Now that there is documentation for the ds1307 and compatible RTCs, merge
the ds1339 documentation in it.
Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
.../devicetree/bindings/rtc/dallas,ds1339.txt | 18 ------------------
Documentation/devicetree/bindings/rtc/rtc-ds1307.txt | 6 ++++++
2 files changed, 6 insertions(+), 18 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
deleted file mode 100644
index 916f57601a8f..000000000000
--- a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-* Dallas DS1339 I2C Serial Real-Time Clock
-
-Required properties:
-- compatible: Should contain "dallas,ds1339".
-- reg: I2C address for chip
-
-Optional properties:
-- trickle-resistor-ohms : Selected resistor for trickle charger
- Values usable for ds1339 are 250, 2000, 4000
- Should be given if trickle charger should be enabled
-- trickle-diode-disable : Do not use internal trickle charger diode
- Should be given if internal trickle charger diode should be disabled
-Example:
- ds1339: rtc@68 {
- compatible = "dallas,ds1339";
- trickle-resistor-ohms = <250>;
- reg = <0x68>;
- };
diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
index d1a820e25cb9..2eacc17a9b8d 100644
--- a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt
@@ -26,6 +26,11 @@ Optional properties:
- clock-output-names: From common clock binding to override the default output
clock name
- wakeup-source: Enables wake up of host system on alarm
+- trickle-resistor-ohms : Selected resistor for trickle charger
+ Values usable for ds1339 are 250, 2000, 4000
+ Should be given if trickle charger should be enabled
+- trickle-diode-disable : Do not use internal trickle charger diode
+ Should be given if internal trickle charger diode should be disabled
Example:
rtc1: ds1339@68 {
@@ -33,5 +38,6 @@ Example:
reg = <0x68>;
interrupt-parent = <&gpio4>;
interrupts = <20 0>;
+ trickle-resistor-ohms = <250>;
};
--
2.14.1
