OP_BYTES);
> + s32 read_cmd = RK1608_CMD_READ | (real_len << 14 &
> + RK1608_STATE_ID_MASK);
> + s32 read_begin_cmd = RK1608_CMD_READ_BEGIN;
> + s32 dummy = 0;
> + struct spi_transfer read_cmd_packet = {
> + .tx_buf = &read_cmd,
> + .len = sizeof(read_cmd),
> + };
> + struct spi_transfer addr_packet = {
> + .tx_buf = &addr,
> + .len = sizeof(addr),
> + };
> + struct spi_transfer read_dummy_packet = {
> + .tx_buf = &dummy,
> + .len = sizeof(dummy),
> + };
> + struct spi_transfer read_begin_cmd_packet = {
> + .tx_buf = &read_begin_cmd,
> + .len = sizeof(read_begin_cmd),
> + };
> + struct spi_transfer data_packet = {
> + .rx_buf = data,
> + .len = data_len,
> + };
> + struct spi_message m;
> +
> + spi_message_init(&m);
> + spi_message_add_tail(&read_cmd_packet, &m);
> + spi_message_add_tail(&addr_packet, &m);
> + spi_message_add_tail(&read_dummy_packet, &m);
> + spi_message_add_tail(&read_begin_cmd_packet, &m);
> + spi_message_add_tail(&data_packet, &m);
> + return spi_sync(spi, &m);
> +}
> +
> +/**
> + * rk1608_safe_read - RK1608 synchronous read with state check
> + *
> + * @spi: spi device
> + * @addr: resource address
> + * @data: data buffer [out]
> + * @data_len: data buffer size, in bytes
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_safe_read(struct spi_device *spi,
> + s32 addr, s32 *data, size_t data_len)
> +{
> + s32 state = 0;
> + s32 retry = 0;
> +
> + do {
> + rk1608_read(spi, addr, data, data_len);
> + if (rk1608_operation_query(spi, &state) != 0)
> + return -EPERM;
> + if ((state & RK1608_STATE_MASK) == 0)
> + break;
> + udelay(RK1608_OP_TRY_DELAY);
> + } while (retry++ != RK1608_OP_TRY_MAX);
> +
> + return -(state & RK1608_STATE_MASK);
> +}
> +
> +static int rk1608_read_wait(struct spi_device *spi,
> + const struct rk1608_section *sec)
> +{
> + s32 value = 0;
> + int retry = 0;
> + int ret = 0;
> +
> + do {
> + ret = rk1608_safe_read(spi, sec->wait_addr, &value, 4);
> + if (!ret && value == sec->wait_value)
> + break;
> +
> + if (retry++ == sec->timeout) {
> + ret = -EPERM;
> + dev_err(&spi->dev, "Read 0x%x is %x != %x timeout\n",
> + sec->wait_addr, value, sec->wait_value);
> + break;
> + }
> + mdelay(sec->wait_time);
> + } while (1);
> +
> + return ret;
> +}
> +
> +static int rk1608_boot_request(struct spi_device *spi,
> + const struct rk1608_section *sec)
> +{
> + struct rk1608_boot_req boot_req;
> + int retry = 0;
> + int ret = 0;
> +
> + /*send boot request to rk1608 for ddr init*/
Space after /* and before */
Please grep for this pattern and fix it if it happens elsewhere as well.
> + boot_req.flag = sec->flag;
> + boot_req.load_addr = sec->load_addr;
> + boot_req.boot_len = sec->size;
> + boot_req.status = 1;
> + boot_req.cmd = 2;
> +
> + ret = rk1608_safe_write(spi, BOOT_REQUEST_ADDR,
> + (s32 *)&boot_req, sizeof(boot_req));
> + if (ret)
> + return ret;
> +
> + if (sec->flag & BOOT_FLAG_READ_WAIT) {
> + /*waitting for rk1608 init ddr done*/
Same issue. Also: waitting -> waiting
> + do {
> + ret = rk1608_safe_read(spi, BOOT_REQUEST_ADDR,
> + (s32 *)&boot_req,
> + sizeof(boot_req));
> +
> + if (!ret && boot_req.status == 0)
> + break;
> +
> + if (retry++ == sec->timeout) {
> + ret = -EPERM;
> + dev_err(&spi->dev, "Boot request timeout\n");
> + break;
> + }
> + mdelay(sec->wait_time);
> + } while (1);
> + }
> +
> + return ret;
> +}
> +
> +static int rk1608_download_section(struct spi_device *spi, const u8 *data,
> + const struct rk1608_section *sec)
> +{
> + int ret = 0;
> +
> + dev_info(&spi->dev, "offset:%x,size:%x,addr:%x,wait_time:%x",
> + sec->offset, sec->size, sec->load_addr, sec->wait_time);
> + dev_info(&spi->dev, "timeout:%x,crc:%x,flag:%x,type:%x",
> + sec->timeout, sec->crc_16, sec->flag, sec->type);
> +
> + if (sec->size > 0) {
> + ret = rk1608_safe_write(spi, sec->load_addr,
> + (s32 *)(data + sec->offset),
> + sec->size);
> + if (ret) {
> + dev_err(&spi->dev, "RK1608 safe write err =%d\n", ret);
> + return ret;
> + }
> + }
> +
> + if (sec->flag & BOOT_FLAG_BOOT_REQUEST)
> + ret = rk1608_boot_request(spi, sec);
> + else if (sec->flag & BOOT_FLAG_READ_WAIT)
> + ret = rk1608_read_wait(spi, sec);
> +
> + return ret;
> +}
> +
> +/**
> + * rk1608_download_fw: - rk1608 firmware download through spi
> + *
> + * @spi: spi device
> + * @fw_name: name of firmware file, NULL for default firmware name
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + **/
Just */, not **/
> +static int rk1608_download_fw(struct spi_device *spi, const char *fw_name)
> +{
> + const struct rk1608_header *head;
> + const struct firmware *fw;
> + int i = 0;
> + int ret = 0;
> +
> + if (!fw_name)
> + fw_name = RK1608_FW_NAME;
> +
> + dev_info(&spi->dev, "Before request firmware");
> + ret = request_firmware(&fw, fw_name, &spi->dev);
> + if (ret) {
> + dev_err(&spi->dev, "Request firmware %s failed!", fw_name);
> + return ret;
> + }
> +
> + head = (const struct rk1608_header *)fw->data;
> +
> + dev_info(&spi->dev, "Request firmware %s (version:%s) success!",
> + fw_name, head->version);
> +
> + for (i = 0; i < head->section_count; i++) {
> + ret = rk1608_download_section(spi, fw->data,
> + &head->sections[i]);
> + if (ret)
> + break;
> + }
> +
> + release_firmware(fw);
> + return ret;
> +}
> +
> +static int rk1608_lsb_w32(struct spi_device *spi, s32 addr, s32 data)
> +{
> + s32 write_cmd = RK1608_CMD_WRITE;
> + struct spi_transfer write_cmd_packet = {
> + .tx_buf = &write_cmd,
> + .len = sizeof(write_cmd),
> + };
> + struct spi_transfer addr_packet = {
> + .tx_buf = &addr,
> + .len = sizeof(addr),
> + };
