On 10/25/2017 07:04 AM, Jose Abreu wrote:
> This adds the documentation for TSN feature EST and FP.
>
> Signed-off-by: Jose Abreu <joab...@synopsys.com>
> Cc: David S. Miller <da...@davemloft.net>
> Cc: Joao Pinto <jpi...@synopsys.com>
> Cc: Giuseppe Cavallaro <peppe.cavall...@st.com>
> Cc: Alexandre Torgue <alexandre.tor...@st.com>
> Cc: Rob Herring <robh...@kernel.org>
> ---
> Documentation/devicetree/bindings/net/stmmac.txt | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/stmmac.txt
> b/Documentation/devicetree/bindings/net/stmmac.txt
> index c3a7be6..6359df6 100644
> --- a/Documentation/devicetree/bindings/net/stmmac.txt
> +++ b/Documentation/devicetree/bindings/net/stmmac.txt
> @@ -114,6 +114,16 @@ Optional properties:
> - snps,high_credit: max write outstanding req. limit
> - snps,low_credit: max read outstanding req. limit
> - snps,priority: TX queue priority (Range: 0x0 to 0xF)
> +- TSN parameters: below the list of all the parameters to configure TSN
> + features (only applicable for IP version >= 5.00)
> + - snps,est: Enable EST algorithm
> + - If EST enabled provide these parameters:
> + - snps,btr: Array size of 2 with BTR value for EST algorithm
> + - snps,ctr: Array size of 2 with CTR value for EST algorithm
> + - snps,ter: TER value for EST algorithm
> + - snps,gcl: Variable size array with GCL table entries.
> + - snps,fp: Enable FP feature. This needs EST enabled.
You are using Device Tree as a configuration interface, that does not
sound right at all.
> +
> Examples:
>
> stmmac_axi_setup: stmmac-axi-config {
> @@ -151,6 +161,15 @@ Examples:
> };
> };
>
> + tsn_setup: tsn-config {
> + snps,est;
> + snps,btr = <0x00000000 0x00000001>;
> + snps,ctr = <0x00000000 0x10000000>;
> + snps,ter = <0x00000000>;
> + snps,gcl = <0x00000001 0x00000002 0x00000003>;
> + snps,fp;
> + };
> +
> gmac0: ethernet@e0800000 {
> compatible = "st,spear600-gmac";
> reg = <0xe0800000 0x8000>;
> @@ -176,4 +195,5 @@ Examples:
> };
> snps,mtl-rx-config = <&mtl_rx_setup>;
> snps,mtl-tx-config = <&mtl_tx_setup>;
> + snps,tsn-config = <&tsn_setup>;
Yes, this is definitively using Device Tree as a configuration
interface, don't do that please.
--
Florian
