Currently the SoC network interface (called master) to which a switch fabric hangs, has its dsa_ptr pointing to a dsa_switch_tree instance.
This is not quite correct, because this interface is physically wired to one of the switch ports (called CPU port), and because in a switch fabric with multiple CPU ports, several master interfaces will point to several CPU ports of the same dsa_switch_tree. This patchset adds a new dsa_master structure to represent the pipe between the SoC master interface and its switch CPU port. This structure will store specific data such as the master ethtool_ops copy and the tagging protocol used to pass frames with the associated slave ports. The dsa_ptr is changed to a dsa_master instance, and each DSA slave now has a pointer to a master port. This is a step forward better control over the CPU conduit and support for multiple CPU ports. Vivien Didelot (4): net: dsa: introduce dsa_master net: dsa: move master ethtool ops in dsa_master net: dsa: change dsa_ptr for a dsa_master net: dsa: assign a master to slave ports drivers/net/dsa/b53/b53_common.c | 4 +- drivers/net/dsa/bcm_sf2.c | 8 +-- drivers/net/dsa/mt7530.c | 4 +- drivers/net/dsa/mv88e6060.c | 2 +- drivers/net/dsa/qca8k.c | 2 +- include/linux/netdevice.h | 4 +- include/net/dsa.h | 42 +++++------ net/dsa/Makefile | 2 +- net/dsa/dsa.c | 34 +-------- net/dsa/dsa2.c | 38 +++++----- net/dsa/dsa_priv.h | 24 +++---- net/dsa/legacy.c | 34 +++++---- net/dsa/master.c | 149 +++++++++++++++++++++++++++++++++++++++ net/dsa/slave.c | 117 +++++------------------------- net/dsa/tag_brcm.c | 5 +- net/dsa/tag_dsa.c | 3 +- net/dsa/tag_edsa.c | 3 +- net/dsa/tag_ksz.c | 5 +- net/dsa/tag_lan9303.c | 6 +- net/dsa/tag_mtk.c | 12 +--- net/dsa/tag_qca.c | 12 +--- net/dsa/tag_trailer.c | 5 +- 22 files changed, 265 insertions(+), 250 deletions(-) create mode 100644 net/dsa/master.c -- 2.14.1