Asus ROG G752xx laptops have hardware buttons. Currently only the left button 
works if a finger touches the pad which is not very convenient.

I couldn't find a clear pattern based on ic type and product id to determine if 
the device has hardware buttons or if it is a clickpad as it is vendor 
dependant. So I chose to base the patch on dmi as I couldn't find any other 
laptop based on elan i2c and having hardware buttons.

Signed-off-by: Maxime Bellengé <maxime.belle...@gmail.com>
---
 drivers/input/mouse/elan_i2c_core.c | 40 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/input/mouse/elan_i2c_core.c 
b/drivers/input/mouse/elan_i2c_core.c
index 3b616cb7c67f..fa417105898f 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -37,6 +37,7 @@
 #include <linux/of.h>
 #include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>
+#include <linux/dmi.h>
 
 #include "elan_i2c.h"
 
@@ -923,6 +924,7 @@ static void elan_report_absolute(struct elan_tp_data *data, 
u8 *packet)
        }
 
        input_report_key(input, BTN_LEFT, tp_info & 0x01);
+        input_report_key(input, BTN_RIGHT, tp_info & 0x02);
        input_report_abs(input, ABS_DISTANCE, hover_event != 0);
        input_mt_report_pointer_emulation(input, true);
        input_sync(input);
@@ -960,6 +962,39 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
 }
 
 /*
+ * Asus ROG G752xx have hardware buttons
+ */
+ static const struct dmi_system_id elan_dmi_has_hw_buttons[] = {
+ #if defined(CONFIG_DMI) && defined(CONFIG_X86)
+       {
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "G752VT"),
+               },
+       },
+       {
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "G752VS"),
+               },
+       },
+        {
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "G752VY"),
+               },
+       },
+        {
+               .matches = {
+                       DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+                       DMI_MATCH(DMI_PRODUCT_NAME, "G752VL"),
+               },
+       },
+ #endif
+       { }
+ };
+
+/*
  ******************************************************************
  * Elan initialization functions
  ******************************************************************
@@ -991,7 +1026,10 @@ static int elan_setup_input_device(struct elan_tp_data 
*data)
 
        __set_bit(EV_ABS, input->evbit);
        __set_bit(INPUT_PROP_POINTER, input->propbit);
-       __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
+        if (dmi_check_system(elan_dmi_has_hw_buttons)) {
+                __set_bit(BTN_RIGHT, input->keybit);
+        } else
+              __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
        __set_bit(BTN_LEFT, input->keybit);
 
        /* Set up ST parameters */
-- 
2.13.5

Reply via email to