> + struct spi_transfer data_packet = {
> + .tx_buf = &data,
> + .len = sizeof(data),
> + };
> + struct spi_message m;
> +
> + write_cmd = MSB2LSB32(write_cmd);
> + addr = MSB2LSB32(addr);
> + data = MSB2LSB32(data);
> + spi_message_init(&m);
> + spi_message_add_tail(&write_cmd_packet, &m);
> + spi_message_add_tail(&addr_packet, &m);
> + spi_message_add_tail(&data_packet, &m);
> + return spi_sync(spi, &m);
> +}
> +
> +static int rk1608_msg_init_sensor(struct rk1608_state *pdata,
> + struct msg_init *msg, int id)
> +{
> + msg->msg_head.size = sizeof(struct msg_init);
> + msg->msg_head.type = id_msg_init_sensor_t;
> + msg->msg_head.id.camera_id = pdata->cd[id]->ci.cam_id;
> + msg->msg_head.mux.sync = 1;
> + msg->in_mipi_phy = pdata->cd[id]->ci.in_mipi;
> + msg->out_mipi_phy = pdata->cd[id]->ci.out_mipi;
> + msg->mipi_lane = pdata->cd[id]->ci.mipi_lane;
> + msg->bayer = 0;
> + memcpy(msg->sensor_name, pdata->cd[id]->sd.name,
> + sizeof(msg->sensor_name));
> + msg->i2c_slave_addr = (pdata->cd[id]->client->addr) << 1;
> + msg->i2c_bus = pdata->cd[id]->ci.i2c_bus;
> +
> + return rk1608_send_msg_to_dsp(pdata, &msg->msg_head);
> +}
> +
> +static int rk1608_msg_set_input_size(struct rk1608_state *pdata,
> + struct msg_in_size *msg, int id)
> +{
> + msg->msg_head.size = sizeof(struct msg_in_size) / sizeof(int);
> + msg->msg_head.type = id_msg_set_input_size_t;
> + msg->msg_head.id.camera_id = pdata->cd[id]->ci.cam_id;
> + msg->msg_head.mux.sync = 1;
> + msg->data_type = pdata->cd[id]->ci.data_type;
> + msg->decode_format = pdata->cd[id]->ci.data_type;
> + msg->width = pdata->cd[id]->ci.width;
> + msg->height = pdata->cd[id]->ci.height;
> + msg->flag = 1;
> +
> + return rk1608_send_msg_to_dsp(pdata, &msg->msg_head);
> +}
> +
> +static int rk1608_msg_set_output_size(struct rk1608_state *pdata,
> + struct msg_out_size *msg, int id)
> +{
> + msg->msg_head.size = sizeof(struct msg_out_size);
> + msg->msg_head.type = id_msg_set_output_size_t;
> + msg->msg_head.id.camera_id = pdata->cd[id]->ci.cam_id;
> + msg->msg_head.mux.sync = 1;
> + msg->width = pdata->cd[id]->ci.width;
> + msg->height = pdata->cd[id]->ci.height;
> + msg->mipi_clk = pdata->cd[id]->ci.mipi_clock;
> + msg->line_length_pclk = pdata->cd[id]->ci.htotal;
> + msg->frame_length_lines = pdata->cd[id]->ci.vtotal;
> +
> + return rk1608_send_msg_to_dsp(pdata, &msg->msg_head);
> +}
> +
> +static int rk1608_msg_set_stream_in_on(struct rk1608_state *pdata,
> + struct msg *msg, int id)
> +{
> + msg->size = sizeof(struct msg);
> + msg->type = id_msg_set_stream_in_on_t;
> + msg->id.camera_id = pdata->cd[id]->ci.cam_id;
> + msg->mux.sync = 1;
> +
> + return rk1608_send_msg_to_dsp(pdata, msg);
> +}
> +
> +static int rk1608_msg_set_stream_in_off(struct rk1608_state *pdata,
> + struct msg *msg, int id)
> +{
> + msg->size = sizeof(struct msg);
> + msg->type = id_msg_set_stream_in_off_t;
> + msg->id.camera_id = pdata->cd[id]->ci.cam_id;
> + msg->mux.sync = 1;
> +
> + return rk1608_send_msg_to_dsp(pdata, msg);
> +}
> +
> +static int rk1608_msg_set_stream_out_on(struct rk1608_state *pdata,
> + struct msg *msg, int id)
> +{
> + msg->size = sizeof(struct msg);
> + msg->type = id_msg_set_stream_out_on_t;
> + msg->id.camera_id = pdata->cd[id]->ci.cam_id;
> + msg->mux.sync = 1;
> +
> + return rk1608_send_msg_to_dsp(pdata, msg);
> +}
> +
> +static int rk1608_msg_set_stream_out_off(struct rk1608_state *pdata,
> + struct msg *msg, int id)
> +{
> + msg->size = sizeof(struct msg);
> + msg->type = id_msg_set_stream_out_off_t;
> + msg->id.camera_id = pdata->cd[id]->ci.cam_id;
> + msg->mux.sync = 1;
> +
> + return rk1608_send_msg_to_dsp(pdata, msg);
> +}
> +
> +static int rk1608_set_log_level(struct rk1608_state *pdata,
> + struct msg *msg, int level)
> +{
> + msg->size = sizeof(struct msg);
> + msg->type = id_msg_set_log_level_t;
> + msg->mux.log_level = level;
> +
> + return rk1608_send_msg_to_dsp(pdata, msg);
> +}
> +
> +static int rk1608_init_sensor(struct rk1608_state *pdata, int id)
> +{
> + struct msg *msg;
> + struct msg_init *msg_init;
> + struct msg_in_size *msg_in_size;
> + struct msg_out_size *msg_out_size;
> + int ret;
> +
> + if (!pdata->cd[id]) {
> + dev_err(pdata->dev, "Did not find a sensor[%d]!\n", id);
> + return -EINVAL;
> + }
> +
> + msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> + if (!msg)
> + return -ENOMEM;
> + msg_init = kzalloc(sizeof(*msg_init), GFP_KERNEL);
> + if (!msg_init)
> + return -ENOMEM;
> + msg_in_size = kzalloc(sizeof(*msg_in_size), GFP_KERNEL);
> + if (!msg_in_size)
> + return -ENOMEM;
> + msg_out_size = kzalloc(sizeof(*msg_out_size), GFP_KERNEL);
> + if (!msg_out_size)
> + return -ENOMEM;
> +
> + ret = rk1608_msg_init_sensor(pdata, msg_init, id);
> + ret |= rk1608_msg_set_input_size(pdata, msg_in_size, id);
> + ret |= rk1608_msg_set_output_size(pdata, msg_out_size, id);
> + ret |= rk1608_msg_set_stream_in_on(pdata, msg, id);
> + ret |= rk1608_msg_set_stream_out_on(pdata, msg, id);
> +
> + kfree(msg_init);
> + kfree(msg_in_size);
> + kfree(msg_out_size);
> + kfree(msg);
> + return ret;
> +}
> +
> +static int rk1608_deinit(struct rk1608_state *pdata, int id)
> +{
> + struct msg *msg;
> + int ret;
> +
> + msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> + if (!msg)
> + return -ENOMEM;
> + ret = rk1608_msg_set_stream_out_off(pdata, msg, id);
> + ret |= rk1608_msg_set_stream_in_off(pdata, msg, id);
> + kfree(msg);
> +
> + return ret;
> +}
> +
> +void rk1608_cs_set_value(struct rk1608_state *pdata, int value)
> +{
> + s8 null_cmd = 0;
> + struct spi_transfer null_cmd_packet = {
