early console in setup code
early console in extract_kernel
input_data: 0x00000000049133b4
input_len: 0x0000000000524844
output: 0x0000000001000000
output_len: 0x0000000002006ea4
kernel_total_size: 0x0000000003e6b000
booted via startup_32()
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
[    0.000000] Linux version 4.14.0-rc3-00002-gb664d57 (kbuild@intel17) (gcc version 4.9.4 (Debian 4.9.4-2)) #2 SMP PREEMPT Fri Nov 3 05:57:14 CST 2017
[    0.000000] Command line: ip=::::vm-ivb41-quantal-x86_64-20::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-ivb41-quantal-x86_64-20/boot-1-quantal-core-x86_64.cgz-b664d57f39d01e775204d4f1a7e2f8bda77bc549-20171103-49532-1x581u8-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-h0-11022356 branch=linux-devel/devel-catchup-201711022355 commit=b664d57f39d01e775204d4f1a7e2f8bda77bc549 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/vmlinuz-4.14.0-rc3-00002-gb664d57 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-ivb41-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
Memory KASLR using RDTSC...
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6a80-0x000f6a8f] mapped at [fffffffffd200a80]
[    0.000000]   mpc: f6a90-f6b74
[    0.000000] Base memory trampoline at [ffff8c6600099000] 99000 size 24576
[    0.000000] BRK [0x09a40000, 0x09a40fff] PGTABLE
[    0.000000] BRK [0x09a41000, 0x09a41fff] PGTABLE
[    0.000000] BRK [0x09a42000, 0x09a42fff] PGTABLE
[    0.000000] BRK [0x09a43000, 0x09a43fff] PGTABLE
[    0.000000] BRK [0x09a44000, 0x09a44fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1dd0d000-0x1ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6870 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE1628 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE147C 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 00143C (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE1570 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE15F0 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fc000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffdffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1dceb000-0x1dd0cfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1dc6b001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 7003158803 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000001ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[    0.000000] On node 0 totalpages: 130942
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1984 pages used for memmap
[    0.000000]   DMA32 zone: 126944 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000)
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 486 pages/cpu @ffff8c661c800000 s1952128 r8192 d30336 u2097152
[    0.000000] pcpu-alloc: s1952128 r8192 d30336 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1c80dac0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 128873
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-ivb41-quantal-x86_64-20::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-ivb41-quantal-x86_64-20/boot-1-quantal-core-x86_64.cgz-b664d57f39d01e775204d4f1a7e2f8bda77bc549-20171103-49532-1x581u8-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-h0-11022356 branch=linux-devel/devel-catchup-201711022355 commit=b664d57f39d01e775204d4f1a7e2f8bda77bc549 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/vmlinuz-4.14.0-rc3-00002-gb664d57 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-ivb41-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 c
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 411460K/523768K available (10546K kernel code, 4609K rwdata, 4396K rodata, 4380K init, 36204K bss, 112308K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 34752 entries in 136 pages
[    0.001000] Preemptible hierarchical RCU implementation.
[    0.001000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.001000] 	RCU callback double-/use-after-free debug enabled.
[    0.001000] 	RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[    0.001000] 	Tasks RCU enabled.
[    0.001000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.001000] NR_IRQS: 4352, nr_irqs: 440, preallocated irqs: 16
[    0.001000] Console: colour VGA+ 80x25
[    0.001000] console [tty0] enabled
[    0.001000] console [ttyS0] enabled
[    0.001000] console [ttyS0] enabled
[    0.001000] bootconsole [earlyser0] disabled
[    0.001000] bootconsole [earlyser0] disabled
[    0.001000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.001000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.001000] ... MAX_LOCK_DEPTH:          48
[    0.001000] ... MAX_LOCKDEP_KEYS:        8191
[    0.001000] ... CLASSHASH_SIZE:          4096
[    0.001000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.001000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.001000] ... CHAINHASH_SIZE:          32768
[    0.001000]  memory used by lock dependency info: 7871 kB
[    0.001000]  per task-struct memory footprint: 2688 bytes
[    0.001000] ODEBUG: selftest passed
[    0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.001000] hpet clockevent registered
[    0.001078] tsc: Detected 2693.508 MHz processor
[    0.002090] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.003062] pid_max: default: 32768 minimum: 301
[    0.004164] ACPI: Core revision 20170728
[    0.034275] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.035520] Security Framework initialized
[    0.037050] LoadPin: ready to pin (currently disabled)
[    0.038309] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.043133] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.044250] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.046055] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.051359] CPU: Physical Processor ID: 0
[    0.052108] mce: CPU supports 10 MCE banks
[    0.054151] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.055061] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.058491] Freeing SMP alternatives memory: 24K
[    0.064335] smpboot: Max logical packages: 2
[    0.066648] x2apic enabled
[    0.067047] Switched APIC routing to physical x2apic.
