Currently, the ctrl->state will be changed to NVME_CTRL_RESETTING
before queue the reset work. This is not so strict. There could be
a big gap before the reset_work callback is invoked. In addition,
there is some disable work in the reset_work callback, strictly
speaking, not part of reset work, and could lead to some confusion.
In addition, after set state to RESETTING and disable procedure,
nvme-rdma/fc use NVME_CTRL_RECONNECTING to mark the setup and
reconnect procedure. The RESETTING state has been narrowed.
This patch add NVME_CTRL_RESET_PREPARE state to mark the reset_work
or error recovery work, scheduling gap and disable procedure.
After that,
- For nvme-pci, nvmet-loop, set state to RESETTING, start
initialization.
- For nvme-rdma, nvme-fc, set state to RECONNECTING, start
initialization or reconnect.
Suggested-by: Christoph Hellwig <h...@lst.de>
Signed-off-by: Jianchao Wang <jianchao.w.w...@oracle.com>
---
drivers/nvme/host/core.c | 18 +++++++++++++++---
drivers/nvme/host/fc.c | 4 ++--
drivers/nvme/host/nvme.h | 8 ++++++++
drivers/nvme/host/pci.c | 25 +++++++++++++++++++++----
drivers/nvme/host/rdma.c | 2 +-
drivers/nvme/target/loop.c | 5 +++++
6 files changed, 52 insertions(+), 10 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 230cc09..87d209f 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -87,7 +87,7 @@ static __le32 nvme_get_log_dw10(u8 lid, size_t size)
int nvme_reset_ctrl(struct nvme_ctrl *ctrl)
{
- if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESETTING))
+ if (!nvme_change_ctrl_state(ctrl, NVME_CTRL_RESET_PREPARE))
return -EBUSY;
if (!queue_work(nvme_wq, &ctrl->reset_work))
return -EBUSY;
@@ -260,7 +260,7 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
break;
}
break;
- case NVME_CTRL_RESETTING:
+ case NVME_CTRL_RESET_PREPARE:
switch (old_state) {
case NVME_CTRL_NEW:
case NVME_CTRL_LIVE:
@@ -271,10 +271,20 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
break;
}
break;
+
+ case NVME_CTRL_RESETTING:
+ switch (old_state) {
+ case NVME_CTRL_RESET_PREPARE:
+ changed = true;
+ /* FALLTHRU */
+ default:
+ break;
+ }
+ break;
case NVME_CTRL_RECONNECTING:
switch (old_state) {
case NVME_CTRL_LIVE:
- case NVME_CTRL_RESETTING:
+ case NVME_CTRL_RESET_PREPARE:
changed = true;
/* FALLTHRU */
default:
@@ -286,6 +296,7 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,
case NVME_CTRL_LIVE:
case NVME_CTRL_ADMIN_ONLY:
case NVME_CTRL_RESETTING:
+ case NVME_CTRL_RESET_PREPARE:
case NVME_CTRL_RECONNECTING:
changed = true;
/* FALLTHRU */
@@ -2660,6 +2671,7 @@ static ssize_t nvme_sysfs_show_state(struct device *dev,
[NVME_CTRL_LIVE] = "live",
[NVME_CTRL_ADMIN_ONLY] = "only-admin",
[NVME_CTRL_RESETTING] = "resetting",
+ [NVME_CTRL_RESET_PREPARE] = "reset-prepare",
[NVME_CTRL_RECONNECTING]= "reconnecting",
[NVME_CTRL_DELETING] = "deleting",
[NVME_CTRL_DEAD] = "dead",
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 306aee4..1ba0669 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -546,7 +546,7 @@ nvme_fc_resume_controller(struct nvme_fc_ctrl *ctrl)
queue_delayed_work(nvme_wq, &ctrl->connect_work, 0);
break;
- case NVME_CTRL_RESETTING:
+ case NVME_CTRL_RESET_PREPARE:
/*
* Controller is already in the process of terminating the
* association. No need to do anything further. The reconnect
@@ -789,7 +789,7 @@ nvme_fc_ctrl_connectivity_loss(struct nvme_fc_ctrl *ctrl)
*/
break;
- case NVME_CTRL_RESETTING:
+ case NVME_CTRL_RESET_PREPARE:
/*
* Controller is already in the process of terminating the
