On 22/01/18 13:00, Lars-Peter Clausen wrote:
> On 01/22/2018 01:50 PM, Kieran Bingham wrote:
>> The ADV7511 has four 256-byte maps that can be accessed via the main I²C
>> ports. Each map has it own I²C address and acts as a standard slave
>> device on the I²C bus.
>>
>> Allow a device tree node to override the default addresses so that
>> address conflicts with other devices on the same bus may be resolved at
>> the board description level.
>>
>> Signed-off-by: Kieran Bingham <kieran.bing...@ideasonboard.com>
> 
> I've been working on the same thing, but you've beat me to it! Patch looks
> mostly OK, but I think you are missing this piece:
> 
> https://github.com/analogdevicesinc/linux/commit/ba9b57507cb78724a606eb24104e22fea942437d#diff-2cf1828c644e351adefabe9509410400L553

Ah yes - Thanks, - you're correct - I had missed that bit.

Added locally for a v2.
--
Kieran

>> ---
>>  .../bindings/display/bridge/adi,adv7511.txt        | 10 +++++-
>>  drivers/gpu/drm/bridge/adv7511/adv7511.h           |  4 +++
>>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c       | 36 
>> ++++++++++++++--------
>>  3 files changed, 37 insertions(+), 13 deletions(-)
>>
>> diff --git 
>> a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt 
>> b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>> index 0047b1394c70..f6bb9f6d3f48 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>> +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
>> @@ -70,6 +70,9 @@ Optional properties:
>>    rather than generate its own timings for HDMI output.
>>  - clocks: from common clock binding: reference to the CEC clock.
>>  - clock-names: from common clock binding: must be "cec".
>> +- reg-names : Names of maps with programmable addresses.
>> +    It can contain any map needing a non-default address.
>> +    Possible maps names are : "main", "edid", "cec", "packet"
>>  
>>  Required nodes:
>>  
>> @@ -88,7 +91,12 @@ Example
>>  
>>      adv7511w: hdmi@39 {
>>              compatible = "adi,adv7511w";
>> -            reg = <39>;
>> +            /*
>> +             * The EDID page will be accessible on address 0x66 on the i2c
>> +             * bus. All other maps continue to use their default addresses.
>> +             */
>> +            reg = <0x39 0x66>;
>> +            reg-names = "main", "edid";
>>              interrupt-parent = <&gpio3>;
>>              interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
>>              clocks = <&cec_clock>;
>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h 
>> b/drivers/gpu/drm/bridge/adv7511/adv7511.h
>> index d034b2cb5eee..7d81ce3808e0 100644
>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
>> @@ -53,8 +53,10 @@
>>  #define ADV7511_REG_POWER                   0x41
>>  #define ADV7511_REG_STATUS                  0x42
>>  #define ADV7511_REG_EDID_I2C_ADDR           0x43
>> +#define ADV7511_REG_EDID_I2C_ADDR_DEFAULT   0x3f
>>  #define ADV7511_REG_PACKET_ENABLE1          0x44
>>  #define ADV7511_REG_PACKET_I2C_ADDR         0x45
>> +#define ADV7511_REG_PACKET_I2C_ADDR_DEFAULT 0x38
>>  #define ADV7511_REG_DSD_ENABLE                      0x46
>>  #define ADV7511_REG_VIDEO_INPUT_CFG2                0x48
>>  #define ADV7511_REG_INFOFRAME_UPDATE                0x4a
>> @@ -89,6 +91,7 @@
>>  #define ADV7511_REG_TMDS_CLOCK_INV          0xde
>>  #define ADV7511_REG_ARC_CTRL                        0xdf
>>  #define ADV7511_REG_CEC_I2C_ADDR            0xe1
>> +#define ADV7511_REG_CEC_I2C_ADDR_DEFAULT    0x3c
>>  #define ADV7511_REG_CEC_CTRL                        0xe2
>>  #define ADV7511_REG_CHIP_ID_HIGH            0xf5
>>  #define ADV7511_REG_CHIP_ID_LOW                     0xf6
>> @@ -322,6 +325,7 @@ struct adv7511 {
>>      struct i2c_client *i2c_main;
>>      struct i2c_client *i2c_edid;
>>      struct i2c_client *i2c_cec;
>> +    struct i2c_client *i2c_packet;
>>  
>>      struct regmap *regmap;