> + .tx_buf = &null_cmd,
> + .len = sizeof(null_cmd),
> + .cs_change = !value,
> + };
> + struct spi_message m;
> +
> + spi_message_init(&m);
> + spi_message_add_tail(&null_cmd_packet, &m);
> + spi_sync(pdata->spi, &m);
> +}
> +
> +static void rk1608_set_spi_speed(struct rk1608_state *pdata, u32 hz)
> +{
> + pdata->spi->max_speed_hz = hz;
> +}
> +
> +static int rk1608_clk_set(struct rk1608_state *pdata, int on)
> +{
> + if (on) {
> + clk_prepare_enable(pdata->clks.pd_cif);
> + clk_prepare_enable(pdata->clks.aclk_cif);
> + clk_prepare_enable(pdata->clks.hclk_cif);
> + clk_prepare_enable(pdata->clks.cif_clk_in);
> + clk_prepare_enable(pdata->clks.cif_clk_out);
> + clk_prepare_enable(pdata->clks.clk_mipi_24m);
> + clk_prepare_enable(pdata->clks.hclk_mipiphy);
> + clk_set_rate(pdata->clks.cif_clk_out, RK1608_MCLK_RATE);
> + clk_prepare_enable(pdata->clks.mipi_clk);
> + clk_set_rate(pdata->clks.mipi_clk, RK1608_MCLK_RATE);
> + clk_prepare_enable(pdata->clks.mclk);
> + clk_set_rate(pdata->clks.mclk, RK1608_MCLK_RATE);
> + } else if (!on) {
> + clk_disable_unprepare(pdata->clks.pd_cif);
> + clk_disable_unprepare(pdata->clks.aclk_cif);
> + clk_disable_unprepare(pdata->clks.hclk_cif);
> + clk_disable_unprepare(pdata->clks.cif_clk_in);
> + clk_disable_unprepare(pdata->clks.cif_clk_out);
> + clk_disable_unprepare(pdata->clks.clk_mipi_24m);
> + clk_disable_unprepare(pdata->clks.hclk_mipiphy);
> + clk_disable_unprepare(pdata->clks.mipi_clk);
> + clk_disable_unprepare(pdata->clks.mclk);
> + }
> + return 0;
> +}
> +
> +static int rk1608_sensor_power(struct v4l2_subdev *sd, int on)
> +{
> + int ret = 0;
> + struct msg *msg = NULL;
> + struct rk1608_state *pdata = to_state(sd);
> + struct spi_device *spi = pdata->spi;
> +
> + mutex_lock(&pdata->lock);
> + rk1608_clk_set(pdata, on);
> + /* Start Sensor power on/off */
> + if (pdata->cd[0])
> + v4l2_subdev_call(&pdata->cd[0]->sd, core, s_power, on);
> + if (pdata->cd[1])
> + v4l2_subdev_call(&pdata->cd[1]->sd, core, s_power, on);
> +
> + if (on && !pdata->power_count) {
> + /* Request rk1608 enter slave mode */
> + rk1608_cs_set_value(pdata, 0);
> + gpiod_set_value(pdata->gpios.pdown, 1);
> + gpiod_set_value(pdata->gpios.wakeup, 1);
> + gpiod_set_value(pdata->gpios.reset, 1);
> + gpiod_set_value(pdata->gpios.reset, 0);
> + gpiod_set_value(pdata->gpios.reset, 1);
> + /* After Reset pull-up, CSn should keep low for 2ms+ */
> + mdelay(3);
> + rk1608_cs_set_value(pdata, 1);
> + rk1608_lsb_w32(spi, SPI_ENR, 0);
> + rk1608_lsb_w32(spi, SPI_CTRL0,
> + OPM_SLAVE_MODE | RSD_SEL_2CYC | DFS_SEL_16BIT);
> + rk1608_hw_init(pdata->spi);
> + rk1608_set_spi_speed(pdata, pdata->max_speed_hz);
> +
> + /* Download system firmware */
> + ret = rk1608_download_fw(pdata->spi, NULL);
> +
> + if (ret)
> + dev_err(pdata->dev, "Download firmware failed!");
> + else
> + dev_info(pdata->dev, "Download firmware success!");
> +
> + enable_irq(pdata->irq);
> + if (pdata->sleepst_irq > 0)
> + enable_irq(pdata->sleepst_irq);
> + msg = kzalloc(sizeof(*msg), GFP_KERNEL);
> + if (!msg)
> + return -ENOMEM;
> + ret = rk1608_set_log_level(pdata, msg, 2);
> + } else if (!on && pdata->power_count == 1) {
> + kfree(msg);
> + disable_irq(pdata->irq);
> + disable_irq(pdata->sleepst_irq);
> + gpiod_set_value(pdata->gpios.pdown, 0);
> + gpiod_set_value(pdata->gpios.wakeup, 0);
> + gpiod_set_value(pdata->gpios.reset, 0);
> + rk1608_cs_set_value(pdata, 0);
> + }
> + /* Update the power count. */
> + pdata->power_count += on ? 1 : -1;
> + WARN_ON(pdata->power_count < 0);
> + mutex_unlock(&pdata->lock);
> + return ret;
> +}
> +
> +static int rk1608_stream_on(struct rk1608_state *pdata)
> +{
> + int id = 0, cnt = 0, ret = 0;
> +
> + for (id = 0; id < pdata->sensor_nums; id++) {
> + ret = rk1608_init_sensor(pdata, id);
> + if (ret)
> + dev_err(pdata->dev, "Init sensor[%d] is failed!", id);
> + }
> + /* Waiting for the sensor to be ready */
> + while (pdata->sensor_cnt < pdata->sensor_nums) {
> + /* TIMEOUT 10s break*/
Add space before */
> + if (cnt++ > SENSOR_TIMEOUT) {
> + dev_err(pdata->dev, "Sensor%d is ready to timeout!",
> + pdata->sensor_cnt);
> + break;
> + }
> + mdelay(10);
Missing a TAB (wrong indentation).
> + }
> +
> + if (pdata->sensor_nums) {
> + if (pdata->sensor_cnt == pdata->sensor_nums)
> + dev_info(pdata->dev, "Sensor(num %d) is ready!",
> + pdata->sensor_cnt);
> + } else {
> + dev_warn(pdata->dev, "No sensor is found!");
> + }
> +
> + return 0;
> +}
> +
> +static int rk1608_stream_off(struct rk1608_state *pdata)
> +{
> + mutex_lock(&pdata->sensor_lock);
> + pdata->sensor_cnt = 0;
> + mutex_unlock(&pdata->sensor_lock);
> + if (pdata->cd[0])
> + rk1608_deinit(pdata, 0);
> + if (pdata->cd[1])
> + rk1608_deinit(pdata, 1);
> + return 0;
> +}
> +
> +static int rk1608_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + int ret;
> + struct rk1608_state *pdata = to_state(sd);
> +
> + if (enable)
> + ret = rk1608_stream_on(pdata);
> + else
> + ret = rk1608_stream_off(pdata);
> +
> + if (pdata->cd[0])
> + v4l2_subdev_call(&pdata->cd[0]->sd, video, s_stream, enable);
> + if (pdata->cd[1])
> + v4l2_subdev_call(&pdata->cd[1]->sd, video, s_stream, enable);
> + return ret;
> +}
> +
> +static int rk1608_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + struct rk1608_state *pdata = to_state(sd);
> + struct camera_dev *cd = pdata->cd[0];
> +
> + if (code->index > 0)
> + return -EINVAL;
> +
> + code->code = cd->ci.code;
> +
> + return 0;
> +}
> +
> +static int rk1608_get_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct v4l2_mbus_framefmt *mf = &fmt->format;
