Switch the uart_ao pclk to CLK81 since the clock driver is ready. Signed-off-by: Yixun Lan <yixun....@amlogic.com>
--- This is a fixup for the previous version Changes in v8 since [1] - move clock DT info into soc.dtsi [1] http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005741.html --- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 01beb211f442..d1f8043be426 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/axg-clkc.h> / { compatible = "amlogic,meson-axg"; @@ -200,7 +201,7 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -209,7 +210,7 @@ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; -- 2.15.1
