Max Kellermann wrote:
Yet another hard drive which doesn't seem to get NCQ right.
ata1: EH in ADMA mode, notifier 0x0 notifier_error 0x0 gen_ctl
0x1501000 status 0x400 next cpb count 0xB next cpb idx 0x0
[...]
ata1: timeout waiting for ADMA IDLE, stat=0x400
ata1: timeout waiting for ADMA LEGACY, stat=0x400
ata1.00: exception Emask 0x0 SAct 0x3fff SErr 0x200000 action 0x2
frozen
[...]
ata1: soft resetting port
Don't know if I noticed this before, but the controller seems to be
reporting an SError, looks like a link layer CRC error. This could be a
potential symptom of the drive and controller just not getting along,
but you might want to try a different SATA cable as well.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [EMAIL PROTECTED]
Home Page: http://www.roberthancock.com/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