> + struct rk1608_state *pdata = to_state(sd);
> + struct camera_dev *cd = pdata->cd[0];
> +
> + if (cd) {
> + mf->code = cd->ci.code;
> + mf->width = cd->ci.width;
> + mf->height = cd->ci.height;
> + mf->field = cd->ci.field;
> + mf->colorspace = cd->ci.colorspace;
> + }
> +
> + return 0;
> +}
> +
> +static const struct v4l2_subdev_internal_ops rk1608_subdev_internal_ops = {
> + .open = NULL,
> +};
> +
> +static const struct v4l2_subdev_video_ops rk1608_subdev_video_ops = {
> + .s_stream = rk1608_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops rk1608_subdev_pad_ops = {
> + .enum_mbus_code = rk1608_enum_mbus_code,
> + .get_fmt = rk1608_get_fmt,
> +};
> +
> +static const struct v4l2_subdev_core_ops rk1608_core_ops = {
> + .s_power = rk1608_sensor_power,
> +};
> +
> +static const struct v4l2_subdev_ops rk1608_subdev_ops = {
> + .core = &rk1608_core_ops,
> + .video = &rk1608_subdev_video_ops,
> + .pad = &rk1608_subdev_pad_ops,
> +};
> +
> +/**
> + * rk1608_msq_read_head - read rk1608 msg queue head
> + *
> + * @spi: spi device
> + * @addr: msg queue head addr
> + * @m: msg queue pointer
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_msq_read_head(struct spi_device *spi,
> + u32 addr, struct rk1608_msg_queue *q)
> +{
> + int err = 0;
> + s32 reg;
> +
> + err = rk1608_safe_read(spi, RK1608_PMU_SYS_REG0, ®, 4);
> +
> + if (err || ((reg & RK1608_MSG_QUEUE_OK_MASK) !=
> + RK1608_MSG_QUEUE_OK_TAG))
> + return -EINVAL;
> +
> + err = rk1608_safe_read(spi, addr, (s32 *)q, sizeof(*q));
> +
> + return err;
> +}
> +
> +/**
> + * rk1608_msq_recv_msg - receive a msg from RK1608 -> AP msg queue
> + *
> + * @q: msg queue
> + * @m: a msg pointer buf [out]
> + *
> + * need call rk1608_msq_recv_msg_free to free msg after msg use done
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_msq_recv_msg(struct spi_device *spi, struct msg **m)
> +{
> + struct rk1608_msg_queue queue;
> + struct rk1608_msg_queue *q = &queue;
> + u32 size = 0, msg_size = 0;
> + u32 recv_addr = 0;
> + u32 next_recv_addr = 0;
> + int err = 0;
> +
> + *m = NULL;
> + err = rk1608_msq_read_head(spi, RK1608_S_MSG_QUEUE_ADDR, q);
> + if (err)
> + return err;
> +
> + if (q->cur_send == q->cur_recv)
> + return -EINVAL;
> + /* Skip to head when size is 0 */
> + err = rk1608_safe_read(spi, (s32)q->cur_recv, (s32 *)&size, 4);
> + if (err)
> + return err;
> + if (size == 0) {
> + err = rk1608_safe_read(spi, (s32)q->buf_head, (s32 *)&size, 4);
> + if (err)
> + return err;
> +
> + msg_size = size * sizeof(u32);
> + recv_addr = q->buf_head;
> + next_recv_addr = q->buf_head + msg_size;
> + } else {
> + msg_size = size * sizeof(u32);
> + recv_addr = q->cur_recv;
> + next_recv_addr = q->cur_recv + msg_size;
> + if (next_recv_addr == q->buf_tail)
> + next_recv_addr = q->buf_head;
> + }
> +
> + if (msg_size > (q->buf_tail - q->buf_head))
> + return -EPERM;
> +
> + *m = kmalloc(msg_size, GFP_KERNEL);
> + err = rk1608_safe_read(spi, recv_addr, (s32 *)*m, msg_size);
> + if (err == 0) {
> + err = rk1608_safe_write(spi, RK1608_S_MSG_QUEUE_ADDR +
> + (u8 *)&q->cur_recv - (u8 *)q,
> + &next_recv_addr, 4);
> + }
> + if (err)
> + kfree(*m);
> +
> + return err;
> +}
> +
> +/**
> + * rk1608_msq_tail_free_size - get msg queue tail unused buf size
> + *
> + * @q: msg queue
> + *
> + * It returns size of msg queue tail unused buf size, unit byte
> + */
> +u32 rk1608_msq_tail_free_size(const struct rk1608_msg_queue *q)
> +{
> + if (q->cur_send >= q->cur_recv)
> + return (q->buf_tail - q->cur_send);
> +
> + return q->cur_recv - q->cur_send;
> +}
> +
> +/**
> + * rk1608_interrupt_request - RK1608 request a dsp interrupt
> + *
> + * @spi: spi device
> + * @interrupt_num: interrupt identification
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_interrupt_request(struct spi_device *spi,
> + s32 interrupt_num)
> +{
> + s32 write_reg1_cmd = APB_CMD_WRITE_REG1;
> + struct spi_transfer write_reg1_cmd_packet = {
> + .tx_buf = &write_reg1_cmd,
> + .len = sizeof(write_reg1_cmd),
> + };
> + struct spi_transfer reg1_packet = {
> + .tx_buf = &interrupt_num,
> + .len = sizeof(interrupt_num),
> + };
> + struct spi_message m;
> +
> + spi_message_init(&m);
> + spi_message_add_tail(&write_reg1_cmd_packet, &m);
> + spi_message_add_tail(®1_packet, &m);
> + return spi_sync(spi, &m);
> +}
> +
> +/**
> + * dsp_msq_head_free_size - get msg queue head unused buf size
> + *
> + * @q: msg queue
> + *
> + * It returns size of msg queue head unused buf size, unit byte
> + */
> +static u32 rk1608_msq_head_free_size(const struct rk1608_msg_queue *q)
> +{
> + if (q->cur_send >= q->cur_recv)
> + return (q->cur_recv - q->buf_head);
> +
> + return 0;
> +}
> +
> +/**
> + * rk1608_msq_send_msg - send a msg to Soc -> DSP msg queue
> + *
> + * @spi: spi device
> + * @m: a msg to send
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_msq_send_msg(struct spi_device *spi, struct msg *m)
> +{
> + int err = 0;
> + struct rk1608_msg_queue queue;
> + struct rk1608_msg_queue *q = &queue;
> + u32 msg_size = m->size * sizeof(u32);
> +
> + err = rk1608_msq_read_head(spi, RK1608_R_MSG_QUEUE_ADDR, q);
> + if (err)
> + return err;
> +
> + if (rk1608_msq_tail_free_size(q) > msg_size) {
> + u32 next_send;
> +
> + err = rk1608_safe_write(spi, q->cur_send, (s32 *)m, msg_size);
> + next_send = q->cur_send + msg_size;
> + if (next_send == q->buf_tail)
> + next_send = q->buf_head;
> + q->cur_send = next_send;
> + } else if (rk1608_msq_head_free_size(q) > msg_size) {
> + /* Set size to 0 for skip to head mark */
Missing TAB.
