The Arasan controller is based on a FPGA platform and has integrated phy
with specific phy registers used during the initialization and
management of different modes. The phy and the controller are integrated
and registers are very specific to Arasan.

Arasan being an IP provider, licenses these IPs to various companies for
integration of IP in custom SOCs. The custom SOCs define own register
map depending on how bits are tied inside the SOC for phy registers,
depending on SOC memory plan and hence will require own platform drivers.

If more details on phy registers are required, an interface document is
hosted at https://arasan.com/NF/eMMC5.1 PHY Programming in Linux.pdf.

Signed-off-by: Atul Garg <ag...@arasan.com>
---
 drivers/mmc/host/Makefile           |  18 +-
 drivers/mmc/host/sdhci-pci-arasan.c | 325 ++++++++++++++++++++++++++++++++++++
 drivers/mmc/host/sdhci-pci-arasan.h |  80 +++++++++
 drivers/mmc/host/sdhci-pci-core.c   |  16 ++
 drivers/mmc/host/sdhci-pci.h        |   4 +
 5 files changed, 431 insertions(+), 12 deletions(-)
 create mode 100644 drivers/mmc/host/sdhci-pci-arasan.c
 create mode 100644 drivers/mmc/host/sdhci-pci-arasan.h

diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 2b5a813..b9b2c6c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -2,15 +2,14 @@
 # Makefile for MMC/SD host controller drivers
 #
 
-obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o
-armmmci-y := mmci.o
-armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
+obj-$(CONFIG_MMC_ARMMMCI)      += mmci.o
+obj-$(CONFIG_MMC_QCOM_DML)     += mmci_qcom_dml.o
 obj-$(CONFIG_MMC_PXA)          += pxamci.o
 obj-$(CONFIG_MMC_MXC)          += mxcmmc.o
 obj-$(CONFIG_MMC_MXS)          += mxs-mmc.o
 obj-$(CONFIG_MMC_SDHCI)                += sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)    += sdhci-pci.o
-sdhci-pci-y                    += sdhci-pci-core.o sdhci-pci-o2micro.o
+sdhci-pci-y                    += sdhci-pci-core.o sdhci-pci-o2micro.o 
sdhci-pci-arasan.o
 obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI))       += sdhci-pci-data.o
 obj-$(CONFIG_MMC_SDHCI_ACPI)   += sdhci-acpi.o
 obj-$(CONFIG_MMC_SDHCI_PXAV3)  += sdhci-pxav3.o
@@ -37,13 +36,9 @@ obj-$(CONFIG_MMC_S3C)        += s3cmci.o
 obj-$(CONFIG_MMC_SDRICOH_CS)   += sdricoh_cs.o
 obj-$(CONFIG_MMC_TMIO)         += tmio_mmc.o
 obj-$(CONFIG_MMC_TMIO_CORE)    += tmio_mmc_core.o
-obj-$(CONFIG_MMC_SDHI)         += renesas_sdhi_core.o
-ifeq ($(subst m,y,$(CONFIG_MMC_SDHI_SYS_DMAC)),y)
-obj-$(CONFIG_MMC_SDHI)         += renesas_sdhi_sys_dmac.o
-endif
-ifeq ($(subst m,y,$(CONFIG_MMC_SDHI_INTERNAL_DMAC)),y)
-obj-$(CONFIG_MMC_SDHI)         += renesas_sdhi_internal_dmac.o
-endif
+tmio_mmc_core-y                        := tmio_mmc_pio.o
+tmio_mmc_core-$(subst m,y,$(CONFIG_MMC_SDHI))  += tmio_mmc_dma.o
+obj-$(CONFIG_MMC_SDHI)         += sh_mobile_sdhi.o
 obj-$(CONFIG_MMC_CB710)                += cb710-mmc.o
 obj-$(CONFIG_MMC_VIA_SDMMC)    += via-sdmmc.o
 obj-$(CONFIG_SDH_BFIN)         += bfin_sdh.o
@@ -89,7 +84,6 @@ obj-$(CONFIG_MMC_SDHCI_MSM)           += sdhci-msm.o
 obj-$(CONFIG_MMC_SDHCI_ST)             += sdhci-st.o
 obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32)        += sdhci-pic32.o
 obj-$(CONFIG_MMC_SDHCI_BRCMSTB)                += sdhci-brcmstb.o
-obj-$(CONFIG_MMC_SDHCI_OMAP)           += sdhci-omap.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
        CFLAGS-cb710-mmc        += -DDEBUG
diff --git a/drivers/mmc/host/sdhci-pci-arasan.c 
b/drivers/mmc/host/sdhci-pci-arasan.c
new file mode 100644
index 0000000..57fbf8f
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-arasan.c
@@ -0,0 +1,325 @@
+/*
+ * Copyright (C) 2017 Arasan Chip Systems Inc.,
+ *
+ * Authors: Atul Garg <ag...@arasan.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "sdhci.h"
+#include "sdhci-pci.h"
+#include "sdhci-pci-arasan.h"
+
+static int arasan_phy_write(struct sdhci_host *host, u8 data, u8 offset)
+{
+       u32 timeout;
+       u8 busy;
+
+       sdhci_writew(host, data, HOST_PHY_DATA_REG);
+       sdhci_writew(host, ((1<<8) | offset), HOST_PHY_ADDR_REG);
+       timeout = 20;
+       do {
+               busy = sdhci_readw(host, HOST_PHY_ADDR_REG) & (1<<9);
+               if (!busy)
+                       break;
+               mdelay(1);
+       } while (timeout--);
+       if (!timeout)
+               return -ENODEV;
+       return 0;
+}
+
+static int arasan_phy_read(struct sdhci_host *host, u8 offset, u8 *data)
+{
+       u32 timeout;
+       u8 busy;
+
+       sdhci_writew(host, 0, HOST_PHY_DATA_REG);
+       *data = sdhci_readw(host, HOST_PHY_DATA_REG) & 0xFF;
+       sdhci_writew(host, ((0<<8) | offset), HOST_PHY_ADDR_REG);
+       timeout = 20;
+       do {
+               busy = sdhci_readw(host, HOST_PHY_ADDR_REG) & (1<<9);
+               if (!busy)
+                       break;
+               mdelay(1);
+       } while (timeout--);
+       if (!timeout)
+               return -ENODEV;
+       *data = sdhci_readw(host, HOST_PHY_DATA_REG) & 0xFF;
+       return 0;
+}
+
+/* Initialize the Arasan PHY */
+static int arasan_phy_init(struct sdhci_host *host)
+{
+       struct sdhci_pci_slot *slot = sdhci_priv(host);
+       struct pci_dev *pdev = slot->chip->pdev;
+       u8 val;
+
+       if (arasan_phy_write(host, 0, PHY_CONTROL))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_IOPADCONTROL1, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | RETB_ENABLE, PHY_IOPADCONTROL1))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_IOPADCONTROL2, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | RTRIM_ENABLE, PHY_IOPADCONTROL2))
+               return -ENODEV;
+       mdelay(10);
+
+       if (arasan_phy_read(host, PHY_IOPADSTATUS, &val)) {
+               if (!(val & CALDONE_MASK)) {
+                       dev_err(&pdev->dev, "Phy calibration not done\n");
+                       return -ENODEV;
+               }
+       }
+       if (arasan_phy_read(host, PHY_IOPADCONTROL1, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | PDB_ENABLE, PHY_IOPADCONTROL1))
+               return -ENODEV;
+       mdelay(10);
+
+       if (arasan_phy_read(host, PHY_IOPADSTATUS, &val)) {
+               if (!(val & CALDONE_MASK)) {
+                       dev_err(&pdev->dev, "Phy calibration not done\n");
+                       return -ENODEV;
+               }
+       }
