< Linux version 2.6.20-1.2933.fc6 < ([EMAIL PROTECTED]) (gcc version 4.1.1 20070105 < (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007 --- > Linux version 2.6.20-1.3023.fc7 > ([EMAIL PROTECTED]) (gcc version 4.1.2 20070317 > (Red Hat 4.1.2-5)) #1 SMP Sun Mar 25 22:12:02 EDT 2007
I agree that the fc7 version string looks strange, because there are other things in the fc7 dmesg which are clearly from 2.6.21, such as this: < ACPI: Core revision 20060707 --- > ACPI: Core revision 20070126 Perhaps you can try building a kernel.org 2.6.21 kernel and running it on your FC6 install? The ALI15X3 stuff exists only in the working FC6 dmesg: < Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 < ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx < ALI15X3: IDE controller at PCI slot 0000:00:0f.0 < ACPI: Unable to derive IRQ for device 0000:00:0f.0 < ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI < ALI15X3: chipset revision 195 < ALI15X3: not 100% native mode: will probe irqs later < ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio < ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio < Probing IDE interface ide0... < hda: HITACHI_DK23CA-20, ATA DISK drive < ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 < Probing IDE interface ide1... < hdc: MATSHITADVD-ROM SR-8175, ATAPI CD/DVD-ROM drive < ide1 at 0x170-0x177,0x376 on irq 15 < Probing IDE interface ide2... < Probing IDE interface ide3... < Probing IDE interface ide4... < Probing IDE interface ide5... < hda: max request size: 128KiB < hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(66) < hda: cache flushes not supported < hda: hda1 hda2 < ide-floppy driver 0.99.newide FC7 looks like it is using libata instead: -Len > SCSI subsystem initialized > libata version 2.20 loaded. > ACPI: Unable to derive IRQ for device 0000:00:0f.0 > ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI > ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 > irq 14 > ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 > irq 15 > scsi0 : pata_ali > PM: Adding info for No Bus:host0 > ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 <======== > drive can do 100 > ata1.00: 39070080 sectors, multi 16: LBA > ata1.00: configured for UDMA/33 <=============== configured as 33 > scsi1 : pata_ali > PM: Adding info for No Bus:host1 > ata2.00: ATAPI, max UDMA/33 <=== cd can't be read now > ata2.00: configured for UDMA/33 > PM: Adding info for No Bus:target0:0:0 > scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-2 00H1 PQ: 0 ANSI: 5 > PM: Adding info for scsi:0:0:0:0 > PM: Adding info for No Bus:target1:0:0 > ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen > ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > ata2: soft resetting port > ATA: abnormal status 0xD0 on port 0x00010177 > ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) > ata2.00: revalidation failed (errno=-5) > ata2: failed to recover some devices, retrying in 5 secs > ata2: port is slow to respond, please be patient (Status 0xd0) > ata2: port failed to respond (30 secs, Status 0xd0) > ata2: soft resetting port > ATA: abnormal status 0xD0 on port 0x00010177 > ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) > ata2.00: revalidation failed (errno=-5) > ata2.00: limiting speed to UDMA/33:PIO3 > ata2: failed to recover some devices, retrying in 5 secs > ata2: port is slow to respond, please be patient (Status 0xd0) > ata2: port failed to respond (30 secs, Status 0xd0) > ata2: soft resetting port > ATA: abnormal status 0xD0 on port 0x00010177 > ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) > ata2.00: revalidation failed (errno=-5) > ata2.00: disabled > ata2: EH complete - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
