User-Mode Instruction Prevention (UMIP) is enabled by setting/clearing a bit in %cr4.
It makes sense to enable UMIP at some point while booting, before user spaces come up. Like SMAP and SMEP, is not critical to have it enabled very early during boot. This is because UMIP is relevant only when there is a user space to be protected from. Given these similarities, UMIP can be enabled along with SMAP and SMEP. At the moment, UMIP is disabled by default at build time. It can be enabled at build time by selecting CONFIG_X86_INTEL_UMIP. If enabled at build time, it can be disabled at run time by adding clearcpuid=514 to the kernel parameters. Cc: Andy Lutomirski <[email protected]> Cc: Andrew Morton <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Chen Yucong <[email protected]> Cc: Chris Metcalf <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Huang Rui <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Michael S. Tsirkin <[email protected]> Cc: Paul Gortmaker <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi V. Shankar <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Tony Luck <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: [email protected] Signed-off-by: Ricardo Neri <[email protected]> --- arch/x86/Kconfig | 10 ++++++++++ arch/x86/kernel/cpu/common.c | 25 ++++++++++++++++++++++++- 2 files changed, 34 insertions(+), 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 38da9bb..f08977d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1804,6 +1804,16 @@ config X86_SMAP If unsure, say Y. +config X86_INTEL_UMIP + def_bool n + depends on CPU_SUP_INTEL + prompt "Intel User Mode Instruction Prevention" if EXPERT + ---help--- + The User Mode Instruction Prevention (UMIP) is a security + feature in newer Intel processors. If enabled, a general + protection fault is issued if the instructions SGDT, SLDT, + SIDT, SMSW and STR are executed in user mode. + config X86_INTEL_MPX prompt "Intel MPX (Memory Protection Extensions)" def_bool n diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index f8bea7f..13ae9e5 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -329,6 +329,28 @@ static __always_inline void setup_smap(struct cpuinfo_x86 *c) } } +static __always_inline void setup_umip(struct cpuinfo_x86 *c) +{ + /* Check the boot processor, plus build option for UMIP. */ + if (!cpu_feature_enabled(X86_FEATURE_UMIP)) + goto out; + + /* Check the current processor's cpuid bits. */ + if (!cpu_has(c, X86_FEATURE_UMIP)) + goto out; + + cr4_set_bits(X86_CR4_UMIP); + + return; + +out: + /* + * Make sure UMIP is disabled in case it was enabled in a + * previous boot (e.g., via kexec). + */ + cr4_clear_bits(X86_CR4_UMIP); +} + /* * Protection Keys are not available in 32-bit mode. */ @@ -1147,9 +1169,10 @@ static void identify_cpu(struct cpuinfo_x86 *c) /* Disable the PN if appropriate */ squash_the_stupid_serial_number(c); - /* Set up SMEP/SMAP */ + /* Set up SMEP/SMAP/UMIP */ setup_smep(c); setup_smap(c); + setup_umip(c); /* * The vendor-specific functions might have changed features. -- 2.7.4
