The SoCs after H3 has newer thermal sensor ADCs, which have two clock
inputs (bus clock and sampling clock) and a reset. The registers are
also re-arranged.
This commit reworks the code, adds the process of the clocks and
resets, and allows the sampling start/end code and the position of value
readout register to be altered.
Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
drivers/iio/adc/sun4i-gpadc-iio.c | 123 +++++++++++++++++++++++++++++++++++---
1 file changed, 116 insertions(+), 7 deletions(-)
diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c
b/drivers/iio/adc/sun4i-gpadc-iio.c
index 68926b986cd0..97845982d050 100644
--- a/drivers/iio/adc/sun4i-gpadc-iio.c
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -22,6 +22,7 @@
* shutdown for not being used.
*/
+#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -31,6 +32,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
+#include <linux/reset.h>
#include <linux/thermal.h>
#include <linux/delay.h>
@@ -49,6 +51,15 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int
chan)
return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
}
+struct sun4i_gpadc_iio;
+
+/*
+ * Prototypes for these functions, which enable these functions to be
+ * referenced in gpadc_data structures.
+ */
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
+
struct gpadc_data {
int temp_offset;
int temp_scale;
@@ -56,6 +67,12 @@ struct gpadc_data {
unsigned int tp_adc_select;
unsigned int (*adc_chan_select)(unsigned int chan);
unsigned int adc_chan_mask;
+ unsigned int temp_data;
+ int (*sample_start)(struct sun4i_gpadc_iio *info);
+ int (*sample_end)(struct sun4i_gpadc_iio *info);
+ bool has_bus_clk;
+ bool has_bus_rst;
+ bool has_mod_clk;
};
static const struct gpadc_data sun4i_gpadc_data = {
@@ -65,6 +82,9 @@ static const struct gpadc_data sun4i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun5i_gpadc_data = {
@@ -74,6 +94,9 @@ static const struct gpadc_data sun5i_gpadc_data = {
.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun4i_gpadc_chan_select,
.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun6i_gpadc_data = {
@@ -83,12 +106,18 @@ static const struct gpadc_data sun6i_gpadc_data = {
.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
.adc_chan_select = &sun6i_gpadc_chan_select,
.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
static const struct gpadc_data sun8i_a33_gpadc_data = {
.temp_offset = -1662,
.temp_scale = 162,
.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
+ .temp_data = SUN4I_GPADC_TEMP_DATA,
+ .sample_start = sun4i_gpadc_sample_start,
+ .sample_end = sun4i_gpadc_sample_end,
};
struct sun4i_gpadc_iio {
@@ -103,6 +132,9 @@ struct sun4i_gpadc_iio {
atomic_t ignore_temp_data_irq;
const struct gpadc_data *data;
bool no_irq;
+ struct clk *bus_clk;
+ struct clk *mod_clk;
+ struct reset_control *reset;
/* prevents concurrent reads of temperature and ADC */
struct mutex mutex;
struct thermal_zone_device *tzd;
@@ -277,7 +309,7 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev,
int *val)
if (info->no_irq) {
pm_runtime_get_sync(indio_dev->dev.parent);
- regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
+ regmap_read(info->regmap, info->data->temp_data, val);
pm_runtime_mark_last_busy(indio_dev->dev.parent);
pm_runtime_put_autosuspend(indio_dev->dev.parent);
@@ -383,10 +415,8 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int
irq, void *dev_id)
return IRQ_HANDLED;
}
-static int sun4i_gpadc_runtime_suspend(struct device *dev)
+static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
{
- struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
-
/* Disable the ADC on IP */
regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
/* Disable temperature sensor on IP */
@@ -395,10 +425,15 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
return 0;
}
-static int sun4i_gpadc_runtime_resume(struct device *dev)
+static int sun4i_gpadc_runtime_suspend(struct device *dev)
{
struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+ return info->data->sample_end(info);
+}
+
+static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
+{
/* clkin = 6MHz */
regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
@@ -416,6 +451,13 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
return 0;
}
+static int sun4i_gpadc_runtime_resume(struct device *dev)
+{
+ struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+
+ return info->data->sample_start(info);
+}
+
static int sun4i_gpadc_get_temp(void *data, int *temp)
{
struct sun4i_gpadc_iio *info = data;
@@ -529,17 +571,75 @@ static int sun4i_gpadc_probe_dt(struct platform_device
*pdev,
return ret;
}
+ if (info->data->has_bus_rst) {
+ info->reset = devm_reset_control_get(&pdev->dev, NULL);
+ if (IS_ERR(info->reset)) {
+ ret = PTR_ERR(info->reset);
+ return ret;
+ }
+
+ ret = reset_control_deassert(info->reset);
+ if (ret)
+ return ret;
+ }
+
+ if (info->data->has_bus_clk) {
+ info->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(info->bus_clk)) {
+ ret = PTR_ERR(info->bus_clk);
+ goto assert_reset;
+ }
+
+ ret = clk_prepare_enable(info->bus_clk);
+ if (ret)
+ goto assert_reset;
+ }
+
+ if (info->data->has_mod_clk) {
+ info->mod_clk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(info->mod_clk)) {
+ ret = PTR_ERR(info->mod_clk);
+ goto disable_bus_clk;
+ }
+
+ /* Running at 6MHz */
+ ret = clk_set_rate(info->mod_clk, 6000000);
+ if (ret)
+ goto disable_bus_clk;
+
+ ret = clk_prepare_enable(info->mod_clk);
+ if (ret)
+ goto disable_bus_clk;
+ }
+
if (!IS_ENABLED(CONFIG_THERMAL_OF))
return 0;
info->sensor_device = &pdev->dev;
info->tzd = thermal_zone_of_sensor_register(info->sensor_device, 0,
info, &sun4i_ts_tz_ops);
- if (IS_ERR(info->tzd))
+ if (IS_ERR(info->tzd)) {
dev_err(&pdev->dev, "could not register thermal sensor: %ld\n",
PTR_ERR(info->tzd));
+ ret = PTR_ERR(info->tzd);
+ goto disable_mod_clk;
+ }
+
+ return 0;
+
+disable_mod_clk:
+ if (info->data->has_mod_clk)
+ clk_disable_unprepare(info->mod_clk);
+
+disable_bus_clk:
+ if (info->data->has_bus_clk)
+ clk_disable_unprepare(info->bus_clk);
- return PTR_ERR_OR_ZERO(info->tzd);
+assert_reset:
+ if (info->data->has_bus_rst)
+ reset_control_assert(info->reset);
+
+ return ret;
}
static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
@@ -698,6 +798,15 @@ static int sun4i_gpadc_remove(struct platform_device *pdev)
if (!info->no_irq)
iio_map_array_unregister(indio_dev);
+ if (info->data->has_mod_clk)
+ clk_disable_unprepare(info->mod_clk);
+
+ if (info->data->has_bus_clk)
+ clk_disable_unprepare(info->bus_clk);
+
+ if (info->data->has_bus_rst)
+ reset_control_assert(info->reset);
+
return 0;
}
--
2.13.5
