On Tue, 28 Nov 2000, Francois romieu wrote:
> > NETDEV WATCHDOG: eth0: transmit timed out
> > eth0: Transmit timeout using MII device, Tx status 0003.
> > eth0: Restarting the EPIC chip, Rx 4568454/4568454 Tx 6262613/6262623.
> > eth0: epic_restart() done, cmd status 000a, ctl 0512 interrupt 240000.
>
> Could you describe a way to reproduce it or be more specific regarding
> the hardware/load/whatever ?
Well, during the heavy load tranfser for example big files (iso images)
over FTP or sending backup files by Amanda to other the machine in the
same network.
Linux RedHat 7.0+upgrades (glibc 2.2)
[root@mask /root]# procinfo
Linux 2.4.0-test11 ([EMAIL PROTECTED]) (gcc 2.96 20000731 ) #1 1CPU
[mask]
Memory: Total Used Free Shared Buffers
Cached
Mem: 255804 230416 25388 0 2180
96472
Swap: 311300 4 311296
Bootup: Sat Nov 25 23:20:16 2000 Load average: 0.15 0.32 0.34 1/112
17056
user : 5:13:02.51 7.9% page in : 12874041
nice : 0:02:59.64 0.1% page out: 2702219
system: 2:42:42.61 4.1% swap in : 2
idle : 2d 9:57:42.91 87.9% swap out: 1
uptime: 2d 17:56:27.67 context : 36996214
irq 0: 23738767 timer irq 7: 13183
irq 1: 2 keyboard irq 10: 11915007 eth0
irq 2: 0 cascade [4] irq 14: 1344730 ide0
irq 4: 106 serial irq 15: 406003 ide1
irq 6: 3
[root@mask /root]# cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 3).
Master Capable. Latency=64.
Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff].
Bus 0, device 1, function 0:
PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 3).
Master Capable. Latency=64. Min Gnt=137.
Bus 0, device 7, function 0:
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 2).
Bus 0, device 7, function 1:
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
Master Capable. Latency=64.
I/O at 0xf000 [0xf00f].
USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
IRQ 11.
Master Capable. Latency=64.
I/O at 0x6400 [0x641f].
Bus 0, device 7, function 3:
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 2).
Bus 0, device 12, function 0:
Ethernet controller: Standard Microsystems Corp [SMC] 83C170QF (rev 6).
IRQ 10.
Master Capable. Latency=64. Min Gnt=8.Max Lat=28.
I/O at 0x6800 [0x68ff].
Non-prefetchable 32 bit memory at 0xe8000000 [0xe8000fff].
Bus 1, device 0, function 0:
VGA compatible controller: S3 Inc. ViRGE/GX2 (rev 6).
IRQ 9.
Master Capable. Latency=64. Min Gnt=4.Max Lat=255.
Non-prefetchable 32 bit memory at 0xd8000000 [0xdbffffff].
[root@mask /root]# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 5
model name : Pentium II (Deschutes)
stepping : 2
cpu MHz : 350.000800
cache size : 512 KB
I have just found another strange message on this machine:
Attempt to read inode for relocated directory
What it means?
--
*[ Łukasz Trąbiński ]*
SysAdmin @wsisiz.edu.pl
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
