Update the lp8860 dt binding to the LED standard where the LED should have a child node and also adding a LED trigger entry.
Signed-off-by: Dan Murphy <[email protected]> --- v6 - New patch to fix binding documentation Documentation/devicetree/bindings/leds/leds-lp8860.txt | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt index aad38dd94d4b..4cf396de6eba 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -12,17 +12,24 @@ Required properties: - label - Used for naming LEDs Optional properties: - - enable-gpio - gpio pin to enable/disable the device. - - supply - "vled" - LED supply + - enable-gpios : gpio pin to enable/disable the device. + - vled-supply : LED supply + - label : see Documentation/devicetree/bindings/leds/common.txt + - linux,default-trigger : (optional) + see Documentation/devicetree/bindings/leds/common.txt Example: -leds: leds@6 { +lp8860@2d { compatible = "ti,lp8860"; reg = <0x2d>; - label = "display_cluster"; enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; + + backlight: backlight@0 { + label = "backlight_cluster"; + linux,default-trigger = "backlight"; + }; } For more product information please see the link below: -- 2.15.0.124.g7668cbc60
