Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify which options distro configurations
should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)
There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.
Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torva...@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.boss...@linux.intel.com>
---
sound/soc/intel/Kconfig | 57 +++++++++++++++----------
sound/soc/intel/boards/Kconfig | 97 ++++++++++++++++++++++++------------------
2 files changed, 90 insertions(+), 64 deletions(-)
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 7b49d04e3c60..98ef2273665f 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -1,3 +1,18 @@
+config SND_SOC_INTEL_SST_TOPLEVEL
+ bool "Intel ASoC SST drivers"
+ default y
+ depends on X86 || COMPILE_TEST
+ help
+ Intel ASoC SST Platform Drivers. If you have a Intel machine that
+ has audio controller with a DSP and I2S or DMIC port, then
+ enable this option by saying Y
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel SST drivers.
+
+if SND_SOC_INTEL_SST_TOPLEVEL
+
config SND_SST_IPC
tristate
@@ -11,9 +26,6 @@ config SND_SST_IPC_ACPI
select SND_SOC_INTEL_SST
select IOSF_MBI
-config SND_SOC_INTEL_COMMON
- tristate
-
config SND_SOC_INTEL_SST
tristate
select SND_SOC_INTEL_SST_ACPI if ACPI
@@ -25,47 +37,48 @@ config SND_SOC_INTEL_SST_FIRMWARE
config SND_SOC_INTEL_SST_ACPI
tristate
-config SND_SOC_ACPI_INTEL_MATCH
- tristate
- select SND_SOC_ACPI if ACPI
-
-config SND_SOC_INTEL_SST_TOPLEVEL
- tristate "Intel ASoC SST drivers"
- depends on X86 || COMPILE_TEST
- select SND_SOC_INTEL_MACH
- select SND_SOC_INTEL_COMMON
- help
- Intel ASoC Audio Drivers. If you have a Intel machine that
- has audio controller with a DSP and I2S or DMIC port, then
- enable this option by saying Y or M
- If unsure select "N".
-
config SND_SOC_INTEL_HASWELL
tristate "Intel ASoC SST driver for Haswell/Broadwell"
- depends on SND_SOC_INTEL_SST_TOPLEVEL && SND_DMA_SGBUF
+ depends on SND_DMA_SGBUF
depends on DMADEVICES
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_FIRMWARE
+ select SND_SOC_INTEL_COMMON
config SND_SOC_INTEL_BAYTRAIL
tristate "Intel ASoC SST driver for Baytrail (legacy)"
- depends on SND_SOC_INTEL_SST_TOPLEVEL
depends on DMADEVICES
select SND_SOC_INTEL_SST
select SND_SOC_INTEL_SST_FIRMWARE
+ select SND_SOC_INTEL_COMMON
config SND_SST_ATOM_HIFI2_PLATFORM
tristate "Intel ASoC SST driver for HiFi2 platforms (*field, *trail)"
- depends on SND_SOC_INTEL_SST_TOPLEVEL && X86
+ depends on X86
select SND_SOC_COMPRESS
+ select SND_SOC_INTEL_COMMON
config SND_SOC_INTEL_SKYLAKE
tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL"
- depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI
+ depends on PCI && ACPI
select SND_HDA_EXT_CORE
select SND_HDA_DSP_LOADER
select SND_SOC_TOPOLOGY
select SND_SOC_INTEL_SST
+ select SND_SOC_INTEL_COMMON
+
+endif ## SND_SOC_INTEL_SST_TOPLEVEL
# ASoC codec drivers
source "sound/soc/intel/boards/Kconfig"
+
+# configs common to SST and SOF to compile sound/soc/intel/common
+# directory and use matching tables
+
+config SND_SOC_INTEL_COMMON
+ tristate
+ select SND_SOC_ACPI_INTEL_MATCH if ACPI
+
+config SND_SOC_ACPI_INTEL_MATCH
+ tristate
+ select SND_SOC_ACPI if ACPI
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 6f754708a48c..4ae44b0cea0a 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -1,7 +1,14 @@
-config SND_SOC_INTEL_MACH
- tristate "Intel Audio machine drivers"
- depends on SND_SOC_INTEL_SST_TOPLEVEL
- select SND_SOC_ACPI_INTEL_MATCH if ACPI
+config SND_SOC_INTEL_MACH
+ bool "Intel ASoC machine drivers"
+ default y
+ help
+ Intel ASoC Audio Machine Drivers. If you have a Intel machine that
+ has audio controller with a DSP and I2S or DMIC port, then
+ enable this option by saying Y
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel SST machine drivers.
if SND_SOC_INTEL_MACH
@@ -17,103 +24,108 @@ config SND_MFLD_MACHINE
Say Y if you have such a device.
If unsure select "N".
+if SND_SOC_INTEL_HASWELL
+
config SND_SOC_INTEL_HASWELL_MACH
tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint"
depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
- depends on SND_SOC_INTEL_HASWELL
select SND_SOC_RT5640
help
This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell
- Ultrabook platforms.
- Say Y if you have such a device.
+ Ultrabook platforms. This is a recommended option.
+ Say Y or m if you have such a device.
If unsure select "N".
config SND_SOC_INTEL_BDW_RT5677_MACH
tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec"
depends on X86_INTEL_LPSS && GPIOLIB && I2C
- depends on SND_SOC_INTEL_HASWELL
select SND_SOC_RT5677
help
This adds support for Intel Broadwell platform based boards with
- the RT5677 audio codec.
+ the RT5677 audio codec. This is a recommended option.
+ Say Y or m if you have such a device.