> + err = rk1608_safe_write(spi, q->cur_send, (s32 *)NULL, 4);
> + if (err)
> + return err;
> + err = rk1608_safe_write(spi, q->buf_head, (s32 *)m, msg_size);
> + q->cur_send = q->buf_head + msg_size;
> + } else {
> + return -EPERM;
> + }
> +
> + if (err)
> + return err;
> +
> + err = rk1608_safe_write(spi, RK1608_R_MSG_QUEUE_ADDR +
> + (u8 *)&q->cur_send - (u8 *)q, &q->cur_send, 4);
> + rk1608_interrupt_request(spi, RK1608_IRQ_TYPE_MSG);
> + return err;
> +}
> +
> +static int rk1608_send_msg_to_dsp(struct rk1608_state *pdata, struct msg *m)
> +{
> + int ret = 0, msg_num = 0, timeout = 0, readval = 0;
> +
> + /* For msg sync */
> + if (pdata->msg_num >= 8) {
> + dev_err(pdata->dev, "MSG sync queue full\n!");
> + ret = -EINVAL;
> + } else if (m->mux.sync == 1) {
> + mutex_lock(&pdata->send_msg_lock);
> + msg_num = pdata->msg_num;
> + atomic_set(&pdata->msg_done[pdata->msg_num++], 0);
> + mutex_unlock(&pdata->send_msg_lock);
> + }
> +
> + mutex_lock(&pdata->send_msg_lock);
> + ret = rk1608_msq_send_msg(pdata->spi, m);
> + mutex_unlock(&pdata->send_msg_lock);
> +
> + /* For msg sync */
> + if (m->mux.sync == 1) {
> + readval = atomic_read(&pdata->msg_done[msg_num]);
> + timeout = wait_event_timeout(pdata->msg_wait, readval,
> + MSG_SYNC_TIMEOUT);
> + if (unlikely(timeout <= 0)) {
> + dev_info(pdata->dev, "MSG wait timeout %d msg_num:%d\n",
> + timeout, pdata->msg_num);
> + mutex_lock(&pdata->send_msg_lock);
> + atomic_set(&pdata->msg_done[msg_num], 0);
> + mutex_unlock(&pdata->send_msg_lock);
> + }
> + }
> +
> + return ret;
> +}
> +
> +static void print_rk1608_log(struct rk1608_state *pdata,
> + struct msg *log)
> +{
> + char *str = (char *)(log);
> +
> + str[log->size * sizeof(s32) - 1] = 0;
> + str += sizeof(struct msg);
> + dev_info(pdata->dev, "RK1608(%d): %s", log->id.core_id, str);
> +}
> +
> +static void dispatch_received_msg(struct rk1608_state *pdata,
> + struct msg *msg)
> +{
> + if (msg->type == id_msg_set_stream_out_on_ret_t) {
> + mutex_lock(&pdata->sensor_lock);
> + pdata->sensor_cnt++;
> + mutex_unlock(&pdata->sensor_lock);
> + }
> +
> + if (msg->type == id_msg_rk1608_log_t)
> + print_rk1608_log(pdata, msg);
> +}
> +
> +static irqreturn_t rk1608_threaded_isr(int irq, void *dev_id)
> +{
> + struct rk1608_state *pdata = dev_id;
> + struct msg *msg;
> +
> + WARN_ON(irq != pdata->irq);
> + while (!rk1608_msq_recv_msg(pdata->spi, &msg) && NULL != msg) {
> + dispatch_received_msg(pdata, msg);
> + /* For kernel msg sync */
> + if (pdata->msg_num != 0 && msg->mux.sync) {
> + dev_info(pdata->dev, "RK1608 kernel sync\n");
> + mutex_lock(&pdata->send_msg_lock);
> + pdata->msg_num--;
> + atomic_set(&pdata->msg_done[pdata->msg_num], 1);
> + mutex_unlock(&pdata->send_msg_lock);
> + wake_up(&pdata->msg_wait);
> + }
> + kfree(msg);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t rk1608_sleep_isr(int irq, void *dev_id)
> +{
> + struct rk1608_state *pdata = dev_id;
> +
> + WARN_ON(irq != pdata->sleepst_irq);
> + gpiod_set_value(pdata->gpios.pdown, 0);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int rk1608_parse_dt_property(struct rk1608_state *pdata)
> +{
> + int ret = 0;
> + int i;
> + struct device *dev = pdata->dev;
> + struct device_node *node = dev->of_node;
> +
> + if (!node)
> + return -EPERM;
> +
> + ret = of_property_read_u32(node, "spi-max-frequency",
> + &pdata->max_speed_hz);
> + if (ret) {
> + dev_warn(dev, "Can not get spi-max-frequency!");
> + pdata->max_speed_hz = RK1608_MCLK_RATE;
> + }
> + ret = of_property_read_u64(node, "link-freqs",
> + &pdata->link_freqs);
> + if (ret)
> + dev_warn(dev, "Can not get link_freqs!");
> +
> + pdata->clks.mclk = devm_clk_get(dev, "mclk");
> + if (IS_ERR(pdata->clks.mclk)) {
> + dev_err(dev, "Can not get mclk, error %ld\n",
> + PTR_ERR(pdata->clks.mclk));
> + pdata->clks.mclk = NULL;
> + }
> + pdata->clks.mipi_clk = devm_clk_get(dev, "mipi_clk");
> + if (IS_ERR(pdata->clks.mipi_clk)) {
> + dev_err(dev, "Can not get mipi_clk, error %ld\n",
> + PTR_ERR(pdata->clks.mipi_clk));
> + pdata->clks.mipi_clk = NULL;
> + }
> +
> + pdata->clks.pd_cif = devm_clk_get(dev, "pd_cif");
> + if (IS_ERR(pdata->clks.pd_cif)) {
> + dev_err(dev, "Can not get pd_cif, error %ld\n",
> + PTR_ERR(pdata->clks.pd_cif));
> + pdata->clks.pd_cif = NULL;
> + }
> + pdata->clks.aclk_cif = devm_clk_get(dev, "aclk_cif");
> + if (IS_ERR(pdata->clks.aclk_cif)) {
> + dev_err(dev, "Can not get aclk_cif, error %ld\n",
> + PTR_ERR(pdata->clks.aclk_cif));
> + pdata->clks.aclk_cif = NULL;
> + }
> + pdata->clks.hclk_cif = devm_clk_get(dev, "hclk_cif");
> + if (IS_ERR(pdata->clks.hclk_cif)) {
> + dev_warn(dev, "Can not get hclk_cif, error %ld\n",
> + PTR_ERR(pdata->clks.hclk_cif));
> + pdata->clks.hclk_cif = NULL;
> + }
> + pdata->clks.cif_clk_in = devm_clk_get(dev, "cif0_in");
> + if (IS_ERR(pdata->clks.cif_clk_in)) {
> + dev_err(dev, "Can not get cif_clk_in, error %ld\n",
> + PTR_ERR(pdata->clks.cif_clk_in));
> + pdata->clks.cif_clk_in = NULL;
> + }
> + pdata->clks.cif_clk_out = devm_clk_get(dev, "cif0_out");
> + if (IS_ERR(pdata->clks.cif_clk_out)) {
> + dev_err(dev, "Can not get cif_clk_out, error %ld\n",
> + PTR_ERR(pdata->clks.cif_clk_out));
> + pdata->clks.cif_clk_out = NULL;
> + }
> + pdata->clks.clk_mipi_24m = devm_clk_get(dev, "clk_mipi_24m");
> + if (IS_ERR(pdata->clks.clk_mipi_24m)) {
> + dev_err(dev, "Can not get clk_mipi_24m, error %ld\n",
> + PTR_ERR(pdata->clks.clk_mipi_24m));
> + pdata->clks.clk_mipi_24m = NULL;
> + }
> + pdata->clks.hclk_mipiphy = devm_clk_get(dev, "hclk_mipiphy");
> + if (IS_ERR(pdata->clks.hclk_mipiphy)) {
> + dev_err(dev, "Can not get hclk_mipiphy, error %ld\n",
> + PTR_ERR(pdata->clks.hclk_mipiphy));
> + pdata->clks.hclk_mipiphy = NULL;
> + }
> +
> + pdata->gpios.reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->gpios.reset)) {
> + dev_err(dev, "Could not get reset gpio\n");
> + return PTR_ERR(pdata->gpios.reset);
> + }
> +
> + pdata->gpios.pdown = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->gpios.pdown)) {
> + dev_err(dev, "Could not get powerdown gpio\n");
> + return PTR_ERR(pdata->gpios.pdown);
> + }
> +
> + pdata->gpios.wakeup = devm_gpiod_get(dev, "wakeup", GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->gpios.wakeup)) {
> + dev_err(dev, "Could not get wakeup gpio\n");
> + return PTR_ERR(pdata->gpios.wakeup);
> + }
> +
