Selon Andrew Morton <[EMAIL PROTECTED]>: > On Thu, 10 May 2007 15:05:25 +0200 > Remi Colinet <[EMAIL PROTECTED]> wrote: > > > My D610 ALPS Glide Point is unresponsive with 2.6.21-mm1 patch. > > No problem noticed with 2.6.21. > > > > The culprit seems to be git-input. I have applied 2.6.21-mm1 on top of > 2.6.21 > > and then removed git-input patch. It is ok since then. > > > > >From what i can see, no interrupt is raised from the GlidePoint with > git-input > > applied. IRQ count 12 does not increase. It is when using the touchpad. > > > > CPU0 > > 0: 160 IO-APIC-edge timer > > 1: 935 IO-APIC-edge i8042 > > 7: 0 IO-APIC-edge parport0 > > 8: 1 IO-APIC-edge rtc > > 9: 2 IO-APIC-fasteoi acpi > > => 12: 114 IO-APIC-edge i8042 <= > > 14: 3223 IO-APIC-edge libata > > 15: 5 IO-APIC-edge libata > > 16: 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5, Intel > ICH6 > > 17: 1 IO-APIC-fasteoi uhci_hcd:usb2, ipw2200, Intel ICH6 > Modem > > 18: 0 IO-APIC-fasteoi uhci_hcd:usb3 > > 19: 1 IO-APIC-fasteoi uhci_hcd:usb4, yenta > > NMI: 0 > > LOC: 4051 > > ERR: 0 > > MIS: 0 > > > > I have also tried to disable the ALPS driver in the .config file. IRQ 12 > are > > then raised when using the Glide Point. X refuses to start. > > > > Are you able to test 2.6.21-mm2? > >
I have tried with the lastest mm broken-out snapshot, i.e 2.6.21-mm3. The GlidePoint is still unresponsive. 2.6.21-git13 works fine with the GlidePoint. So I'am bisecting 2.6.21-mm3. It works just with the origin.patch applied. Thanks, Remi Colinet - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