+ If unsure select "N".
config SND_SOC_INTEL_BROADWELL_MACH
tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint"
depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM
- depends on SND_SOC_INTEL_HASWELL
select SND_SOC_RT286
help
This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell
Ultrabook platforms.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
+endif
+
+if SND_SOC_INTEL_BAYTRAIL
config SND_SOC_INTEL_BYT_MAX98090_MACH
tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec"
+ default n
depends on X86_INTEL_LPSS && I2C
- depends on SND_SST_IPC_ACPI = n
- depends on SND_SOC_INTEL_BAYTRAIL
select SND_SOC_MAX98090
help
This adds audio driver for Intel Baytrail platform based boards
- with the MAX98090 audio codec.
+ with the MAX98090 audio codec. This driver is deprecated, use
+ SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH instead for better
+ functionality.
config SND_SOC_INTEL_BYT_RT5640_MACH
tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec"
+ default n
depends on X86_INTEL_LPSS && I2C
- depends on SND_SST_IPC_ACPI = n
- depends on SND_SOC_INTEL_BAYTRAIL
select SND_SOC_RT5640
help
This adds audio driver for Intel Baytrail platform based boards
with the RT5640 audio codec. This driver is deprecated, use
SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality.
+endif
+
+if SND_SST_ATOM_HIFI2_PLATFORM
+
config SND_SOC_INTEL_BYTCR_RT5640_MACH
tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with
RT5640 codec"
depends on X86 && I2C && ACPI
select SND_SOC_RT5640
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail and
Baytrail-CR
platforms with RT5640 audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYTCR_RT5651_MACH
tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with
RT5651 codec"
depends on X86 && I2C && ACPI
select SND_SOC_RT5651
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail and
Baytrail-CR
platforms with RT5651 audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with
RT5672 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_RT5670
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Cherrytrail &
Braswell
platforms with RT5672 audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_CHT_BSW_RT5645_MACH
tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with
RT5645/5650 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_RT5645
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Cherrytrail &
Braswell
platforms with RT5645/5650 audio codec.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
@@ -121,63 +133,68 @@ config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_MAX98090
select SND_SOC_TS3A227E
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Cherrytrail &
Braswell
platforms with MAX98090 audio codec it also can support TI jack chip
as aux device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYT_CHT_DA7213_MACH
tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with
DA7212/7213 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_DA7213
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail &
CherryTrail
platforms with DA7212/7213 audio codec.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYT_CHT_ES8316_MACH
tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with
ES8316 codec"
depends on X86_INTEL_LPSS && I2C && ACPI
select SND_SOC_ES8316
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for Intel(R) Baytrail &
Cherrytrail platforms with ES8316 audio codec.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform
with no codec (MinnowBoard MAX, Up)"
+ default n
depends on X86_INTEL_LPSS && I2C && ACPI
- depends on SND_SST_ATOM_HIFI2_PLATFORM
select SND_SST_IPC_ACPI
help
This adds support for ASoC machine driver for the MinnowBoard Max or
Up boards and provides access to I2S signals on the Low-Speed
- connector
+ connector. This is not a recommended option outside of these cases.
+ It is not intended to be enabled by distros by default.
+ Say Y or m if you have such a device.
+
If unsure select "N".
+endif
+
+if SND_SOC_INTEL_SKYLAKE
+
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "ASoC Audio driver for SKL with RT286 I2S mode"
depends on X86 && ACPI && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT286
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
help
This adds support for ASoC machine driver for Skylake platforms
with RT286 I2S audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device.
If unsure select "N".
config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S
Mode"
depends on X86_INTEL_LPSS && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_NAU8825
select SND_SOC_SSM4567
select SND_SOC_DMIC
@@ -185,13 +202,12 @@ config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This will
create an alsa sound card for NAU88L25 + SSM4567.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S
Mode"
depends on X86_INTEL_LPSS && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_NAU8825
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -199,13 +215,12 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This will
create an alsa sound card for NAU88L25 + MAX98357A.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in
I2S Mode"
depends on X86 && ACPI && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_DA7219
select SND_SOC_MAX98357A
select SND_SOC_DMIC
@@ -214,13 +229,12 @@ config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
help
This adds support for ASoC machine driver for Broxton-P platforms
with DA7219 + MAX98357A I2S audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_BXT_RT298_MACH
tristate "ASoC Audio driver for Broxton with RT298 I2S mode"
depends on X86 && ACPI && I2C
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT298
select SND_SOC_DMIC
select SND_SOC_HDAC_HDMI
@@ -228,14 +242,13 @@ config SND_SOC_INTEL_BXT_RT298_MACH
help
This adds support for ASoC machine driver for Broxton platforms
with RT286 I2S audio codec.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S
Mode"
depends on X86_INTEL_LPSS && I2C
select SND_SOC_INTEL_SST
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT5663
select SND_SOC_MAX98927
select SND_SOC_DMIC
@@ -243,14 +256,13 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This will
create an alsa sound card for RT5663 + MAX98927.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927
in I2S Mode"
depends on X86_INTEL_LPSS && I2C && SPI
select SND_SOC_INTEL_SST
- depends on SND_SOC_INTEL_SKYLAKE
select SND_SOC_RT5663
select SND_SOC_RT5514
select SND_SOC_RT5514_SPI
@@ -259,7 +271,8 @@ config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH
help
This adds support for ASoC Onboard Codec I2S machine driver. This
will
create an alsa sound card for RT5663 + RT5514 + MAX98927.
- Say Y if you have such a device.
+ Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
+endif
endif
--
2.14.1
