> -----Original Message----- > From: Wendy Liang [mailto:[email protected]] > Sent: Thursday, September 21, 2017 3:59 PM > To: [email protected] > Cc: [email protected]; Cyril Chemparathy <[email protected]>; > Michal Simek <[email protected]>; Jiaying Liang <[email protected]> > Subject: [RFC LINUX PATCH] Dcoumentation: dt: mailbox: Add Xilinx IPI > Mailbox > > Xilinx ZynqMP IPI(Inter Processor Interrupt) is a hardware block in ZynqMP > SoC used for the communication between various processor systems. > > Signed-off-by: Wendy Liang <[email protected]> > --- > .../bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt | 88 > ++++++++++++++++++++++ > 1 file changed, 88 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt > > diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi- > mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi- > mailbox.txt > new file mode 100644 > index 0000000..5d915d1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox. > +++ txt > @@ -0,0 +1,88 @@ > +Xilinx IPI Mailbox Driver > +======================================== > + > +The Xilinx IPI(Inter Processor Interrupt) mailbox driver is a mailbox > +controller that manages the messaging between two IPI agents. Each IPI > +mailbox has request and response buffers between the two IPI agents. > + > ++-------------------------------------+ > +| | Xilinx ZynqMP IPI Mailbox > +| Controller| > +| | > +| +-------------+ > +| | SMC | > +| | | > ++--------+--------------+------+------+ > + | | > + | +-----------------+ > + | | ATF (ARM trusted firmware) > + | | > ++-------------------------------------+ > + | | Hardware > + | | > + +--------------------------------------+ > + | | > + +----------------------+ +-----------+ | > + | | Buffers between | | IPI Agent | | > + | | two IPI agents | | Registers | | > + | +--------------------+ +-----------+ | > + | | > + | Xilinx ZynqMP IPI | > + +--------------------------------------+ > + > + > +Message Manager Device Node: > +=========================== > +Required properties: > +-------------------- > +- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox" > +- ipi-smc-fid-base Base offset of SMC function IDs for IPI mailbox SMC. > + It contains the IPI IDs of the two IPI agents. > +- reg: IPI request and response buffers address range. > It > + can be the IPI buffers from the hardware or it can > + be carved out shared memory. > +- reg-names: Reg resource name of the IPI request and response > + buffers. > +- #mbox-cells: Shall be 1. Contains the logical channel IDs of > the > + channels on the IPI mailbox. > +- interrupt-parent: Phandle for the interrupt controller. > +- interrupts: Interrupt mapping. > + > +Required properties: > +-------------------- > +- method: The method of accessing the IPI agent registers. > + Permitted values are: "smc" and "hvc". Default is > + "smc". > +Example: > +------------ > + /* APU IPI mailbox driver */ > + ipis { > + #address-cells = <1>; > + #size-cells = <0>; > + ipi_mailbox_apu_rpu0: ipi_mailbox@0 { > + compatible = "xlnx,zynqmp-ipi-mailbox"; > + reg = <0 0xff990400 40>; > + reg-names = "apu-rpu0"; > + ipi-smc-fid-base = <0x1010>; > + method = "smc"; > + #mbox-cells = <1>; > + interrupt-parent = <&gic>; > + interrupts = <0 35 4>; > + }; > + ipi_mailbox_apu_rpu1: ipi_mailbox@1 { > + compatible = "xlnx,zynqmp-ipi-mailbox"; > + reg = <0 0xff990440 40>; > + reg-names = "apu-rpu1"; > + ipi-smc-fid-base = <0x1020>; > + method = "smc"; > + #mbox-cells = <1>; > + interrupt-parent = <&gic>; > + interrupts = <0 35 4>; > + }; > + }; > + device0: device0 { > + ... > + mbox-names = "rpu0", "rpu1", > + mboxes = <&ipi_mailbox_apu_rpu0 0>, > + < &ipi_mailbox_apu_rpu1 0>; > + }; > -- > 2.7.4
cc: device tree and linux arm kernel mailing lists.
