4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiahau Chang <jia...@gmail.com>
commit dec08194ffeccfa1cf085906b53d301930eae18f upstream.
For AMD Promontory xHCI host, although you can disable USB 2.0 ports in
BIOS settings, those ports will be enabled anyway after you remove a
device on that port and re-plug it in again. It's a known limitation of
the chip. As a workaround we can clear the PORT_WAKE_BITS.
This will disable wake on connect, disconnect and overcurrent on
AMD Promontory USB2 ports
[checkpatch cleanup and commit message reword -Mathias]
Cc: Tsai Nicholas <nicholas.t...@amd.com>
Signed-off-by: Jiahau Chang <lars_ch...@asmedia.com.tw>
Signed-off-by: Mathias Nyman <mathias.ny...@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/usb/host/xhci-hub.c | 3 +++
drivers/usb/host/xhci-pci.c | 12 ++++++++++++
drivers/usb/host/xhci.h | 1 +
3 files changed, 16 insertions(+)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1348,6 +1348,9 @@ int xhci_bus_suspend(struct usb_hcd *hcd
t2 |= PORT_WKOC_E | PORT_WKCONN_E;
t2 &= ~PORT_WKDISC_E;
}
+ if ((xhci->quirks & XHCI_U2_DISABLE_WAKE) &&
+ (hcd->speed < HCD_USB3))
+ t2 &= ~PORT_WAKE_BITS;
} else
t2 &= ~PORT_WAKE_BITS;
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -54,6 +54,11 @@
#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_4 0x43b9
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_3 0x43ba
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb
+#define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc
+
static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
@@ -135,6 +140,13 @@ static void xhci_pci_quirks(struct devic
if (pdev->vendor == PCI_VENDOR_ID_AMD)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
+ ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
+ (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
+ (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
+ (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
+ xhci->quirks |= XHCI_U2_DISABLE_WAKE;
+
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_INTEL_HOST;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1660,6 +1660,7 @@ struct xhci_hcd {
/* For controller with a broken Port Disable implementation */
#define XHCI_BROKEN_PORT_PED (1 << 25)
#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
+#define XHCI_U2_DISABLE_WAKE (1 << 27)
unsigned int num_active_eps;
unsigned int limit_active_eps;
