CONFIG_SOUND, CONFIG_SND, CONFIG_SOUND_PRIME, ...:
Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

CONFIG_SND_*_DRIVERS:
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <[EMAIL PROTECTED]>

---
 sound/Kconfig     |   11 +++++------
 sound/oss/Kconfig |   39 +++++++++++++++++++--------------------
 2 files changed, 24 insertions(+), 26 deletions(-)

Index: linux-2.6.22-rc3/sound/Kconfig
===================================================================
--- linux-2.6.22-rc3.orig/sound/Kconfig
+++ linux-2.6.22-rc3/sound/Kconfig
@@ -80,19 +80,18 @@ source "sound/soc/Kconfig"
 
 endif # SND
 
-menu "Open Sound System"
-       depends on SOUND!=n
-
-config SOUND_PRIME
+menuconfig SOUND_PRIME
        tristate "Open Sound System (DEPRECATED)"
        help
          Say 'Y' or 'M' to enable Open Sound System drivers.
 
+if SOUND_PRIME
+
 source "sound/oss/Kconfig"
 
-endmenu
+endif # SOUND_PRIME
 
-endif
+endif # !M68K
 
 config AC97_BUS
        tristate
Index: linux-2.6.22-rc3/sound/oss/Kconfig
===================================================================
--- linux-2.6.22-rc3.orig/sound/oss/Kconfig
+++ linux-2.6.22-rc3/sound/oss/Kconfig
@@ -7,7 +7,6 @@
 
 config OSS_OBSOLETE
        bool "Obsolete OSS drivers"
-       depends on SOUND_PRIME
        help
          This option enables support for obsolete OSS drivers that
          are scheduled for removal in the near future.
@@ -20,7 +19,7 @@ config OSS_OBSOLETE
 
 config SOUND_BT878
        tristate "BT878 audio dma"
-       depends on SOUND_PRIME && PCI && OSS_OBSOLETE
+       depends on PCI && OSS_OBSOLETE
        ---help---
          Audio DMA support for bt878 based grabber boards.  As you might have
          already noticed, bt878 is listed with two functions in /proc/pci.
@@ -36,7 +35,7 @@ config SOUND_BT878
 
 config SOUND_BCM_CS4297A
        tristate "Crystal Sound CS4297a (for Swarm)"
-       depends on SOUND_PRIME && SIBYTE_SWARM
+       depends on SIBYTE_SWARM
        help
          The BCM91250A has a Crystal CS4297a on synchronous serial
          port B (in addition to the DB-9 serial port).  Say Y or M
@@ -46,14 +45,14 @@ config SOUND_BCM_CS4297A
 
 config SOUND_ICH
        tristate "Intel ICH (i8xx) audio support"
-       depends on SOUND_PRIME && PCI && OSS_OBSOLETE
+       depends on PCI && OSS_OBSOLETE
        help
          Support for integral audio in Intel's I/O Controller Hub (ICH)
          chipset, as used on the 810/820/840 motherboards.
 
 config SOUND_VWSND
        tristate "SGI Visual Workstation Sound"
-       depends on SOUND_PRIME && X86_VISWS
+       depends on X86_VISWS
        help
          Say Y or M if you have an SGI Visual Workstation and you want to be
          able to use its on-board audio.  Read
@@ -62,14 +61,14 @@ config SOUND_VWSND
 
 config SOUND_HAL2
        tristate "SGI HAL2 sound (EXPERIMENTAL)"
-       depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
+       depends on SGI_IP22 && EXPERIMENTAL
        help
          Say Y or M if you have an SGI Indy or Indigo2 system and want to be 
able to
          use its on-board A2 audio system.
 
 config SOUND_VRC5477
        tristate "NEC Vrc5477 AC97 sound"
-       depends on SOUND_PRIME && DDB5477
+       depends on DDB5477
        help
          Say Y here to enable sound support for the NEC Vrc5477 chip, an
          integrated, multi-function controller chip for MIPS CPUs.  Works
@@ -78,11 +77,11 @@ config SOUND_VRC5477
 config SOUND_AU1550_AC97
        tristate "Au1550/Au1200 AC97 Sound"
        select SND_AC97_CODEC
-       depends on SOUND_PRIME && (SOC_AU1550 || SOC_AU1200)
+       depends on SOC_AU1550 || SOC_AU1200
 
