[PATCH v2 2/3] ARM: dts: at91: nattis: add lvds-encoder

[Peter Rosin]

The lvds encoder chip was omitted by oversight. Add it.

Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis 
with Natte power")
Signed-off-by: Peter Rosin <p...@axentia.se>
---
 arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 31 ++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts 
b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
index 03683c1b4240..7cedd3ddf0bd 100644
--- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -109,7 +109,32 @@
 
                port {
                        panel_input: endpoint {
-                               remote-endpoint = <&hlcdc_panel_output>;
+                               remote-endpoint = <&lvds_encoder_output>;
+                       };
+               };
+       };
+
+       lvds-encoder {
+               compatible = "lvds-encoder";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
+                               lvds_encoder_input: endpoint {
+                                       remote-endpoint = <&hlcdc_output>;
+                               };
+                       };
+
+                       port@1 {
+                               reg = <1>;
+
+                               lvds_encoder_output: endpoint {
+                                       remote-endpoint = <&panel_input>;
+                               };
                        };
                };
        };
@@ -176,8 +201,8 @@
                             &pinctrl_lcd_hipow0>;
 
                port@0 {
-                       hlcdc_panel_output: endpoint {
-                               remote-endpoint = <&panel_input>;
+                       hlcdc_output: endpoint {
+                               remote-endpoint = <&lvds_encoder_input>;
                        };
                };
        };
-- 
2.11.0