Commit 8275b77a1513 ("mfd: rts5249: Add support for RTS5250S power
saving") adds powersaving support for device-ids 5249 524a and 525a.But as a side effect it breaks ASPM support for all the other device-ids, causing e.g. the Haswell CPU on a Lenovo T440s to not go into a higher c-state then PC3, while previously it would go to PC7, causing the machine to idle at 7.4W instead of 6.6W! The problem here is the new option.dev_aspm_mode field, which only gets explicitly initialized in the new code for the device-ids 5249 524a and 525a. Leaving the dev_aspm_mode 0 for the other device-ids. The default dev_aspm_mode 0 is mapped to DEV_ASPM_DISABLE, but the old behavior of calling rtsx_pci_enable_aspm() when idle and rtsx_pci_disable_aspm() when busy happens when dev_aspm_mode == DEV_ASPM_DYNAMIC. This commit changes the enum so that 0 = DEV_ASPM_DYNAMIC matching the old default behavior, fixing the pm regression with the other device-ids. Cc: Rui Feng <[email protected]> Signed-off-by: Hans de Goede <[email protected]> --- include/linux/mfd/rtsx_pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h index a2a1318a3d0c..c3d3f04d8cc6 100644 --- a/include/linux/mfd/rtsx_pci.h +++ b/include/linux/mfd/rtsx_pci.h @@ -915,10 +915,10 @@ enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; #define LTR_L1SS_PWR_GATE_CHECK_CARD_EN BIT(6) enum dev_aspm_mode { - DEV_ASPM_DISABLE = 0, DEV_ASPM_DYNAMIC, DEV_ASPM_BACKDOOR, DEV_ASPM_STATIC, + DEV_ASPM_DISABLE, }; /* -- 2.14.3