[    0.068075] enabled ExtINT on CPU#0
[    0.074347] ENABLING IO-APIC IRQs
[    0.075102] init IO_APIC IRQs
[    0.077061]  apic 0 pin 0 not connected
[    0.079160] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.080171] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0)
[    0.081000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0)
[    0.081000]  apic 0 pin 16 not connected
[    0.081000]  apic 0 pin 17 not connected
[    0.081000]  apic 0 pin 18 not connected
[    0.081000]  apic 0 pin 19 not connected
[    0.081000]  apic 0 pin 20 not connected
[    0.081000]  apic 0 pin 21 not connected
[    0.081000]  apic 0 pin 22 not connected
[    0.081000]  apic 0 pin 23 not connected
[    0.081000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.081000] Using local APIC timer interrupts.
[    0.081000] calibrating APIC timer ...
[    0.082000] ... lapic delta = 13205788
[    0.082000] ... PM-Timer delta = 756260
[    0.082000] APIC calibration not consistent with PM-Timer: 211ms instead of 100ms
[    0.082000] APIC delta adjusted to PM-Timer: 6250581 (13205788)
[    0.082000] TSC delta adjusted to PM-Timer: 269348785 (569061144)
[    0.082000] ..... delta 6250581
[    0.082000] ..... mult: 268460409
[    0.082000] ..... calibration result: 1000092
[    0.082000] ..... CPU clock speed is 2693.0487 MHz.
[    0.082000] ..... host bus clock speed is 1000.0092 MHz.
[    0.082910] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.090225] Performance Events: PMU not available due to virtualization, using software events only.
[    0.094398] Hierarchical SRCU implementation.
[    0.106089] smp: Bringing up secondary CPUs ...
[    0.119484] x86: Booting SMP configuration:
[    0.120064] .... node  #0, CPUs:      #1
[    0.001000] kvm-clock: cpu 1, msr 0:1dc6b041, secondary cpu clock
[    0.001000] masked ExtINT on CPU#1
[    0.144446] KVM setup async PF for cpu 1
[    0.145000] kvm-stealtime: cpu 1, msr 1ca0dac0
[    0.148096] smp: Brought up 1 node, 2 CPUs
[    0.149193] ----------------
[    0.150215] | NMI testsuite:
[    0.151181] --------------------
[    0.152044]   remote IPI:  ok  |
[    0.154044]    local IPI:  ok  |
[    0.156095] --------------------
[    0.157044] Good, all   2 testcases passed! |
[    0.158043] ---------------------------------
[    0.160052] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[    0.171058] devtmpfs: initialized
[    0.204455] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.206173] futex hash table entries: 512 (order: 4, 65536 bytes)
[    0.210136] prandom: seed boundary self test passed
[    0.222164] prandom: 100 self tests passed
[    0.224033] pinctrl core: initialized pinctrl subsystem
[    0.233956] RTC time:  6:02:19, date: 11/03/17
[    0.239637] NET: Registered protocol family 16
[    0.263385] workqueue: round-robin CPU selection forced, expect performance impact
[    0.266639] cpuidle: using governor ladder
[    0.270308] cpuidle: using governor menu
[    0.281175] ACPI: bus type PCI registered
[    0.287137] PCI: Using configuration type 1 for base access
[    0.507419] ACPI: Added _OSI(Module Device)
[    0.509057] ACPI: Added _OSI(Processor Device)
[    0.510058] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.511060] ACPI: Added _OSI(Processor Aggregator Device)
[    0.623302] ACPI: Interpreter enabled
[    0.625111] ACPI: (supports S0 S3 S5)
[    0.626052] ACPI: Using IOAPIC for interrupt routing
[    0.628333] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.642504] ACPI: Enabled 2 GPEs in block 00 to 0F
[    0.985285] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.986096] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments]
[    0.988052] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.990307] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.994000] PCI host bridge to bus 0000:00
[    0.995069] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.997050] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.998070] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.999069] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    1.000075] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.002123] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.017855] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.036046] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.051053] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    1.060050] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.061065] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.063062] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.064061] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.076227] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.082369] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.083116] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.091322] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.095069] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.101052] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.111054] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.118826] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.123053] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    1.126047] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    1.138054] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.144339] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    1.147050] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    1.179389] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.182477] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.185610] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.189209] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.191585] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.196998] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.197000] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.207093] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.225052] vgaarb: loaded
[    1.246841] pps_core: LinuxPPS API ver. 1 registered
[    1.258054] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.302788] FPGA manager framework
[    1.310133] PCI: Using ACPI for IRQ routing
[    1.321056] PCI: pci_cache_line_size set to 64 bytes
[    1.339383] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.351078] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[    1.401186] clocksource: Switched to clocksource kvm-clock
[    1.566910] Warning: could not register annotated branches stats
[    3.145390] pnp: PnP ACPI init
[    3.154215] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.167754] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    3.188694] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    3.208819] pnp 00:03: [dma 2]
[    3.219935] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    3.240496] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    3.260859] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.282831] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.324242] pnp: PnP ACPI: found 7 devices
[    3.581812] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    3.612275] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    3.628502] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    3.645345] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    3.661862] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    3.685836] NET: Registered protocol family 1
[    3.698609] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    3.718668] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    3.732015] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    3.751822] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    3.772913] PCI: CLS 0 bytes, default 64
[    3.802758] Unpacking initramfs...
