> +static void ksz9477_phy_setup(struct ksz_device *dev, int port,
> + struct phy_device *phy)
> +{
> + if (port < dev->phy_port_cnt) {
> + /* SUPPORTED_Asym_Pause and SUPPORTED_Pause can be removed to
> + * disable flow control when rate limiting is used.
> + */
> + phy->advertising = phy->supported;
> + }
> +}
> +
This has nothing to do with MIBs. It does not belong in this patch.
> static void ksz9477_port_setup(struct ksz_device *dev, int port, bool
> cpu_port)
> {
> u8 data8;
> @@ -1159,6 +1198,8 @@ static int ksz9477_setup(struct dsa_switch *ds)
> /* start switch */
> ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
>
> + ksz_init_mib_timer(dev);
> +
> return 0;
> }
>
> @@ -1168,6 +1209,7 @@ static int ksz9477_setup(struct dsa_switch *ds)
> .set_addr = ksz9477_set_addr,
> .phy_read = ksz9477_phy_read16,
> .phy_write = ksz9477_phy_write16,
> + .adjust_link = ksz_adjust_link,
Please move the adjust_link changes into a separate patch.
I need to come back at look at the mutex's and the freeze code. It is
not obviously correct, and i don't have the time at the moment.
Andrew
