Hello, I have problem with PC card slot in Wyse 3360SE terminal. Card insertion or removal is detected, but nothing more. I tried two different cards. Same behaviour.
Hardware is: > Intel ISA PCIC probe: > Intel i82365sl A step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 1 socket > host opts [0]: none > ISA irqs (default) = 3,4,5,7,9,10,11,12,14,15 polling interval = 1000 ms Dmesg after inserting card: > pccard: PCMCIA card inserted into slot 0 I have similar hardware in other machine: > Intel i82365sl B step ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets > host opts [0]: none > host opts [1]: none > ISA irqs (scanned) = 3,4,7,9,11,12 status change on irq 11 Which is working: > pccard: PCMCIA card inserted into slot 0 > cs: memory probe 0x0d0000-0x0dffff: excluding 0xd0000-0xd1fff > cs: memory probe 0x0e0000-0x0effff: clean. > pcmcia: registering new device pcmcia0.0 I checked 82365 registers. Wyse has 0x82 at offset 0 and 0 at offset 6. In working case it is 0x83 at offset 0 and 1 at offset 6. Next differences at and above 0x10 offset. I tried all "pccardctl" options. No change. Please point me direction in which I should search for solution. I don't know if it is important: after reboot 82365 isn't detected at all on Wyse. Please CC me. Thank You Rafał ---------------------------------------------------------------------- Daj ogloszenie za darmo do nowego serwisu Populada >>>http://link.interia.pl/f1a89 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