+       if (arasan_phy_read(host, PHY_IORENCONTROL1, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | REN_CMD | REN_STRB, PHY_IORENCONTROL1))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_IOPUCONTROL1, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | PU_CMD, PHY_IOPUCONTROL1))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_CMDCONTROL, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | PDB_CMD, PHY_CMDCONTROL))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_IORENCONTROL2, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | REN_DAT, PHY_IORENCONTROL2))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_IOPUCONTROL2, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | PU_DAT, PHY_IOPUCONTROL2))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_DATACONTROL, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | PDB_DAT, PHY_DATACONTROL))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_STROBECONTROL, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | PDB_STRB, PHY_STROBECONTROL))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_CLKCONTROL, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | PDB_CLK, PHY_CLKCONTROL))
+               return -ENODEV;
+       if (arasan_phy_read(host, PHY_CLKBUFSELECT, &val))
+               return -ENODEV;
+       if (arasan_phy_write(host, val | 0x7, PHY_CLKBUFSELECT))
+               return -ENODEV;
+       if (arasan_phy_write(host, 0x4, PHY_MODECONTROL))
+               return -ENODEV;
+       return 0;
+}
+
+
+static int arasan_set_phy(struct sdhci_host *host)
+{
+       u8 clk_sel;
+       static u32 chg_clk;
+       u8 val;
+       u8 otap, itap, dll_sts, io_pad;
+
+       if (chg_clk != host->mmc->ios.clock) {
+               chg_clk = host->mmc->ios.clock;
+               if (host->mmc->ios.clock == 200000000)
+                       clk_sel = 0;
+               else if (host->mmc->ios.clock == 100000000)
+                       clk_sel = 2;
+               else if (host->mmc->ios.clock == 50000000)
+                       clk_sel = 1;
+               else
+                       clk_sel = 0;
+               /* Change phy settings only if there is a change in clock */
+               goto set_phy;
+       } else
+               return 0;
+set_phy:
+       if (host->mmc_host_ops.hs400_enhanced_strobe) {
+               if (arasan_phy_write(host, 0x1, PHY_MODECONTROL))
+                       return -ENODEV;
+               otap = ((0x2<<1) | OTAP_DLY_EN);
+               if (arasan_phy_write(host, otap, PHY_OUTPUTTAPDELAY))
+                       return -ENODEV;
+               if (arasan_phy_write(host, 0, PHY_INPUTTAPDELAY))
+                       return -ENODEV;
+               if (arasan_phy_write(host, DLL_TRIM, PHY_DLLTRIM))
+                       return -ENODEV;
+               if (arasan_phy_write(host, 0, PHY_DLLCONTROL))
+                       return -ENODEV;
+               dll_sts = (clk_sel<<5) | DLL_ENABLE;
+               if (arasan_phy_write(host, dll_sts, PHY_DLLCONTROL))
+                       return -ENODEV;
+               if (arasan_phy_read(host, PHY_DLLCONTROL, &val))
+                       return -ENODEV;
+       } else {
+               switch (host->mmc->ios.timing) {
+               case MMC_TIMING_LEGACY:
+                       if (arasan_phy_write(host, 0x4, PHY_MODECONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_INPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_OUTPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_DLLCONTROL, &val))
+                               return -ENODEV;
+                       break;
+               case MMC_TIMING_MMC_HS:
+                       if (arasan_phy_write(host, 0, PHY_MODECONTROL))
+                               return -ENODEV;
+                       otap = ((0x2<<3) | OTAP_DLY_EN);
+                       if (arasan_phy_write(host, otap, PHY_OUTPUTTAPDELAY))
+                               return -ENODEV;
+                       itap = ((0x2<<1) | ITAP_DLY_EN);
+                       if (arasan_phy_write(host, itap, PHY_INPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_INPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, DLL_TRIM, PHY_DLLTRIM))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       dll_sts = (clk_sel<<5) | DLL_ENABLE;
+                       if (arasan_phy_write(host, dll_sts, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_DLLCONTROL, &val))
+                               return -ENODEV;
+                       break;
+               case MMC_TIMING_MMC_HS200:
+                       if (arasan_phy_write(host, 0, PHY_MODECONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_IOPADCONTROL1, &val))
+                               return -ENODEV;
+                       io_pad = val | (host->mmc->ios.drv_type<<2);
+                       if (arasan_phy_write(host, io_pad, PHY_IOPADCONTROL1))
+                               return -ENODEV;
+                       otap = ((0x2<<1) | OTAP_DLY_EN);
+                       if (arasan_phy_write(host, otap, PHY_OUTPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_INPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, DLL_TRIM, PHY_DLLTRIM))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       dll_sts = (clk_sel<<5) | DLL_ENABLE;
+                       if (arasan_phy_write(host, dll_sts, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_DLLCONTROL, &val))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_DLLCONTROL, &val))
+                               return -ENODEV;
+                       break;
+               case MMC_TIMING_UHS_DDR50:
+                       if (arasan_phy_write(host, 0x8, PHY_MODECONTROL))
+                               return -ENODEV;
+                       otap = ((0x2<<3) | OTAP_DLY_EN);
+                       if (arasan_phy_write(host, otap, PHY_OUTPUTTAPDELAY))
+                               return -ENODEV;
