I have the same problem, and yes I have a medium inserted. What can I
do?

    Regards.

    -Jorge

P.D.    Debian 2.2 (+ some updates from woody to complaint 2.4 series of
kernels)
            2.4.0.test11 + reiserfs
            Tyan K7 VIA + CMD649
            Same tape drive and same revision of firmware. (primary in the
second channel of the motherboard)

==============================================================
Jorge Boncompte - Técnico de sistemas
DTI2 - Desarrollo de la Tecnología de las Comunicaciones
--------------------------------------------------------------
C/ Abogado Enriquez Barrios, 5   14004 CORDOBA (SPAIN)
Tlf: +34 957 761395 / FAX: +34 957 450380
--------------------------------------------------------------
[EMAIL PROTECTED] _-_-_-_-_-_-_-_-_-_-_-_-_-_ http://www.dti2.net
==============================================================
Without wicker a basket cannot be done.
==============================================================

----- Mensaje original -----
De: "Kurt Garloff" <[EMAIL PROTECTED]>
Para: "Noel Burton-Krahn" <[EMAIL PROTECTED]>
CC: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Enviado: martes, 17 de octubre de 2000 10:53
Asunto: Re: OnStream DI-30 with ide-tape version 1.16f problems

On Mon, Oct 16, 2000 at 04:51:48PM -0700, Noel Burton-Krahn wrote:
> mt -f /dev/nht0 status
>
>     /dev/nht0: Device or resource busy
>
> tail /var/log/messages
>
>     kernel: ide-tape: hdd <-> ht0: OnStream DI-30 rev 1.08
>     kernel: ide-tape: hdd <-> ht0: 990KBps, 64*32kB buffer, 10208kB
pipeline, 60ms tDSC
>     kernel: ide-tape: ht0: I/O error, pc =  0, key =  2, asc = 3a, ascq =
0

MEDIUM NOT PRESENT.

>     kernel: ide-tape: ht0: drive not ready

Did you insert a medium?

Regards,
--
Kurt Garloff  <[EMAIL PROTECTED]>                          Eindhoven, NL
GPG key: See mail header, key servers         Linux kernel development
SuSE GmbH, Nuernberg, FRG                               SCSI, Security


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/

Reply via email to