This patch-set adds S/PDIF IEC6958 protocol support to STM32 SAI.
Only S/PDIF playback is supported here, as SAI peripheral does not support
S/PDIF capture.
SAI peripheral does not take as input full IEC60958 frames as it generates
preamble and parity bit.
However, it cannot handle raw PCM data, as it is not designed to insert channel
status and user data
in the generated IEC frames.
Moreover, SAI data register format does not match exactly IEC60958 subframe
format.
(see figure below). Channel status (C) and User data (U) are at 26-25 bits
position,
in data register, instead of 30-29 bits position.
IEC60958 subframe bits:
31-28 27-4 3-0
P C U V data (16|24 bits) preamble
SAI data register format:
27-24 23-0
P C U V data (16|24 bits)
The impact in software is that the data have to be processed before DMA
transfer.
These constraints should be managed at driver level to minimize the impact on
application.
This means that a callback is necessary to perform data processing (shift and
channel status insertion)
This patch-set introduces a callback to allow processing on samples.
The implementation is based on previous discussions available here:
https://patchwork.kernel.org/patch/9570255/
BRs
Olivier
Olivier Moysan (3):
ASoC: stm32: Add S/PDIF to SAI bindings
ASoC: dmaengine_pcm: add processing support
ASoC: stm32: sai: Add support of S/PDIF playback
.../devicetree/bindings/sound/st,stm32-sai.txt | 6 +
include/sound/dmaengine_pcm.h | 3 +
sound/soc/soc-generic-dmaengine-pcm.c | 62 ++++++++-
sound/soc/stm/stm32_sai.c | 2 +
sound/soc/stm/stm32_sai.h | 2 +
sound/soc/stm/stm32_sai_sub.c | 153 +++++++++++++++++----
6 files changed, 202 insertions(+), 26 deletions(-)
--
1.9.1