+                       itap = ((0x2<<1) | ITAP_DLY_EN);
+                       if (arasan_phy_write(host, itap, PHY_INPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, DLL_TRIM, PHY_DLLTRIM))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       dll_sts = (clk_sel<<5) | DLL_ENABLE;
+                       if (arasan_phy_write(host, dll_sts, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_DLLCONTROL, &val))
+                               return -ENODEV;
+                       break;
+               case MMC_TIMING_MMC_HS400:
+                       if (arasan_phy_write(host, 0x2, PHY_MODECONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_IOPADCONTROL1, &val))
+                               return -ENODEV;
+                       io_pad = val | (host->mmc->ios.drv_type<<2);
+                       if (arasan_phy_write(host, io_pad, PHY_IOPADCONTROL1))
+                               return -ENODEV;
+                       otap = ((0x2<<1) | OTAP_DLY_EN);
+                       if (arasan_phy_write(host, otap, PHY_OUTPUTTAPDELAY))
+                               return -ENODEV;
+                       itap = ((0xA<<1) | ITAP_DLY_EN);
+                       if (arasan_phy_write(host, itap, PHY_INPUTTAPDELAY))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, DLL_TRIM, PHY_DLLTRIM))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       dll_sts = (clk_sel<<5) | DLL_ENABLE;
+                       if (arasan_phy_write(host, dll_sts, PHY_DLLCONTROL))
+                               return -ENODEV;
+                       if (arasan_phy_read(host, PHY_DLLCONTROL, &val))
+                               return -ENODEV;
+                       if (arasan_phy_write(host, 0x0E, PHY_CLKBUFSELECT))
+                               return -ENODEV;
+                       break;
+               default:
+                       break;
+               }
+       }
+       return 0;
+}
+
+int arasan_pci_probe(struct sdhci_pci_chip *chip)
+{
+       struct pci_dev *dev;
+
+       dev = pci_get_device(PCI_VENDOR_ID_ARASAN,
+                       PCI_DEVICE_ID_ARASAN_PHY_EMMC, NULL);
+       return 0;
+}
+int arasan_pci_probe_slot(struct sdhci_pci_slot *slot)
+{
+       int err;
+
+       err = arasan_phy_init(slot->host);
+       if (err)
+               return -ENODEV;
+       return 0;
+}
+
+void arasan_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+       u16 clk;
+
+       host->mmc->actual_clock = 0;
+       sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+       if (clock == 0)
+               return;
+       clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock);
+       sdhci_enable_clk(host, clk);
+
+       /*Change phy settings for the new clock */
+       arasan_set_phy(host);
+}
diff --git a/drivers/mmc/host/sdhci-pci-arasan.h 
b/drivers/mmc/host/sdhci-pci-arasan.h
new file mode 100644
index 0000000..819ed93
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-arasan.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2017 Arasan Chip Systems Inc.,
+ *
+ * Authors: Atul Garg <ag...@arasan.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SDHCI_PCI_ARASAN_H
+#define __SDHCI_PCI_ARASAN_H
+
+#include "sdhci-pci.h"
+
+/* Extra registers for Arasan SD Host Controller for eMMC5.1 PHY */
+#define HOST_PHY_ADDR_REG      0x300
+#define HOST_PHY_DATA_REG      0x304
+
+#define PHY_DLLCONTROL         0x00
+#define PHY_IOPADCONTROL1      0x01
+#define PHY_IOPADCONTROL2      0x02
+#define PHY_IOPADSTATUS        0x03
+#define PHY_IOODCONTROL1       0x04
+#define PHY_IOODCONTROL2       0x05
+#define PHY_IORENCONTROL1      0x06
+#define PHY_IORENCONTROL2      0x07
+#define PHY_IOPUCONTROL1       0x08
+#define PHY_IOPUCONTROL2       0x09
+#define PHY_IOODRELCONTROL1    0x0A
+#define PHY_IOODRELCONTROL2    0x0B
+#define PHY_INPUTTAPDELAY      0x0C
+#define PHY_OUTPUTTAPDELAY     0x0D
+#define PHY_STROBESELECT       0x0E
+#define PHY_CLKBUFSELECT       0x0F
+#define PHY_MODECONTROL        0x11
+#define PHY_DLLTRIM            0x12
+#define PHY_LDOCONTROL         0x1F
+#define PHY_CMDCONTROL         0x20
+#define PHY_DATACONTROL        0x21
+#define PHY_STROBECONTROL      0x22
+#define PHY_CLKCONTROL         0x23
+#define PHY_CONTROL            0x24
+
+#define DLL_ENABLE     BIT(3)
+#define RTRIM_ENABLE   BIT(1)
+#define PDB_ENABLE     BIT(1)
+#define RETB_ENABLE    BIT(6)
+#define ODEN_CMD       BIT(1)
+#define ODEN_DAT       0xFF
+#define REN_STRB       BIT(0)
+#define REN_CMD        BIT(1)
+#define REN_DAT        0xFF
+#define PU_CMD         BIT(1)
+#define PU_DAT         0xFF
+#define ITAP_DLY_EN    BIT(0)
+#define OTAP_DLY_EN    BIT(0)
+#define OD_REL_CMD     BIT(1)
+#define OD_REL_DAT     0xFF
+#define DLL_TRIM       0x8
+#define PDB_CMD        BIT(0)
+#define PDB_DAT        0xFF
+#define PDB_STRB       BIT(0)
+#define PDB_CLK        BIT(0)
+#define LDO_RDYB       0xFE
+#define CALDONE_MASK   0x10
+
+extern int arasan_pci_probe_slot(struct sdhci_pci_slot *slot);
+
+extern int arasan_pci_probe(struct sdhci_pci_chip *chip);
+
+extern void arasan_sdhci_set_clock(struct sdhci_host *host, unsigned int 
clock);
+
+#endif /* __SDHCI_PCI_ARASAN_H */
diff --git a/drivers/mmc/host/sdhci-pci-core.c 
b/drivers/mmc/host/sdhci-pci-core.c
index 5f3f7b5..3bd77dd 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -1112,6 +1112,21 @@ static const struct sdhci_pci_fixes sdhci_rtsx = {
        .probe_slot     = rtsx_probe_slot,
 };
 