> + pdata->gpios.irq = devm_gpiod_get(dev, "irq", GPIOD_IN);
> + if (IS_ERR(pdata->gpios.irq)) {
> + dev_err(dev, "Could not get irq gpio\n");
> + return PTR_ERR(pdata->gpios.irq);
> + }
> + ret = gpiod_to_irq(pdata->gpios.irq);
> + if (ret < 0) {
> + dev_err(dev, "Get irq number for GPIO error %d\n", ret);
> + return ret;
> + }
> + pdata->irq = ret;
> + ret = request_threaded_irq(pdata->irq, NULL, rk1608_threaded_isr,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "rk1608-irq", pdata);
> + if (ret) {
> + dev_err(dev, "Cannot request thread irq: %d\n", ret);
> + return ret;
> + }
> +
> + disable_irq(pdata->irq);
> +
> + pdata->gpios.sleepst = devm_gpiod_get(dev, "sleepst", GPIOD_IN);
> + if (IS_ERR(pdata->gpios.sleepst)) {
> + dev_err(dev, "Could not get powerdown gpio\n");
> + return PTR_ERR(pdata->gpios.sleepst);
> + }
> + ret = gpiod_to_irq(pdata->gpios.sleepst);
> + if (ret < 0) {
> + dev_err(dev, "Get irq number for GPIO error%d\n", ret);
> + return ret;
> + }
> + pdata->sleepst_irq = ret;
> + ret = request_any_context_irq(pdata->sleepst_irq,
> + rk1608_sleep_isr,
> + IRQF_TRIGGER_RISING,
> + "rk1608-sleepst", pdata);
> + disable_irq(pdata->sleepst_irq);
> +
> + pdata->msg_num = 0;
> + init_waitqueue_head(&pdata->msg_wait);
> + for (i = 0; i < 8; i++)
> + atomic_set(&pdata->msg_done[i], 0);
> +
> + return ret;
> +}
> +
> +static int get_remote_node_dev(struct rk1608_state *pdev)
> +{
> + struct i2c_client *sensor_pdev = NULL;
> + struct device *dev = pdev->dev;
> + struct device_node *parent = dev->of_node;
> + struct device_node *node, *pre_node = NULL;
> + struct device_node *remote = NULL;
> + int ret = 0, sensor_nums = 0;
> +
> + node = of_graph_get_next_endpoint(parent, pre_node);
> + if (node) {
> + of_node_put(pre_node);
> + pre_node = node;
> + } else {
> + dev_err(dev, "Failed to get endpoint\n");
> + return -EINVAL;
> + }
> + while ((node = of_graph_get_next_endpoint(parent, pre_node)) != NULL) {
> + of_node_put(pre_node);
> + pre_node = node;
> + remote = of_graph_get_remote_port_parent(node);
> + if (!remote) {
> + dev_err(dev, "Invalid Sensor device\n");
> + of_node_put(remote);
> + ret = -EINVAL;
> + }
> +
> + sensor_pdev = of_find_i2c_device_by_node(remote);
> + of_node_put(remote);
> +
> + if (!sensor_pdev) {
> + dev_err(dev, "Failed to get Sensor device\n");
> + ret = -EINVAL;
> + } else {
> + pdev->cd[sensor_nums] = i2c_get_clientdata(sensor_pdev);
> + if (pdev->cd[sensor_nums])
> + sensor_nums++;
> + else
> + dev_err(dev, "Failed to get Sensor drvdata\n");
> + ret = 0;
> + }
> + }
> + pdev->sensor_nums = sensor_nums;
> + if (pdev->sensor_nums)
> + dev_info(dev, "Get Sensor (nums=%d) dev is OK!\n",
> + pdev->sensor_nums);
> +
> + return ret;
> +}
> +
> +static int rk1608_probe(struct spi_device *spi)
> +{
> + struct rk1608_state *rk1608;
> + struct v4l2_subdev *sd;
> + struct v4l2_ctrl_handler *handler;
> + int ret = 0;
> +
> + rk1608 = devm_kzalloc(&spi->dev, sizeof(*rk1608), GFP_KERNEL);
> + if (!rk1608)
> + return -ENOMEM;
> + rk1608->dev = &spi->dev;
> + rk1608->spi = spi;
> + spi_set_drvdata(spi, rk1608);
> + ret = rk1608_parse_dt_property(rk1608);
> + if (ret) {
> + dev_err(rk1608->dev, "RK1608 parse dt property err(%x)\n", ret);
Add space before (%x)
> + goto parse_err;
> + }
> + ret = get_remote_node_dev(rk1608);
> + if (ret)
> + dev_warn(rk1608->dev, "Get remote node dev err(%x)\n", ret);
ditto.
> + rk1608->sensor_cnt = 0;
> + mutex_init(&rk1608->sensor_lock);
> + mutex_init(&rk1608->send_msg_lock);
> + mutex_init(&rk1608->lock);
> + sd = &rk1608->sd;
> + v4l2_spi_subdev_init(sd, spi, &rk1608_subdev_ops);
> +
> + handler = &rk1608->ctrl_handler;
> + ret = v4l2_ctrl_handler_init(handler, 1);
> + if (ret)
> + goto handler_init_err;
> +
> + rk1608->link_freq = v4l2_ctrl_new_int_menu(handler, NULL,
> + V4L2_CID_LINK_FREQ,
> + 0, 0, &rk1608->link_freqs);
> + if (rk1608->link_freq)
> + rk1608->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + if (handler->error)
> + goto handler_err;
> +
> + sd->ctrl_handler = handler;
> + sd->internal_ops = &rk1608_subdev_internal_ops;
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> +
> + rk1608->pad.flags = MEDIA_PAD_FL_SOURCE;
> + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +
> + ret = media_entity_pads_init(&sd->entity, 1, &rk1608->pad);
> + if (ret < 0)
> + goto handler_err;
> +
> + ret = v4l2_async_register_subdev(sd);
> + if (ret < 0)
> + goto register_err;
> + dev_info(rk1608->dev, "DSP RK1608 Driver probe is OK!\n");
> +
> + return 0;
> +register_err:
> + media_entity_cleanup(&sd->entity);
> +handler_err:
> + v4l2_ctrl_handler_free(handler);
> +handler_init_err:
> + mutex_destroy(&rk1608->lock);
> + mutex_destroy(&rk1608->send_msg_lock);
> + mutex_destroy(&rk1608->sensor_lock);
> +parse_err:
> + kfree(rk1608);
> + return ret;
> +}
> +
> +static int rk1608_remove(struct spi_device *spi)
> +{
> + struct rk1608_state *rk1608 = spi_get_drvdata(spi);
> +
> + v4l2_async_unregister_subdev(&rk1608->sd);
> + media_entity_cleanup(&rk1608->sd.entity);
> + v4l2_ctrl_handler_free(&rk1608->ctrl_handler);
> + mutex_destroy(&rk1608->lock);
> + mutex_destroy(&rk1608->send_msg_lock);
> + mutex_destroy(&rk1608->sensor_lock);
> + kfree(rk1608);
> +
> + return 0;
> +}
> +
> +static const struct spi_device_id rk1608_id[] = {
> + { "RK1608", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(spi, rk1608_id);
> +
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id rk1608_of_match[] = {
> + { .compatible = "rockchip,rk1608" },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, rk1608_of_match);
> +#endif
> +
> +static struct spi_driver rk1608_driver = {
> + .driver = {
> + .of_match_table = of_match_ptr(rk1608_of_match),
> + .name = "RK1608",
> + },
> + .probe = rk1608_probe,
> + .remove = rk1608_remove,
> + .id_table = rk1608_id,
> +};
> +
> +module_spi_driver(rk1608_driver);
> +
> +MODULE_AUTHOR("Rockchip Camera/ISP team");
> +MODULE_DESCRIPTION("A DSP driver for rk1608 chip");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/media/spi/rk1608.h b/drivers/media/spi/rk1608.h
> new file mode 100644
> index 0000000..5cb7d62
> --- /dev/null
> +++ b/drivers/media/spi/rk1608.h
> @@ -0,0 +1,442 @@
> +/**
> + * Rockchip rk1608 driver
> + *
> + * SPDX-License-Identifier: GPL-2.0
This should be in a single /* */ comment line at the start of the header.
