Hello,
I tried the ide-tape driver for several weeks now. And after some time during
writing or reading tar stops because of errors.
Error messages are:
Nov 30 15:32:20 kernel: ide-tape: ht0: I/O error, pc = 8, key = 0,
asc = 0, ascq = 2 Nov 30 15:32:25 eckhard last message repeated 1000 times
Nov 30 15:32:25 kernel: ide-tape: ht0: unrecovered read error on logical block number
461706, skipping
Nov 30 15:32:25 kernel: ide-tape: ht0: I/O error, pc = 8, key = 0, asc = 0, ascq =
2
Nov 30 15:32:31 last message repeated 1000 times
Nov 30 15:32:31 kernel: ide-tape: ht0: unrecovered read error on logical block number
461707, skipping
Nov 30 15:32:31 kernel: ide-tape: ht0: I/O error, pc = 8, key = 0, asc = 0, ascq =
2
I tried to switch of pipelining by setting the parameters in ide-tape.c to 0
but it didn't help too much ( the error seems to raise later :-(
This happens with 2.2.14, 2.2.17 and 2.4.test11 on SuSE-Linux6.4.
I would really like to help finding the reason for this despite it takes a lot
of time to fill a complete tape with tar.
Please - what's going on there?
Eckhard Jokisch
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
