Hi!
This error ocurrs when "named" is executed. It exists since
2.4.0-test10preX or so.
I'm using RedHat 7.0 and my ethernet card is a "Kingston EtheRx KNE20
Plug and Play ISA Adapter". I'm unable to access the Internet because
the ethernet card doesn't work :-(. Besides, the card uses two
interrupts (?) and there are two interfaces (eth0 y eth1) when I have
only one (?).
Bye!
--
D. Juan Piernas Cánovas
Departamento de Ingeniería y Tecnología de Computadores
Facultad de Informática. Universidad de Murcia
Campus de Espinardo - 30080 Murcia (SPAIN)
Tel.: +34968367657 Fax: +34968364151
email: [EMAIL PROTECTED]
PGP public key:
http://pgp.rediris.es:11371/pks/lookup?search=piernas%40ditec.um.es&op=index
CPU0
0: 11683 XT-PIC timer
1: 258 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 1 XT-PIC NE2000
10: 0 XT-PIC es1371
12: 0 XT-PIC NE2000
14: 3047 XT-PIC ide0
15: 6 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
0240-025f : eth1
02f8-02ff : serial(auto)
0300-031f : eth0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
e000-e00f : VIA Technologies, Inc. Bus Master IDE
e000-e007 : ide0
e008-e00f : ide1
e800-e83f : Ensoniq ES1371 [AudioPCI-97]
e800-e83f : es1371
Card 1 'KTC2000:Kingston EtheRx KNE20 Plug and Play ISA Adapter' PnP version 1.0
Product version 1.0
Logical device 0 'RTL8019:Unknown'
Supported registers 0x2
Compatible device PNP80d6
Device is active
Active port 0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff,0xffff
Active IRQ 255 [0xff],255 [0xff]
Active DMA 255,255
Active memory 0xffffffff,0xffffffff,0xffffffff,0xffffffff
Resources 0
Priority preferred
Port 0x240-0x380, align 0x1f, size 0x20, 10-bit address decoding
IRQ 3,4,5,2/9,10,11,12,15 High-Edge
