Use new binding about USB wakeup which now supports multi USB
wakeup glue layer between SSUSB and SPM.
Meanwhile remove dummy clocks of USB wakeup.
Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +-
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +++---------
2 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 1c3634f..0acba1f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -505,7 +505,7 @@
vbus-supply = <&usb_p0_vbus>;
extcon = <&extcon_usb>;
dr_mode = "otg";
- mediatek,enable-wakeup;
+ wakeup-source;
pinctrl-names = "default", "id_float", "id_ground";
pinctrl-0 = <&usb_id_pins_float>;
pinctrl-1 = <&usb_id_pins_float>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 26396ef..9263d9f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -731,15 +731,9 @@
<&u3port0 PHY_TYPE_USB3>,
<&u2port1 PHY_TYPE_USB2>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
- clocks = <&topckgen CLK_TOP_USB30_SEL>,
- <&clk26m>,
- <&pericfg CLK_PERI_USB0>,
- <&pericfg CLK_PERI_USB1>;
- clock-names = "sys_ck",
- "ref_ck",
- "wakeup_deb_p0",
- "wakeup_deb_p1";
- mediatek,syscon-wakeup = <&pericfg>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
+ clock-names = "sys_ck", "ref_ck";
+ mediatek,syscon-wakeup = <&pericfg 0x400 1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
--
1.9.1