+static const struct sdhci_ops arasan_sdhci_pci_ops = {
+       .set_clock                      = arasan_sdhci_set_clock,
+       .enable_dma                     = sdhci_pci_enable_dma,
+       .set_bus_width                  = sdhci_pci_set_bus_width,
+       .reset                          = sdhci_reset,
+       .set_uhs_signaling              = sdhci_set_uhs_signaling,
+};
+
+static const struct sdhci_pci_fixes sdhci_arasan = {
+       .probe      = arasan_pci_probe,
+       .probe_slot = arasan_pci_probe_slot,
+       .ops        = &arasan_sdhci_pci_ops,
+};
+
+
 /*AMD chipset generation*/
 enum amd_chipset_gen {
        AMD_CHIPSET_BEFORE_ML,
@@ -1314,6 +1329,7 @@ static const struct pci_device_id pci_ids[] = {
        SDHCI_PCI_DEVICE(O2, SDS1,     o2),
        SDHCI_PCI_DEVICE(O2, SEABIRD0, o2),
        SDHCI_PCI_DEVICE(O2, SEABIRD1, o2),
+       SDHCI_PCI_DEVICE(ARASAN, PHY_EMMC, arasan),
        SDHCI_PCI_DEVICE_CLASS(AMD, SYSTEM_SDHCI, PCI_CLASS_MASK, amd),
        /* Generic SD host controller */
        {PCI_DEVICE_CLASS(SYSTEM_SDHCI, PCI_CLASS_MASK)},
diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h
index 3c1dd79..e370836 100644
--- a/drivers/mmc/host/sdhci-pci.h
+++ b/drivers/mmc/host/sdhci-pci.h
@@ -48,6 +48,10 @@
 
 #define PCI_SUBDEVICE_ID_NI_7884       0x7884
 
+/* Arasan Device IDs */
+#define PCI_VENDOR_ID_ARASAN   0x16e6
+#define PCI_DEVICE_ID_ARASAN_PHY_EMMC  0x0670
+
 /*
  * PCI device class and mask
  */
-- 
2.7.4


-- 
ATTENTION: 

The information contained in this message may be legally privileged and 
confidential.  It is intended to be read only by the individual or entity 
to whom it is addressed or by their designee. If the reader of this message 
is not the intended recipient, you are on notice that any distribution of 
this message, in any form, is strictly prohibited by law.


If you have received this message in error, please immediately notify the 
sender and/or Arasan Chip Systems, Inc. by telephone at (408) 282-1600 and 
delete or destroy any copy of this message.

Reply via email to