On Sun, Dec 03, 2000 at 06:15:24PM -0700, Jeff V. Merkey wrote:
>
>
> On a four processor POCA system with dual Fast-SCSI AHA274X/VLB bus
> controllers I am seeing the following timeout errors right after
> the sequencer scripts are downloaded and the driver starts polling.
> It does not happen when compiled in kernel, only when loaded from
> an initrd image. The root FS is getting mounted properly and
> probing and loading the driver.
>
> aborting command due to timeout: pid 00 scsi 00 channel 00 lun 00
> inquiry 00 00 00 ff 00
>
> The machine then hard hangs after it gets this error and has to be
> powered off in order to reboot it.
I tested 2.2.18-24 with an initrd and works fine on the same hardware,
BTW
Jeff
>
> Jeff
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
