Add i.MX7 temperature monitor support.

Signed-off-by: Anson Huang <anson.hu...@nxp.com>
Acked-by: Dong Aisheng <aisheng.d...@nxp.com>
---
no changes since V1.
 .../devicetree/bindings/thermal/imx-thermal.txt      |  5 +++--
 arch/arm/boot/dts/imx7s.dtsi                         | 20 ++++++++++++++++++++
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt 
b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
index 28be51a..9575d45 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -1,8 +1,9 @@
 * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
 
 Required properties:
-- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for 
i.MX6SX.
-  i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is 
IRQ_PANIC,
+- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for 
i.MX6SX,
+  "fsl,imx7-tempmon" for i.MX7S/D.
+  i.MX6SX and i.MX7S/D have two more IRQs than i.MX6Q, one is IRQ_LOW and the 
other is IRQ_PANIC,
   when temperature is below than low threshold, IRQ_LOW will be triggered, 
when temperature
   is higher than panic threshold, system will auto reboot by SRC module.
 - fsl,tempmon : phandle pointer to system controller that contains TEMPMON
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 82ad26e..2e2eda53 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -497,9 +497,29 @@
                        };
 
                        ocotp: ocotp-ctrl@30350000 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                compatible = "fsl,imx7d-ocotp", "syscon";
                                reg = <0x30350000 0x10000>;
                                clocks = <&clks IMX7D_OCOTP_CLK>;
+
+                               tempmon_calib: calib@3c {
+                                       reg = <0x3c 0x4>;
+                               };
+
+                               tempmon_temp_grade: temp-grade@10 {
+                                       reg = <0x10 0x4>;
+                               };
+                       };
+
+                       tempmon: tempmon {
+                               compatible = "fsl,imx7-tempmon";
+                               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+                               fsl,tempmon =<&anatop>;
+                               nvmem-cells = <&tempmon_calib>,
+                                       <&tempmon_temp_grade>;
+                               nvmem-cell-names = "calib", "temp_grade";
+                               clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
                        };
 
                        anatop: anatop@30360000 {
-- 
2.7.4

Reply via email to