See e.g. include/media/cec.h
> + *
> + * Copyright (C) 2017 Rockchip Electronics Co., Ltd.
> + *
> + */
> +
> +#ifndef __RK1608_H__
> +#define __RK1608_H__
> +
> +#include <linux/i2c.h>
> +#include <linux/string.h>
> +#include <linux/spi/spi.h>
> +#include <linux/types.h>
> +
> +#define RK1608_OP_TRY_MAX 3
> +#define RK1608_OP_TRY_DELAY 10
> +#define RK1608_CMD_WRITE 0x00000011
> +#define RK1608_CMD_WRITE_REG0 0X00010011
> +#define RK1608_CMD_WRITE_REG1 0X00020011
> +#define RK1608_CMD_READ 0x00000077
> +#define RK1608_CMD_READ_BEGIN 0x000000aa
> +#define RK1608_CMD_QUERY 0x000000ff
> +#define RK1608_CMD_QUERY_REG2 0x000001ff
> +#define RK1608_STATE_ID_MASK 0xffff0000
> +#define RK1608_STATE_ID 0X16080000
> +#define RK1608_STATE_MASK 0x0000ffff
> +#define APB_CMD_WRITE_REG1 0X00020011
> +#define RK1608_R_MSG_QUEUE_ADDR 0x60050000
> +
> +#define RK1608_IRQ_TYPE_MSG 0x12345678
> +#define BOOT_REQUEST_ADDR 0x18000010
> +#define RK1608_HEAD_ADDR 0x60000000
> +#define RK1608_FW_NAME "rk1608.rkl"
> +#define RK1608_S_MSG_QUEUE_ADDR 0x60050010
> +#define RK1608_PMU_SYS_REG0 0x120000f0
> +#define RK1608_MSG_QUEUE_OK_MASK 0xffff0001
> +#define RK1608_MSG_QUEUE_OK_TAG 0x16080001
> +#define RK1608_MAX_OP_BYTES 60000
> +#define MSG_SYNC_TIMEOUT 50
> +
> +#define BOOT_FLAG_CRC (0x01 << 0)
> +#define BOOT_FLAG_EXE (0x01 << 1)
> +#define BOOT_FLAG_LOAD_PMEM (0x01 << 2)
> +#define BOOT_FLAG_ACK (0x01 << 3)
> +#define BOOT_FLAG_READ_WAIT (0x01 << 4)
> +#define BOOT_FLAG_BOOT_REQUEST (0x01 << 5)
> +
> +#define DEBUG_DUMP_ALL_SEND_RECV_MSG 0
> +#define RK1608_MCLK_RATE (24 * 1000 * 1000ul)
> +#define SENSOR_TIMEOUT 1000
> +
> +#define OPM_SLAVE_MODE 0X100000
> +#define RSD_SEL_2CYC 0X008000
> +#define DFS_SEL_16BIT 0X000002
> +#define SPI_CTRL0 0x11060000
> +#define SPI_ENR 0x11060008
> +#define CRUPMU_CLKSEL14_CON 0x12008098
> +#define PMUGRF_GPIO1A_E 0x12030040
> +#define PMUGRF_GPIO1B_E 0x12030044
> +#define BIT7_6_SEL_8MA 0xf000a000
> +#define BIT1_0_SEL_8MA 0x000f000a
> +#define SPI0_PLL_SEL_APLL 0xff004000
> +#define INVALID_ID -1
> +#define RK1608_MAX_SEC_NUM 10
> +
> +#ifndef MIN
> +#define MIN(a, b) ((a) < (b) ? (a) : (b))
> +#endif
Please don't define this. Just use the macros from linux/kernel.h
> +
> +#ifndef MSB2LSB32
> +#define MSB2LSB32(x) ((((u32)x & 0x80808080) >> 7) | \
> + (((u32)x & 0x40404040) >> 5) | \
> + (((u32)x & 0x20202020) >> 3) | \
> + (((u32)x & 0x10101010) >> 1) | \
> + (((u32)x & 0x08080808) << 1) | \
> + (((u32)x & 0x04040404) << 3) | \
> + (((u32)x & 0x02020202) << 5) | \
> + (((u32)x & 0x01010101) << 7))
Can't you use swab32? But I suspect you really want to use
cpu_to_be32s(). That way you are independent of the endianness of the
platform.
> +#endif
> +
> +struct camera_info {
> + s8 cam_id;
> + s8 in_mipi;
> + s8 out_mipi;
> + s8 mipi_lane;
> + u8 i2c_bus;
> + u8 data_type;
> + u8 field;
> + u8 colorspace;
> + u16 code;
> + u16 width;
> + u16 height;
> + u16 htotal;
> + u16 vtotal;
> + u32 mipi_clock;
> +};
> +
> +struct camera_dev {
> + struct v4l2_subdev sd;
> + struct i2c_client *client;
> + struct mutex lock; /*lock resource*/
> + struct camera_info ci;
> +};
> +
> +struct rk1608_clks {
> + struct clk *mclk;
> + struct clk *mipi_clk;
> + struct clk *pd_cif;
> + struct clk *aclk_cif;
> + struct clk *hclk_cif;
> + struct clk *cif_clk_in;
> + struct clk *cif_clk_out;
> + struct clk *clk_mipi_24m;
> + struct clk *hclk_mipiphy;
> +};
> +
> +struct rk1608_gpios {
> + struct gpio_desc *reset;
> + struct gpio_desc *irq;
> + struct gpio_desc *sleepst;
> + struct gpio_desc *wakeup;
> + struct gpio_desc *pdown;
> +};
> +
> +struct rk1608_state {
> + struct v4l2_subdev sd;
> + struct media_pad pad;
> + struct mutex lock; /* protect resource */
> + struct mutex sensor_lock; /* protect sensor */
> + struct mutex send_msg_lock; /* protect msg */
> + struct rk1608_clks clks;
> + struct rk1608_gpios gpios;
> + struct camera_dev *cd[2];
> + struct device *dev;
> + struct spi_device *spi;
> + int power_count;
> + int irq;
> + int sleepst_irq;
> + int msg_num;
> + u32 sensor_cnt;
> + u32 sensor_nums;
> + u32 max_speed_hz;
> + atomic_t msg_done[8];
> + wait_queue_head_t msg_wait;
> + struct v4l2_ctrl *link_freq;
> + struct v4l2_ctrl_handler ctrl_handler;
> + s64 link_freqs;
> +};
> +
> +struct rk1608_section {
> + union {
> + u32 offset;
> + u32 wait_value;
> + };
> + u32 size;
> + union {
> + u32 load_addr;
> + u32 wait_addr;
> + };
> + u16 wait_time;
> + u16 timeout;
> + u16 crc_16;
> + u8 flag;
> + u8 type;
> +};
> +
> +struct rk1608_header {
> + char version[32];
> + u32 header_size;
> + u32 section_count;
> + struct rk1608_section sections[RK1608_MAX_SEC_NUM];
> +};
> +
> +struct rk1608_boot_req {
> + u32 flag;
> + u32 load_addr;
> + u32 boot_len;
> + u8 status;
> + u8 dummy[2];
> + u8 cmd;
> +};
> +
> +struct rk1608_msg_queue {
> + u32 buf_head; /* msg buffer head */
> + u32 buf_tail; /* msg buffer tail */
> + u32 cur_send; /* current msg send position */
> + u32 cur_recv; /* current msg receive position */
> +};
> +
> +struct msg {
> + u32 size; /* unit 4 bytes */
> + u16 type;
> + union {
> + u8 camera_id;
> + u8 core_id;
> + } id;
> + union {
> + u8 sync;
> + u8 log_level;
> + s8 err;
> + } mux;
> +};
> +
> +struct msg_init {
> + struct msg msg_head;
> + u32 i2c_bus;
> + u32 i2c_clk;
> + s8 in_mipi_phy;
> + s8 out_mipi_phy;
> + s8 mipi_lane;
> + s8 bayer;
> + u8 sensor_name[32];
> + u8 i2c_slave_addr;
> +};
> +
> +struct msg_in_size {
> + struct msg msg_head;
> + s8 data_type;
> + s8 decode_format;
> + s8 flag;
> + s8 unused;
