Make some offending drivers depend on it and set
CONFIG_ARCH_NO_VIRT_TO_BUS for ppc64 so that we don't build those drivers.
Signed-off-by: Stephen Rothwell <[EMAIL PROTECTED]>
---
arch/powerpc/Kconfig | 3 +++
drivers/atm/Kconfig | 8 ++++----
drivers/block/Kconfig | 2 +-
drivers/message/i2o/Kconfig | 2 +-
drivers/net/wan/Kconfig | 2 +-
drivers/scsi/Kconfig | 2 +-
mm/Kconfig | 4 ++++
sound/oss/Kconfig | 6 +++---
8 files changed, 18 insertions(+), 11 deletions(-)
This gets PowerPC allmodconfig and allyesconfig much closer to building.
--
Cheers,
Stephen Rothwell [EMAIL PROTECTED]
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 56d3c0d..6d6c5ca 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -66,6 +66,9 @@ config GENERIC_FIND_NEXT_BIT
bool
default y
+config ARCH_NO_VIRT_TO_BUS
+ def_bool PPC64
+
config PPC
bool
default y
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index f5a47a4..11c2741 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -142,7 +142,7 @@ config ATM_ENI_BURST_RX_2W
config ATM_FIRESTREAM
tristate "Fujitsu FireStream (FS50/FS155) "
- depends on PCI
+ depends on PCI && VIRT_TO_BUS
help
Driver for the Fujitsu FireStream 155 (MB86697) and
FireStream 50 (MB86695) ATM PCI chips.
@@ -152,7 +152,7 @@ config ATM_FIRESTREAM
config ATM_ZATM
tristate "ZeitNet ZN1221/ZN1225"
- depends on PCI
+ depends on PCI && VIRT_TO_BUS
help
Driver for the ZeitNet ZN1221 (MMF) and ZN1225 (UTP-5) 155 Mbps ATM
adapters.
@@ -240,7 +240,7 @@ config ATM_IDT77252_USE_SUNI
config ATM_AMBASSADOR
tristate "Madge Ambassador (Collage PCI 155 Server)"
- depends on PCI
+ depends on PCI && VIRT_TO_BUS
select BITREVERSE
help
This is a driver for ATMizer based ATM card produced by Madge
@@ -265,7 +265,7 @@ config ATM_AMBASSADOR_DEBUG
config ATM_HORIZON
tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155
Client)"
- depends on PCI
+ depends on PCI && VIRT_TO_BUS
help
This is a driver for the Horizon chipset ATM adapter cards once
produced by Madge Networks Ltd. Say Y (or M to compile as a module
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index b4c8319..0c16f84 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -141,7 +141,7 @@ source "drivers/block/paride/Kconfig"
config BLK_CPQ_DA
tristate "Compaq SMART2 support"
- depends on PCI
+ depends on PCI && VIRT_TO_BUS
help
This is the driver for Compaq Smart Array controllers. Everyone
using these boards should say Y here. See the file
diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig
index f4ac21e..01379ae 100644
--- a/drivers/message/i2o/Kconfig
+++ b/drivers/message/i2o/Kconfig
@@ -57,7 +57,7 @@ config I2O_EXT_ADAPTEC_DMA64
config I2O_CONFIG
tristate "I2O Configuration support"
- depends on I2O
+ depends on I2O && VIRT_TO_BUS
---help---
Say Y for support of the configuration interface for the I2O adapters.
If you have a RAID controller from Adaptec and you want to use the
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 4fc8681..a3df09e 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -61,7 +61,7 @@ config COSA
#
config LANMEDIA
tristate "LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards"
- depends on PCI
+ depends on PCI && VIRT_TO_BUS
---help---
Driver for the following Lan Media family of serial boards:
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index d28c14e..2c2b7ac 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -539,7 +539,7 @@ config SCSI_HPTIOP
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
+ depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
diff --git a/mm/Kconfig b/mm/Kconfig
index 8ac412b..40559cf 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -168,3 +168,7 @@ config NR_QUICK
depends on QUICKLIST
default "2" if (SUPERH && !SUPERH64)
default "1"
+
+config VIRT_TO_BUS
+ def_bool y
+ depends on !ARCH_NO_VIRT_TO_BUS
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 4b30ae6..be5801f 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -348,7 +348,7 @@ config MSND_FIFOSIZE
config SOUND_VIA82CXXX
tristate "VIA 82C686 Audio Codec"
- depends on SOUND_PRIME && PCI && OSS_OBSOLETE
+ depends on SOUND_PRIME && PCI && OSS_OBSOLETE && VIRT_TO_BUS
help
Say Y here to include support for the audio codec found on VIA
82Cxxx-based chips. Typically these are built into a motherboard.
@@ -368,7 +368,7 @@ config MIDI_VIA82CXXX
config SOUND_OSS
tristate "OSS sound modules"
- depends on SOUND_PRIME && ISA_DMA_API
+ depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS
help
OSS is the Open Sound System suite of sound card drivers. They make
sound programming easier since they provide a common API. Say Y or
@@ -416,7 +416,7 @@ config SOUND_CS4232
config SOUND_SSCAPE
tristate "Ensoniq SoundScape support"
- depends on SOUND_OSS
+ depends on SOUND_OSS && VIRT_TO_BUS
help
Answer Y if you have a sound card based on the Ensoniq SoundScape
chipset. Such cards are being manufactured at least by Ensoniq, Spea
--
1.5.1.4
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
