On Tue, Jul 18, 2017 at 5:53 PM, Lee Jones <lee.jo...@linaro.org> wrote: > On Tue, 18 Jul 2017, Chen-Yu Tsai wrote: > >> On Tue, Jul 18, 2017 at 3:25 PM, Quentin Schulz >> <quentin.sch...@free-electrons.com> wrote: >> > Hi Lee, >> > >> > On 18/07/2017 09:18, Lee Jones wrote: >> >> On Mon, 17 Jul 2017, Quentin Schulz wrote: >> >> >> >>> Hi all, >> >>> >> >>> On 17/07/2017 11:53, Quentin Schulz wrote: >> >>>> According to their datasheets, the AXP221, AXP223, AXP288, AXP803, >> >>>> AXP809 and AXP813 PEK have different values for startup time bits from >> >>>> the AXP20X PEK (which are currently used for all the aforementioned >> >>>> PMICs). >> >>>> >> >>>> This patch series adds support for platform_device_id to axp20x-pek >> >>>> driver >> >>>> to support different startup time bits depending on PMIC's variant and >> >>>> set >> >>>> the correct platform_device_id in the mfd. >> >>>> >> >>>> This has been tested on AXP813. To perform the test, modify the value of >> >>>> startup and/or shutdown of the pek in sysfs. Press the button soldered >> >>>> to >> >>>> PEK input of the AXP the amount of time you set in sysfs. The PMIC shuts >> >>>> down the board without needing to unplug any power supply. Press PEK >> >>>> button >> >>>> the amount of time you set in sysfs for startup and the PMIC will start >> >>>> the >> >>>> board. Note that the time bits are obivoulsy hardware reset to their >> >>>> default when you unplug all power supplies from the board. >> >>>> >> >>> >> >>> I forgot to add that it depends on this patch series (particularly the >> >>> third patch (3/6) "mfd: axp20x: Add support for AXP813 PMIC") from >> >>> Chen-Yu: >> >>> https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1428284.html >> >> >> >> So you are going to re-send? >> >> >> > >> > You put your acked-by just yesterday on this patch. Do I need to resend >> > it anyway? >> > >> > The link I provided seems to be really slow/not working today, so I give >> > you another one for reference: https://patchwork.kernel.org/patch/9803439/ >> >> Or rather, would you like me to merge the AXP813 changes into my next >> version, and you resend the rest for faster separate inclusion? > > What I'd really like is for one of you to collect up the patches which > depend on each other (in the correct order of course), along with the > Acks you've obtained and send as a single set. That way, I am less > likely to mess up the ordering when applying.
I'll include the mfd patch in my axp813 series. Quentin, please send only the input driver for v2. ChenYu > >> >>>> Quentin Schulz (2): >> >>>> Input: axp20x-pek: add support for AXP221 PEK >> >>>> mfd: axp20x: use correct platform device id for many PEK >> >>>> >> >>>> drivers/input/misc/axp20x-pek.c | 62 >> >>>> ++++++++++++++++++++++++++++++++++------- >> >>>> drivers/mfd/axp20x.c | 12 ++++---- >> >>>> 2 files changed, 58 insertions(+), 16 deletions(-) >> >>>> >> >>> >> >> >> > > > -- > Lee Jones > Linaro STMicroelectronics Landing Team Lead > Linaro.org │ Open source software for ARM SoCs > Follow Linaro: Facebook | Twitter | Blog