* association. No need to do anything further. The reconnect
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index a44eeca..e4cae21 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -116,10 +116,18 @@ static inline struct nvme_request *nvme_req(struct
request *req)
*/
#define NVME_QUIRK_DELAY_AMOUNT 2300
+/*
+ * RESET_PREPARE - mark the state of scheduling gap and disable procedure
+ * RESETTING - nvme-pci, nvmet loop use it to mark the state of setup
+ * procedure
+ * RECONNECTING - nvme-fc, nvme-rdma use it to mark the state of setup
+ * and reconnect procedure
+ */
enum nvme_ctrl_state {
NVME_CTRL_NEW,
NVME_CTRL_LIVE,
NVME_CTRL_ADMIN_ONLY, /* Only admin queue live */
+ NVME_CTRL_RESET_PREPARE,
NVME_CTRL_RESETTING,
NVME_CTRL_RECONNECTING,
NVME_CTRL_DELETING,
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 45f843d..f4b47b9 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1139,8 +1139,13 @@ static bool nvme_should_reset(struct nvme_dev *dev, u32
csts)
bool nssro = dev->subsystem && (csts & NVME_CSTS_NSSRO);
/* If there is a reset ongoing, we shouldn't reset again. */
- if (dev->ctrl.state == NVME_CTRL_RESETTING)
+ switch (dev->ctrl.state) {
+ case NVME_CTRL_RESETTING:
+ case NVME_CTRL_RESET_PREPARE:
return false;
+ default:
+ break;
+ }
/* We shouldn't reset unless the controller is on fatal error state
* _or_ if we lost the communication with it.
@@ -2181,9 +2186,16 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool
shutdown)
if (pci_is_enabled(pdev)) {
u32 csts = readl(dev->bar + NVME_REG_CSTS);
- if (dev->ctrl.state == NVME_CTRL_LIVE ||
- dev->ctrl.state == NVME_CTRL_RESETTING)
+ switch (dev->ctrl.state) {
+ case NVME_CTRL_LIVE:
+ case NVME_CTRL_RESETTING:
+ case NVME_CTRL_RESET_PREPARE:
nvme_start_freeze(&dev->ctrl);
+ break;
+ default:
+ break;
+ }
+
dead = !!((csts & NVME_CSTS_CFS) || !(csts & NVME_CSTS_RDY) ||
pdev->error_state != pci_channel_io_normal);
}
@@ -2294,7 +2306,7 @@ static void nvme_reset_work(struct work_struct *work)
int result = -ENODEV;
enum nvme_ctrl_state new_state = NVME_CTRL_LIVE;
- if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESETTING))
+ if (WARN_ON(dev->ctrl.state != NVME_CTRL_RESET_PREPARE))
goto out;
/*
@@ -2304,6 +2316,11 @@ static void nvme_reset_work(struct work_struct *work)
if (dev->ctrl.ctrl_config & NVME_CC_ENABLE)
nvme_dev_disable(dev, false);
+ if (!nvme_change_ctrl_state(&dev->ctrl, NVME_CTRL_RESETTING)) {
+ WARN_ON_ONCE(dev->ctrl.state != NVME_CTRL_DELETING);
+ goto out;
+ }
+
result = nvme_pci_enable(dev);
if (result)
goto out;
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index d49b1e7..6b5f2f4 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -985,7 +985,7 @@ static void nvme_rdma_error_recovery_work(struct
work_struct *work)
static void nvme_rdma_error_recovery(struct nvme_rdma_ctrl *ctrl)
{
- if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RESETTING))
+ if (!nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RESET_PREPARE))
return;
queue_work(nvme_wq, &ctrl->err_work);
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index fdfcc96..cbc9249 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -481,6 +481,11 @@ static void nvme_loop_reset_ctrl_work(struct work_struct
*work)
nvme_stop_ctrl(&ctrl->ctrl);
nvme_loop_shutdown_ctrl(ctrl);
+ changed = nvme_change_ctrl_state(&ctrl->ctrl, NVME_CTRL_RESETTING);
+ if (!changed) {
+ WARN_ON_ONCE(ctrl->ctrl.state != NVME_CTRL_DELETING);
+ return;
+ }
ret = nvme_loop_configure_admin_queue(ctrl);
if (ret)
goto out_disable;
--
2.7.4
