Hi Marco,
On Wed, Jan 24, 2018 at 10:21 AM, Marco Franchi <marco...@gmail.com> wrote:
> In preparation for removing 'reg = <0 0>;' from the dtsi SoC files, pass
> 'reg = <0 0 >;' to the dts/dtsi board files that do not pass the memory
> size.
>
> Signed-off-by: Marco Franchi <marco.fran...@nxp.com>
> ---
> Change since v1:
> -none
> arch/arm/boot/dts/imx51-zii-rdu1.dts | 5 +++++
> arch/arm/boot/dts/imx53-tx53.dtsi | 5 +++++
> arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 5 +++++
> arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts | 5 +++++
> arch/arm/boot/dts/imx6dl-ts4900.dts | 5 +++++
> arch/arm/boot/dts/imx6dl-ts7970.dts | 5 +++++
> arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts | 5 +++++
> arch/arm/boot/dts/imx6q-h100.dts | 5 +++++
> arch/arm/boot/dts/imx6q-novena.dts | 5 +++++
> arch/arm/boot/dts/imx6q-ts4900.dts | 5 +++++
> arch/arm/boot/dts/imx6q-ts7970.dts | 5 +++++
> arch/arm/boot/dts/imx6q-zii-rdu2.dts | 5 +++++
> arch/arm/boot/dts/imx6qdl-apalis.dtsi | 5 +++++
> arch/arm/boot/dts/imx6qdl-cubox-i.dtsi | 5 +++++
> arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 5 +++++
> arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 5 +++++
> arch/arm/boot/dts/imx6qp-zii-rdu2.dts | 5 +++++
> 17 files changed, 85 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> index 5306b78..f20fdd9 100644
> --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
> +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
> @@ -51,6 +51,11 @@
> stdout-path = &uart1;
> };
>
> + /* Will be filled by the bootloader */
> + memory@0 {
You need to remove @0 here as 0 is not the real address.
This will still cause warnings, but then each board maintainer can
decide if they want to put the real memory address for the board dts.
Thanks