>>      struct regmap *regmap_cec;
>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c 
>> b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>> index efa29db5fc2b..7ec33837752b 100644
>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>> @@ -969,8 +969,8 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
>>  {
>>      int ret;
>>  
>> -    adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter,
>> -                                 adv->i2c_main->addr - 1);
>> +    adv->i2c_cec = i2c_new_secondary_device(adv->i2c_main, "cec",
>> +                                    ADV7511_REG_CEC_I2C_ADDR_DEFAULT);
>>      if (!adv->i2c_cec)
>>              return -ENOMEM;
>>      i2c_set_clientdata(adv->i2c_cec, adv);
>> @@ -1082,8 +1082,6 @@ static int adv7511_probe(struct i2c_client *i2c, const 
>> struct i2c_device_id *id)
>>      struct adv7511_link_config link_config;
>>      struct adv7511 *adv7511;
>>      struct device *dev = &i2c->dev;
>> -    unsigned int main_i2c_addr = i2c->addr << 1;
>> -    unsigned int edid_i2c_addr = main_i2c_addr + 4;
>>      unsigned int val;
>>      int ret;
>>  
>> @@ -1153,24 +1151,35 @@ static int adv7511_probe(struct i2c_client *i2c, 
>> const struct i2c_device_id *id)
>>      if (ret)
>>              goto uninit_regulators;
>>  
>> -    regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
>> -    regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>> -                 main_i2c_addr - 0xa);
>> -    regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
>> -                 main_i2c_addr - 2);
>> -
>>      adv7511_packet_disable(adv7511, 0xffff);
>>  
>> -    adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
>> +    adv7511->i2c_edid = i2c_new_secondary_device(i2c, "edid",
>> +                                    ADV7511_REG_EDID_I2C_ADDR_DEFAULT);
>>      if (!adv7511->i2c_edid) {
>>              ret = -ENOMEM;
>>              goto uninit_regulators;
>>      }
>>  
>> +    regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
>> +                 adv7511->i2c_edid->addr << 1);
>> +
>>      ret = adv7511_init_cec_regmap(adv7511);
>>      if (ret)
>>              goto err_i2c_unregister_edid;
>>  
>> +    regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
>> +                 adv7511->i2c_cec->addr << 1);
>> +
>> +    adv7511->i2c_packet = i2c_new_secondary_device(i2c, "packet",
>> +                                    ADV7511_REG_PACKET_I2C_ADDR_DEFAULT);
>> +    if (!adv7511->i2c_packet) {
>> +            ret = -ENOMEM;
>> +            goto err_unregister_cec;
>> +    }
>> +
>> +    regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
>> +                 adv7511->i2c_packet->addr << 1);
>> +
>>      INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
>>  
>>      if (i2c->irq) {
>> @@ -1181,7 +1190,7 @@ static int adv7511_probe(struct i2c_client *i2c, const 
>> struct i2c_device_id *id)
>>                                              IRQF_ONESHOT, dev_name(dev),
>>                                              adv7511);
>>              if (ret)
>> -                    goto err_unregister_cec;
>> +                    goto err_unregister_packet;
>>      }
>>  
>>      adv7511_power_off(adv7511);
>> @@ -1203,6 +1212,8 @@ static int adv7511_probe(struct i2c_client *i2c, const 
>> struct i2c_device_id *id)
>>      adv7511_audio_init(dev, adv7511);
>>      return 0;
>>  
>> +err_unregister_packet:
>> +    i2c_unregister_device(adv7511->i2c_packet);
>>  err_unregister_cec:
>>      i2c_unregister_device(adv7511->i2c_cec);
>>      if (adv7511->cec_clk)
>> @@ -1234,6 +1245,7 @@ static int adv7511_remove(struct i2c_client *i2c)
>>      cec_unregister_adapter(adv7511->cec_adap);
>>  
>>      i2c_unregister_device(adv7511->i2c_edid);
>> +    i2c_unregister_device(adv7511->i2c_packet);
>>  
>>      return 0;
>>  }
>>
> 

Reply via email to