Hi Guenter,
Thanks again for you review.
I am very glad that this patch has been accepted.
Best Regards,
Eric Long
On Mon, Nov 27, 2017 at 08:09:18PM -0800, Guenter Roeck wrote:
> On 11/27/2017 06:18 PM, Eric Long wrote:
> >This patch adds the documentation for Spreadtrum watchdog driver.
> >
> >Signed-off-by: Eric Long <eric.l...@spreadtrum.com>
> >Acked-by: Rob Herring <r...@kernel.org>
>
> The patch series is in my tree, and will ultimately find its way into Wim's
> tree.
> No need to resend it anymore.
>
> In general, if a patch is available in
> git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
> watchdog-next
> there is no need to resend it.
>
> Thanks,
> Guenter
>
> >---
> >Changes since v6:
> >- No updates.
> >
> >Changes since v5:
> >- No updates.
> >
> >Changes since v4:
> >- No updates.
> >
> >Changes since v3:
> >- No updates.
> >
> >Changes since v2:
> >- Add acked tag from Rob.
> >
> >Changes since v1:
> >- No updates.
> >---
> > .../devicetree/bindings/watchdog/sprd-wdt.txt | 19
> > +++++++++++++++++++
> > 1 file changed, 19 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> >
> >diff --git a/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> >b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> >new file mode 100644
> >index 0000000..aeaf3e0
> >--- /dev/null
> >+++ b/Documentation/devicetree/bindings/watchdog/sprd-wdt.txt
> >@@ -0,0 +1,19 @@
> >+Spreadtrum SoCs Watchdog timer
> >+
> >+Required properties:
> >+- compatible : Should be "sprd,sp9860-wdt".
> >+- reg : Specifies base physical address and size of the registers.
> >+- interrupts : Exactly one interrupt specifier.
> >+- timeout-sec : Contain the default watchdog timeout in seconds.
> >+- clock-names : Contain the input clock names.
> >+- clocks : Phandles to input clocks.
> >+
> >+Example:
> >+ watchdog: watchdog@40310000 {
> >+ compatible = "sprd,sp9860-wdt";
> >+ reg = <0 0x40310000 0 0x1000>;
> >+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> >+ timeout-sec = <12>;
> >+ clock-names = "enable", "rtc_enable";
> >+ clocks = <&clk_aon_apb_gates1 8>, <&clk_aon_apb_rtc_gates 9>;
> >+ };
> >
>
