On Thu, 23 Nov 2000, Kurt Garloff wrote:
> While 2.0e3 contains a bug that can cause an OOps inside the driver (just
> use the echo "INQUIRY 0" >/proc/scsi/tmscsim/?), the normal bus rescanning
> should not be able to trigger it. The above looks like the bug is occuring
> somewhere else.
> Having said this, I'd like to ask you to try 2.0e6 of the tmscsim driver and
> check whether you are able to reproduce the bug.
My previous mail was a tad too early. After I moved the bus back to the
Tekram DC-390U (sym53c8xx driver), I caught an oops again, and
rescan-scsi-bus.sh caught a SIGSEGV. There seems to be a kernel bug somewhere
in that SCSI handling stuff:
Before the oops:
----------------
scsi singledevice 0 0 0 0
scsi singledevice 0 0 1 0
scsi singledevice 0 0 2 0
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr3 at scsi0, channel 0, id 2, lun 0
scsi singledevice 0 0 3 0
Vendor: YAMAHA Model: CRW4416S Rev: 1.0j
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr4 at scsi0, channel 0, id 3, lun 0
sr4: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
scsi singledevice 0 0 4 0
sym53c875-0-<4,*>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 8)
Vendor: HP Model: HP35480A Rev: 1209
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st2 at scsi0, channel 0, id 4, lun 0
scsi singledevice 0 0 5 0
Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr5 at scsi0, channel 0, id 5, lun 0
scsi singledevice 0 0 6 0
sym53c875-0-<6,*>: FAST-5 SCSI 4.0 MB/s (250 ns, offset 8)
Vendor: TANDBERG Model: TDC 4222 Rev: =07:
Type: Sequential-Access ANSI SCSI revision: 02
Detected scsi tape st3 at scsi0, channel 0, id 6, lun 0
scsi singledevice 0 0 7 0
scsi singledevice 1 0 0 0
scsi singledevice 1 0 1 0
scsi singledevice 1 0 2 0
scsi singledevice 1 0 2 0
scsi singledevice 1 0 3 0
scsi singledevice 1 0 3 0
scsi singledevice 1 0 4 0
scsi singledevice 1 0 4 0
scsi singledevice 1 0 5 0
scsi singledevice 1 0 5 0
scsi singledevice 1 0 6 0
scsi singledevice 1 0 6 0
scsi singledevice 1 0 7 0
scsi singledevice 2 0 0 0
scsi singledevice 2 0 1 0
scsi singledevice 2 0 2 0
scsi singledevice 2 0 3 0
scsi singledevice 2 0 4 0
scsi singledevice 2 0 5 0
scsi singledevice 2 0 6 0
scsi singledevice 2 0 7 0
scsi singledevice 0 0 0 0
scsi singledevice 0 0 1 0
scsi singledevice 0 0 2 0
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr2 at scsi0, channel 0, id 2, lun 0
Oops ran through ksymoops:
--------------------------
Unable to handle kernel NULL pointer dereference at virtual address 00000052
current->tss.cr3 = 07106000, %%cr3 = 07106000
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[sr_finish+112/388]
EFLAGS: 00010206
eax: 00000000 ebx: 00000054 ecx: 00000005 edx: c7f9cc00
esi: c629bd50 edi: c7f9cc40 ebp: 00000001 esp: c629bd3c
ds: 0018 es: 0018 ss: 0018
Process rescan-scsi-bus (pid: 2846, process nr: 23, stackpage=c629b000)
Stack: 00000000 c7f88340 c02a9960 c629bd4c 00307273 c01fedaf c7f88700 c7555de0
c629becc c01fedf3 00000000 00000000 c7f88340 00000000 c6e132c0 c02cb0e0
c6e132c8 c0132793 c6e132c0 c629bda4 c629bda4 c0001a00 00020000 c63532c0
Call Trace: [scan_scsis+491/1076] [scan_scsis+559/1076] [get_new_inode+147/312]
[iget4+121/132] [vsprintf+720/764] [wake_up_process+64/76] [__wake_up+59/68]
Code: 80 48 52 20 a1 8c 99 2a c0 80 4c 18 16 08 a1 8c 99 2a c0 80
Using defaults from ksymoops -t elf32-i386 -a i386
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 80 48 52 20 orb $0x20,0x52(%eax)
Code; 00000004 Before first symbol
4: a1 8c 99 2a c0 mov 0xc02a998c,%eax
Code; 00000009 Before first symbol
9: 80 4c 18 16 08 orb $0x8,0x16(%eax,%ebx,1)
Code; 0000000e Before first symbol
e: a1 8c 99 2a c0 mov 0xc02a998c,%eax
Code; 00000013 Before first symbol
13: 80 00 00 addb $0x0,(%eax)
PGP signature
