On Tue, Aug 22, 2017 at 02:43:11PM +0300, Stefan Mavrodiev wrote:
> From revision J the board uses new phy chip LAN8710. Compared
> with RTL8201, RA17 pin is TXERR. It has pullup which causes phy
> not to work. To fix this, PA17 must be configured output-low.
>
> This patch is compatible with earlier board revisions, since this
> pin wasn't connected to phy.
>
> Signed-off-by: Stefan Mavrodiev <ste...@olimex.com>
>
> ---
> arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> index 0b7403e4d687..578c761b551a 100644
> --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
> @@ -102,7 +102,7 @@
>
> &gmac {
> pinctrl-names = "default";
> - pinctrl-0 = <&gmac_pins_mii_a>;
> + pinctrl-0 = <&gmac_pins_mii_a>,<&gmac_txerr_pin>;
> phy = <&phy1>;
> phy-mode = "mii";
> status = "okay";
> @@ -229,6 +229,11 @@
> };
>
> &pio {
> + gmac_txerr_pin: gmac_txerr_pin@0 {
> + pins = "PA17";
> + function = "gpio_out"
> + };
> +You're not enforcing any level doing this. If you're using that pin as TXERR, why not mux it to the gmac function and let the GMAC control it? Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
signature.asc
Description: PGP signature
