Convert the DTS sound setup to use the simple-audio-card driver.

Signed-off-by: Lothar Waßmann <l...@karo-electronics.de>
---
 arch/arm/boot/dts/imx6qdl-tx6.dtsi | 50 ++++++++++++++++++++++++++++++++------
 1 file changed, 42 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi 
b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index c6b2d63..e0dbf8b 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -43,6 +43,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
        aliases {
@@ -183,24 +184,56 @@
        };
 
        sound {
-               compatible = "karo,imx6qdl-tx6qdl-sgtl5000",
-                            "fsl,imx-audio-sgtl5000";
-               model = "sgtl5000-audio";
+               compatible = "karo,imx6qdl-tx6-sgtl5000",
+                            "simple-audio-card";
+               simple-audio-card,name = "imx6qdl-tx6-sgtl5000-audio";
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_audmux>;
-               ssi-controller = <&ssi1>;
-               audio-codec = <&sgtl5000>;
-               audio-routing =
+               simple-audio-card,format = "i2s";
+               simple-audio-card,bitclock-master = <&codec_dai>;
+               simple-audio-card,frame-master = <&codec_dai>;
+               simple-audio-card,widgets =
+                       "Microphone", "Mic Jack",
+                       "Line", "Line In",
+                       "Line", "Line Out",
+                       "Headphone", "Headphone Jack";
+               simple-audio-card,routing =
                        "MIC_IN", "Mic Jack",
                        "Mic Jack", "Mic Bias",
                        "Headphone Jack", "HP_OUT";
-               mux-int-port = <1>;
-               mux-ext-port = <5>;
+
+               cpu_dai: simple-audio-card,cpu {
+                       sound-dai = <&ssi1>;
+               };
+
+               codec_dai: simple-audio-card,codec {
+                       sound-dai = <&sgtl5000>;
+               };
        };
 };
 
 &audmux {
        status = "okay";
+
+       ssi1 {
+               fsl,audmux-port = <0>;
+               fsl,port-config = <
+                       (IMX_AUDMUX_V2_PTCR_SYN |
+                       IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+                       IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+                       IMX_AUDMUX_V2_PTCR_TFSDIR |
+                       IMX_AUDMUX_V2_PTCR_TCLKDIR)
+                       IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+               >;
+       };
+
+       pins5 {
+               fsl,audmux-port = <4>;
+               fsl,port-config = <
+                       IMX_AUDMUX_V2_PTCR_SYN
+                       IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+               >;
+       };
 };
 
 &can1 {
@@ -298,6 +331,7 @@
 
        sgtl5000: sgtl5000@0a {
                compatible = "fsl,sgtl5000";
+               #sound-dai-cells = <0>;
                reg = <0x0a>;
                VDDA-supply = <&reg_2v5>;
                VDDIO-supply = <&reg_3v3>;
-- 
2.1.4

Reply via email to