 config SOUND_TRIDENT
        tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
-       depends on SOUND_PRIME && PCI
+       depends on PCI
        ---help---
          Say Y or M if you have a PCI sound card utilizing the Trident
          4DWave-DX/NX chipset or your mother board chipset has SiS 7018
@@ -123,7 +122,7 @@ config SOUND_TRIDENT
 
 config SOUND_MSNDCLAS
        tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
-       depends on SOUND_PRIME && (m || !STANDALONE)
+       depends on m || !STANDALONE
        help
          Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
          Monterey (not for the Pinnacle or Fiji).
@@ -134,7 +133,7 @@ config SOUND_MSNDCLAS
          at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
 
 comment "Compiled-in MSND Classic support requires firmware during 
compilation."
-       depends on SOUND_PRIME && SOUND_MSNDCLAS=y
+       depends on SOUND_MSNDCLAS=y
 
 config MSNDCLAS_HAVE_BOOT
        bool
@@ -187,7 +186,7 @@ config MSNDCLAS_IO
 
 config SOUND_MSNDPIN
        tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
-       depends on SOUND_PRIME && (m || !STANDALONE)
+       depends on m || !STANDALONE
        help
          Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
          See <file:Documentation/sound/oss/MultiSound> for important 
information
@@ -196,7 +195,7 @@ config SOUND_MSNDPIN
          at <http://www.turtlebeach.com/site/kb_ftp/600.asp>.
 
 comment "Compiled-in MSND Pinnacle support requires firmware during 
compilation."
-       depends on SOUND_PRIME && SOUND_MSNDPIN=y
+       depends on SOUND_MSNDPIN=y
 
 config MSNDPIN_HAVE_BOOT
        bool
@@ -273,7 +272,7 @@ config MSNDPIN_NONPNP
          configure the card's resources.
 
 comment "MSND Pinnacle DSP section will be configured to above parameters."
-       depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
+       depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP
 
 config MSNDPIN_CFG
        hex "MSND Pinnacle config port 250,260,270"
@@ -286,7 +285,7 @@ config MSNDPIN_CFG
          Mode".
 
 comment "Pinnacle-specific Device Configuration (0 disables)"
-       depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
+       depends on SOUND_MSNDPIN=y && MSNDPIN_NONPNP
 
 config MSNDPIN_MPU_IO
        hex "MSND Pinnacle MPU I/O (e.g. 330)"
@@ -338,7 +337,7 @@ config MSNDPIN_JOYSTICK_IO
 
 config MSND_FIFOSIZE
        int "MSND buffer size (kB)"
-       depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y)
+       depends on SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y
        default "128"
        help
          Configures the size of each audio buffer, in kilobytes, for
@@ -348,7 +347,7 @@ config MSND_FIFOSIZE
 
 config SOUND_VIA82CXXX
        tristate "VIA 82C686 Audio Codec"
-       depends on SOUND_PRIME && PCI && OSS_OBSOLETE
+       depends on PCI && OSS_OBSOLETE
        help
          Say Y here to include support for the audio codec found on VIA
          82Cxxx-based chips. Typically these are built into a motherboard.
@@ -368,7 +367,7 @@ config MIDI_VIA82CXXX
 
 config SOUND_OSS
        tristate "OSS sound modules"
-       depends on SOUND_PRIME && ISA_DMA_API
+       depends on ISA_DMA_API
        help
          OSS is the Open Sound System suite of sound card drivers.  They make
          sound programming easier since they provide a common API.  Say Y or
@@ -721,7 +720,7 @@ config SOUND_WAVEARTIST
 
 config SOUND_TVMIXER
        tristate "TV card (bt848) mixer support"
-       depends on SOUND_PRIME && I2C && VIDEO_V4L1 && OSS_OBSOLETE
+       depends on I2C && VIDEO_V4L1 && OSS_OBSOLETE
        help
          Support for audio mixer facilities on the BT848 TV frame-grabber
          card.
@@ -732,7 +731,7 @@ config SOUND_KAHLUA
 
 config SOUND_SH_DAC_AUDIO
        tristate "SuperH DAC audio support"
-       depends on SOUND_PRIME && CPU_SH3
+       depends on CPU_SH3
 
 config SOUND_SH_DAC_AUDIO_CHANNEL
        int "DAC channel"
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to