[PATCH] ARM: davinci: fix the GPIO lookup for omapl138-hawk

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszew...@baylibre.com>

The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios.

Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
---
 arch/arm/mach-davinci/board-omapl138-hawk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c 
b/arch/arm/mach-davinci/board-omapl138-hawk.c
index a3e78074be70..62eb7d668890 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -127,8 +127,8 @@ static struct gpiod_lookup_table mmc_gpios_table = {
        .dev_id = "da830-mmc.0",
        .table = {
                /* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/
-               GPIO_LOOKUP("davinci_gpio.1", 28, "cd", GPIO_ACTIVE_LOW),
-               GPIO_LOOKUP("davinci_gpio.1", 29, "wp", GPIO_ACTIVE_LOW),
+               GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW),
+               GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW),
        },
 };
 
-- 
2.16.1