* Nick Piggin <[EMAIL PROTECTED]> wrote:
> > > 535.43user 30.62system 2:23.72elapsed 393%CPU
> >
> > Thanks for testing this! Could you please try this also with:
> >
> > echo 100000000 > /proc/sys/kernel/sched_granularity
>
> 507.68user 31.87system 2:18.05elapsed 390%CPU
> 507.99user 31.93system 2:18.09elapsed 390%CPU
> > could you maybe even try a more extreme setting of:
> >
> > echo 500000000 > /proc/sys/kernel/sched_granularity
> 506.69user 31.96system 2:17.82elapsed 390%CPU
> 505.70user 31.84system 2:17.90elapsed 389%CPU
> Again, for comparison 2.6.21-rc7 mainline:
>
> 508.87user 32.47system 2:17.82elapsed 392%CPU
> 509.05user 32.25system 2:17.84elapsed 392%CPU
thanks for testing this!
> So looking at elapsed time, a granularity of 100ms is just behind the
> mainline score. However it is using slightly less user time and
> slightly more idle time, which indicates that balancing might have got
> a bit less aggressive.
>
> But anyway, it conclusively shows the efficiency impact of such tiny
> timeslices.
yeah, the 4% drop in a CPU-cache-sensitive workload like kernbench is
not unexpected when going to really frequent preemption. Clearly, the
default preemption granularity needs to be tuned up.
I think you said you measured ~3msec average preemption rate per CPU?
That would suggest the average cache-trashing cost was 120 usecs per
every 3 msec window. Taking that as a ballpark figure, to get the
difference back into the noise range we'd have to either use ~5 msec:
echo 5000000 > /proc/sys/kernel/sched_granularity
or 15 msec:
echo 15000000 > /proc/sys/kernel/sched_granularity
(depending on whether it's 5x 3msec or 5x 1msec - i'm still not sure i
correctly understood your 3msec value. I'd have to know your kernbench
workload's approximate 'steady state' context-switch rate to do a more
accurate calculation.)
Ingo
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
