[PATCH 5/7] ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Nanopi M1

[Philipp Rossak]

From: Philipp Rossak <embe...@gmail.com>

The dwmac-sun8i hardware is present on the Nanopi M1.
It uses the internal PHY.

Signed-off-by: Philipp Rossak <embe...@gmail.com>
---
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts 
b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index 3a2ccdb..c77fbca 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -45,6 +45,10 @@
 / {
        model = "FriendlyArm NanoPi M1";
        compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+       aliases {
+               ethernet0 = &emac;
+       };
 };
 
 &ehci1 {
@@ -55,6 +59,13 @@
        status = "okay";
 };
 
+&emac {
+       phy-handle = <&int_mii_phy>;
+       phy-mode = "mii";
+       allwinner,leds-active-low;
+       status = "okay";
+};
+
 &ir {
        pinctrl-names = "default";
        pinctrl-0 = <&ir_pins_a>;
-- 
2.7.4