[   42.628347] Freeing initrd memory: 35660K
[   42.665152] cryptomgr_test (34) used greatest stack depth: 14800 bytes left
[   42.692222] cryptomgr_test (38) used greatest stack depth: 14488 bytes left
[   42.741169] AVX or AES-NI instructions are not detected.
[   42.745794] CPU feature 'AVX registers' is not supported.
[   42.779760] rcu-perf:--- Start of test: nreaders=0 nwriters=2 verbose=1 shutdown=1
[   42.786902] rcu-torture: Creating rcu_perf_shutdown task
[   42.815307] rcu-torture: Creating rcu_perf_writer task
[   42.822240] rcu-torture: Creating rcu_perf_writer task
[   42.827110] rcu-perf: rcu_perf_writer task started
[   42.832622] rcu-perf: rcu_perf_writer task started
[   42.843904] Kprobe smoke test: started
[   43.572944] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[   43.589378] caller is debug_smp_processor_id+0x1c/0x1e
[   43.603335] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc3-00002-gb664d57 #2
[   43.604188] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   43.604188] Call Trace:
[   43.604188]  dump_stack+0x85/0xb0
[   43.604188]  check_preemption_disabled+0x11e/0x13a
[   43.604188]  debug_smp_processor_id+0x1c/0x1e
[   43.604188]  jprobe_return+0x1b/0x2e
[   43.604188]  j_kprobe_target+0x48/0x4d
[   43.604188]  init_test_probes+0x29a/0x5c3
[   43.604188]  init_kprobes+0x262/0x272
[   43.604188]  ? debugfs_kprobe_init+0xd6/0xd6
[   43.604188]  do_one_initcall+0xaa/0x1ae
[   43.604188]  kernel_init_freeable+0x20d/0x2b5
[   43.604188]  ? rest_init+0x157/0x157
[   43.604188]  kernel_init+0x14/0x15d
[   43.604188]  ? rest_init+0x157/0x157
[   43.604188]  ret_from_fork+0x25/0x30
[   43.769768] tsc: Refined TSC clocksource calibration: 2693.508 MHz
[   43.774901] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d349e8249, max_idle_ns: 440795288087 ns
[   44.108271] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[   44.115706] caller is debug_smp_processor_id+0x1c/0x1e
[   44.123287] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc3-00002-gb664d57 #2
[   44.136256] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   44.152148] Call Trace:
[   44.160150]  dump_stack+0x85/0xb0
[   44.168150]  check_preemption_disabled+0x11e/0x13a
[   44.176132]  debug_smp_processor_id+0x1c/0x1e
[   44.184148]  jprobe_return+0x1b/0x2e
[   44.192157]  j_kprobe_target+0x48/0x4d
[   44.200144]  init_test_probes+0x341/0x5c3
[   44.216147]  init_kprobes+0x262/0x272
[   44.220151]  ? debugfs_kprobe_init+0xd6/0xd6
[   44.236135]  do_one_initcall+0xaa/0x1ae
[   44.244151]  kernel_init_freeable+0x20d/0x2b5
[   44.252152]  ? rest_init+0x157/0x157
[   44.260151]  kernel_init+0x14/0x15d
[   44.268149]  ? rest_init+0x157/0x157
[   44.276148]  ret_from_fork+0x25/0x30
[   44.293463] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[   44.309634] caller is debug_smp_processor_id+0x1c/0x1e
[   44.318450] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc3-00002-gb664d57 #2
[   44.319354] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   44.319354] Call Trace:
[   44.319354]  dump_stack+0x85/0xb0
[   44.319354]  check_preemption_disabled+0x11e/0x13a
[   44.319354]  debug_smp_processor_id+0x1c/0x1e
[   44.319354]  jprobe_return+0x1b/0x2e
[   44.319354]  j_kprobe_target+0x48/0x4d
[   44.319354]  init_test_probes+0x37e/0x5c3
[   44.319354]  init_kprobes+0x262/0x272
[   44.319354]  ? debugfs_kprobe_init+0xd6/0xd6