> + u16 width;
> + u16 height;
> +};
> +
> +struct msg_out_size {
> + struct msg msg_head;
> + u16 width;
> + u16 height;
> + u32 mipi_clk;
> + u16 line_length_pclk;
> + u16 frame_length_lines;
> +};
> +
> +enum {
> + /* AP -> RK1608
> + * msg of sensor
> + */
> + id_msg_init_sensor_t = 0x0001,
> + id_msg_set_input_size_t,
> + id_msg_set_output_size_t,
> + id_msg_set_stream_in_on_t,
> + id_msg_set_stream_in_off_t,
> + id_msg_set_stream_out_on_t,
> + id_msg_set_stream_out_off_t,
> +
> + /* AP -> RK1608
> + * msg of take picture
> + */
> + id_msg_take_picture_t = 0x0021,
> + id_msg_take_picture_done_t,
> +
> + /* AP -> RK1608
> + * msg of realtime parameter
> + */
> + id_msg_rt_args_t = 0x0031,
> +
> + /* AP -> RK1608
> + * msg of power manager
> + */
> + id_msg_set_sys_mode_bypass_t = 0x0200,
> + id_msg_set_sys_mode_standby_t,
> + id_msg_set_sys_mode_idle_enable_t,
> + id_msg_set_sys_mode_idle_disable_t,
> + id_msg_set_sys_mode_slave_rk1608_on_t,
> + id_msg_set_sys_mode_slave_rk1608_off_t,
> +
> + /* AP -> RK1608
> + * msg of debug config
> + */
> + id_msg_set_log_level_t = 0x0250,
> +
> + /* RK1608 -> AP
> + * response of sensor msg
> + */
> + id_msg_init_sensor_ret_t = 0x0301,
> + id_msg_set_input_size_ret_t,
> + id_msg_set_output_size_ret_t,
> + id_msg_set_stream_in_on_ret_t,
> + id_msg_set_stream_in_off_ret_t,
> + id_msg_set_stream_out_on_ret_t,
> + id_msg_set_stream_out_off_ret_t,
> +
> + /* RK1608 -> AP
> + * response of take picture msg
> + */
> + id_msg_take_picture_ret_t = 0x0320,
> + id_msg_take_picture_done_ret_t,
> +
> + /* RK1608 -> AP
> + * response of realtime parameter msg
> + */
> + id_msg_rt_args_ret_t = 0x0330,
> +
> + /* RK1608 -> AP */
> + id_msg_do_i2c_t = 0x0390,
> + /* AP -> rk1608 */
> + id_msg_do_i2c_ret_t,
> +
> + /* RK1608 -> AP
> + * msg of print log
> + */
> + id_msg_rk1608_log_t = 0x0400,
> +
> + /* dsi2csi dump */
> + id_msg_dsi2sci_rgb_dump_t = 0x6000,
> + id_msg_dsi2sci_nv12_dump_t = 0x6001,
> +
> + /* RK1608 -> AP
> + * msg of xfile
> + */
> + id_msg_xfile_import_t = 0x8000 + 0x0600,
> + id_msg_xfile_export_t,
> + id_msg_xfile_mkdir_t
> +};
> +
> +static int rk1608_send_msg_to_dsp(struct rk1608_state *pdata, struct msg *m);
> +/**
> + * rk1608_write - RK1608 synchronous write
> + *
> + * @spi: spi device
> + * @addr: resource address
> + * @data: data buffer
> + * @data_len: data buffer size, in bytes
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_write(struct spi_device *spi, s32 addr,
> + const s32 *data, size_t data_len);
> +
> +/**
> + * rk1608_safe_write - RK1608 synchronous write with state check
> + *
> + * @spi: spi device
> + * @addr: resource address
> + * @data: data buffer
> + * @data_len: data buffer size, in bytes
> + * Context: can sleep
> + *
> + * It returns zero on success, else operation state code.
> + */
> +static int rk1608_safe_write(struct spi_device *spi,
> + s32 addr, const s32 *data, size_t data_len);
> +
> +/**
> + * rk1608_read - RK1608 synchronous read
> + *
> + * @spi: spi device
> + * @addr: resource address
> + * @data: data buffer [out]
> + * @data_len: data buffer size, in bytes
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_read(struct spi_device *spi, s32 addr,
> + s32 *data, size_t data_len);
> +
> +/**
> + * rk1608_safe_read - RK1608 synchronous read with state check
> + *
> + * @spi: spi device
> + * @addr: resource address
> + * @data: data buffer [out]
> + * @data_len: data buffer size, in bytes
> + * Context: can sleep
> + *
> + * It returns zero on success, else operation state code.
> + */
> +static int rk1608_safe_read(struct spi_device *spi,
> + s32 addr, s32 *data, size_t data_len);
> +
> +/**
> + * rk1608_operation_query - RK1608 last operation state query
> + *
> + * @spi: spi device
> + * @state: last operation state [out]
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_operation_query(struct spi_device *spi, s32 *state);
> +
> +/**
> + * rk1608_interrupt_request - RK1608 request a rk1608 interrupt
> + *
> + * @spi: spi device
> + * @interrupt_num: interrupt identification
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_interrupt_request(struct spi_device *spi,
> + s32 interrupt_num);
> +
> +static int rk1608_read_wait(struct spi_device *spi,
> + const struct rk1608_section *sec);
> +
> +static int rk1608_boot_request(struct spi_device *spi,
> + const struct rk1608_section *sec);
> +
> +static int rk1608_download_section(struct spi_device *spi, const u8 *data,
> + const struct rk1608_section *sec);
> +/**
> + * rk1608_download_fw: - rk1608 firmware download through spi
> + *
> + * @spi: spi device
> + * @fw_name: name of firmware file, NULL for default firmware name
> + * Context: can sleep
> + *
> + * It returns zero on success, else a negative error code.
> + **/
> +static int rk1608_download_fw(struct spi_device *spi, const char *fw_name);
> +
> +/**
> + * rk1608_msq_read_head - read rk1608 msg queue head
> + *
> + * @spi: spi device
> + * @addr: msg queue head addr
> + * @m: msg queue pointer
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_msq_read_head(struct spi_device *spi,
> + u32 addr, struct rk1608_msg_queue *q);
> +
> +/**
> + * rk1608_msq_recv_msg - receive a msg from RK1608 -> AP msg queue
> + *
> + * @q: msg queue
> + * @m: a msg pointer buf [out]
> + *
> + * need call rk1608_msq_free_received_msg to free msg after msg use done
> + *
> + * It returns zero on success, else a negative error code.
> + */
> +static int rk1608_msq_recv_msg(struct spi_device *spi, struct msg **m);
> +#endif
>
Regards,
Hans
