I can not mount an cd in either my cdrom or cdrw drives. Both are ide drives using scsi-ide emulation. During the mount the logs show: Nov 23 10:03:27 hindleyhome kernel: VFS: Disk change detected on device sr(11,0) Nov 23 10:03:29 hindleyhome kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Nov 23 10:03:29 hindleyhome kernel: ISO 9660 Extensions: RRIP_1991A Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0 Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0 Nov 23 10:05:38 hindleyhome kernel: MSDOS: Hardware sector size is 2048 Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0 Nov 23 10:05:38 hindleyhome kernel: FAT bread failed Nov 23 10:05:38 hindleyhome kernel: MSDOS: Hardware sector size is 2048 Nov 23 10:05:38 hindleyhome kernel: I/O error: dev 0b:00, sector 0 Nov 23 10:05:38 hindleyhome kernel: FAT bread failed The boot logs are: Nov 23 09:00:48 hindleyhome kernel: Linux version 2.4.0-test11 (root@HindleyHome) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #59 Thu Nov 23 08:54:15 GMT 2000 (...) Nov 23 09:00:48 hindleyhome kernel: ide-cd: passing drive hdc to ide-scsi emulation. Nov 23 09:00:48 hindleyhome kernel: ide-cd: passing drive hdd to ide-scsi emulation. (...) Nov 23 09:00:48 hindleyhome kernel: SCSI subsystem driver Revision: 1.00 Nov 23 09:00:48 hindleyhome kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Nov 23 09:00:48 hindleyhome kernel: Vendor: YAMAHA Model: CRW4416E Rev: 1.0h Nov 23 09:00:48 hindleyhome kernel: Type: CD-ROM ANSI SCSI revision: 02 Nov 23 09:00:48 hindleyhome kernel: Vendor: PIONEER Model: CD-ROM DR-A24X Rev: 1.04 Nov 23 09:00:48 hindleyhome kernel: Type: CD-ROM ANSI SCSI revision: 02 Nov 23 09:00:48 hindleyhome kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Nov 23 09:00:48 hindleyhome kernel: Detected scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 Nov 23 09:00:48 hindleyhome kernel: sr0: scsi3-mmc drive: 6x/6x writer cd/rw xa/form2 cdda tray Nov 23 09:00:48 hindleyhome kernel: Uniform CD-ROM driver Revision: 3.11 Nov 23 09:00:48 hindleyhome kernel: sr1: scsi3-mmc drive: 20x/20x xa/form2 cdda tray I have now reverted to test10 with the same setup and all works fine. Hope that is useful Mark - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/