[   44.319354]  do_one_initcall+0xaa/0x1ae
[   44.319354]  kernel_init_freeable+0x20d/0x2b5
[   44.319354]  ? rest_init+0x157/0x157
[   44.319354]  kernel_init+0x14/0x15d
[   44.319354]  ? rest_init+0x157/0x157
[   44.319354]  ret_from_fork+0x25/0x30
[   44.479432] int3: 0000 [#1] PREEMPT SMP
[   44.480285] Modules linked in:
[   44.480285] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc3-00002-gb664d57 #2
[   44.480285] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[   44.480285] task: ffff8c661c630000 task.stack: ffff8c661c638000
[   44.480285] RIP: 0010:jprobe_return_end+0x0/0x4
[   44.480285] RSP: 0000:0000000000000000 EFLAGS: 00000296
[   44.480285] RAX: ffff8c661ca00000 RBX: ffff8c661c63bd90 RCX: ffff8c661c630000
[   44.480285] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000296
[   44.480285] RBP: ffff8c661c63bd98 R08: 0000000000000000 R09: ffff8c661c630c10
[   44.480285] R10: 00000000fff5c8d7 R11: 0000000000000000 R12: 0000000000000001
[   44.480285] R13: 0000000000000000 R14: ffff8c661c631760 R15: 0000000000000000
[   44.480285] FS:  0000000000000000(0000) GS:ffff8c661ca00000(0000) knlGS:0000000000000000
[   44.480285] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   44.480285] CR2: 00000000ffffffff CR3: 0000000006e11000 CR4: 00000000000006e0
[   44.480285] Call Trace:
[   44.480285] Code: 00 00 55 48 89 e5 53 48 c7 c3 40 d9 00 00 e8 0c c2 11 00 e8 da 53 57 00 89 c0 48 8b 04 c5 40 13 7e 84 48 8b 5c 18 18 48 87 dc cc <90> 5b 5d c3 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 
[   44.480285] RIP: jprobe_return_end+0x0/0x4 RSP: 0000000000000000
[   44.683245] ---[ end trace 8b9e4a77732ab913 ]---
[   44.700247] Kernel panic - not syncing: Fatal exception
[   44.701147] Kernel Offset: 0x2800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Elapsed time: 60

initrds=(
	/osimage/quantal/quantal-core-x86_64.cgz
	/lkp/scheduled/vm-ivb41-quantal-x86_64-20/boot-1-quantal-core-x86_64.cgz-b664d57f39d01e775204d4f1a7e2f8bda77bc549-20171103-49532-1x581u8-0.cgz
	/lkp/lkp/lkp-x86_64.cgz
	/pkg/linux/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/modules.cgz
)

cat "${initrds[@]}" > /fs/sda5/initrd-vm-ivb41-quantal-x86_64-20

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/vmlinuz-4.14.0-rc3-00002-gb664d57
	-initrd /fs/sda5/initrd-vm-ivb41-quantal-x86_64-20
	-m 512
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-ivb41-quantal-x86_64-20
	-serial file:/dev/shm/kboot/vm-ivb41-quantal-x86_64-20/serial
	-serial file:/dev/shm/kboot/vm-ivb41-quantal-x86_64-20/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-ivb41-quantal-x86_64-20::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-ivb41-quantal-x86_64-20/boot-1-quantal-core-x86_64.cgz-b664d57f39d01e775204d4f1a7e2f8bda77bc549-20171103-49532-1x581u8-0.yaml
	ARCH=x86_64
	kconfig=x86_64-randconfig-h0-11022356
	branch=linux-devel/devel-catchup-201711022355
	commit=b664d57f39d01e775204d4f1a7e2f8bda77bc549
	BOOT_IMAGE=/pkg/linux/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/vmlinuz-4.14.0-rc3-00002-gb664d57
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-ivb41-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-h0-11022356/gcc-4.9/b664d57f39d01e775204d4f1a7e2f8bda77bc549/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	console=tty0
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
