early console in setup code
[    0.000000] Linux version 4.12.0-06091-ga99d848 (kbuild@athens) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #3 SMP PREEMPT Fri Jul 7 14:49:58 CST 2017
[    0.000000] Command line: ip=::::vm-lkp-nex04-yocto-x86_64-13::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-13/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-a99d848d3bc6586e922584ce8ec673a451a09cf1-20170709-60775-1hfnzzt-0.yaml ARCH=x86_64 kconfig=x86_64-acpi-redef branch=linux-devel/devel-spot-201707090554 commit=a99d848d3bc6586e922584ce8ec673a451a09cf1 BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-6/a99d848d3bc6586e922584ce8ec673a451a09cf1/vmlinuz-4.12.0-06091-ga99d848 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-nex04-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-acpi-redef/gcc-6/a99d848d3bc6586e922584ce8ec673a451a09cf1/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 cons
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffde max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b90-0x000f6b9f] mapped at [ffff8ab8800f6b90]
[    0.000000]   mpc: f6ba0-f6c78
[    0.000000] Base memory trampoline at [ffff8ab880099000] 99000 size 24576
[    0.000000] BRK [0x1d49d000, 0x1d49dfff] PGTABLE
[    0.000000] BRK [0x1d49e000, 0x1d49efff] PGTABLE
[    0.000000] BRK [0x1d49f000, 0x1d49ffff] PGTABLE
[    0.000000] BRK [0x1d4a0000, 0x1d4a0fff] PGTABLE
[    0.000000] BRK [0x1d4a1000, 0x1d4a1fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1faae000-0x1ffcffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69B0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ffdd001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 1688063817 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffddfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000] On node 0 totalpages: 130940
[    0.000000]   DMA32 zone: 2048 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 130940 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 482 pages/cpu @ffff8ab89f800000 s1945368 r0 d28904 u2097152
[    0.000000] pcpu-alloc: s1945368 r0 d28904 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1f80d880
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128871
[    0.000000] Kernel command line: ip=::::vm-lkp-nex04-yocto-x86_64-13::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-13/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-a99d848d3bc6586e922584ce8ec673a451a09cf1-20170709-60775-1hfnzzt-0.yaml ARCH=x86_64 kconfig=x86_64-acpi-redef branch=linux-devel/devel-spot-201707090554 commit=a99d848d3bc6586e922584ce8ec673a451a09cf1 BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-6/a99d848d3bc6586e922584ce8ec673a451a09cf1/vmlinuz-4.12.0-06091-ga99d848 max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-lkp-nex04-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-acpi-redef/gcc-6/a99d848d3bc6586e922584ce8ec673a451a09cf1/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,1152
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 469952K/523760K available (13284K kernel code, 1506K rwdata, 5820K rodata, 2976K init, 12332K bss, 53808K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.004000] Preemptible hierarchical RCU implementation.
[    0.004000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.004000] 	RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[    0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.004000] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[    0.004000] console [ttyS0] enabled
[    0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.004000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.004000] ... MAX_LOCK_DEPTH:          48
[    0.004000] ... MAX_LOCKDEP_KEYS:        8191
[    0.004000] ... CLASSHASH_SIZE:          4096
[    0.004000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.004000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.004000] ... CHAINHASH_SIZE:          32768
[    0.004000]  memory used by lock dependency info: 8639 kB
[    0.004000]  per task-struct memory footprint: 2688 bytes
[    0.004000] ODEBUG: selftest passed
[    0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.004000] hpet clockevent registered
[    0.004019] tsc: Detected 2261.000 MHz processor
[    0.004715] Calibrating delay loop (skipped) preset value.. 4522.00 BogoMIPS (lpj=9044000)
[    0.005073] pid_max: default: 32768 minimum: 301
[    0.005739] ACPI: Core revision 20170531
[    0.011096] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.012102] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.013045] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.014530] CPU: Physical Processor ID: 0
[    0.015105] mce: CPU supports 10 MCE banks
[    0.015787] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.016008] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.028875] Freeing SMP alternatives memory: 44K
[    0.030869] smpboot: Max logical packages: 1
[    0.031510] enabled ExtINT on CPU#0
[    0.032883] ENABLING IO-APIC IRQs
[    0.033402] init IO_APIC IRQs
[    0.033934]  apic 0 pin 0 not connected
[    0.034513] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.035594] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.036000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.036000]  apic 0 pin 16 not connected
[    0.036000]  apic 0 pin 17 not connected
[    0.036000]  apic 0 pin 18 not connected
[    0.036000]  apic 0 pin 19 not connected
[    0.036000]  apic 0 pin 20 not connected
[    0.036000]  apic 0 pin 21 not connected
[    0.036000]  apic 0 pin 22 not connected
[    0.036000]  apic 0 pin 23 not connected
[    0.036000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.036000] Using local APIC timer interrupts.
[    0.036000] calibrating APIC timer ...
[    0.036000] ... lapic delta = 6249747
[    0.036000] ... PM-Timer delta = 357952
[    0.036000] ... PM-Timer result ok
[    0.036000] ..... delta 6249747
[    0.036000] ..... mult: 268424589
[    0.036000] ..... calibration result: 3999838
[    0.036000] ..... CPU clock speed is 2260.3926 MHz.
[    0.036000] ..... host bus clock speed is 999.3838 MHz.
[    0.036062] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.052030] Performance Events: PMU not available due to virtualization, using software events only.
[    0.068016] Hierarchical SRCU implementation.
[    0.092014] smp: Bringing up secondary CPUs ...
[    0.092698] smp: Brought up 1 node, 1 CPU
[    0.093314] smpboot: Total of 1 processors activated (4522.00 BogoMIPS)
[    0.094793] devtmpfs: initialized
[    0.098781] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.100012] futex hash table entries: 256 (order: 3, 32768 bytes)
[    0.100927] xor: measuring software checksum speed
[    0.140006]    prefetch64-sse: 10838.000 MB/sec
[    0.180007]    generic_sse:  7714.000 MB/sec
[    0.180587] xor: using function: prefetch64-sse (10838.000 MB/sec)
[    0.182223] NET: Registered protocol family 16
[    0.188051] cpuidle: using governor ladder
[    0.188605] PCCT header not found.
[    0.190370] ACPI: bus type PCI registered
[    0.191015] PCI: Using configuration type 1 for base access
[    0.216207] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.296032] raid6: sse2x1   gen()  5034 MB/s
[    0.364024] raid6: sse2x1   xor()  4096 MB/s
[    0.432011] raid6: sse2x2   gen()  6350 MB/s
[    0.500012] raid6: sse2x2   xor()  2943 MB/s
[    0.568011] raid6: sse2x4   gen()  7339 MB/s
[    0.636011] raid6: sse2x4   xor()  4125 MB/s
[    0.636578] raid6: using algorithm sse2x4 gen() 7339 MB/s
[    0.637242] raid6: .... xor() 4125 MB/s, rmw enabled
[    0.637896] raid6: using intx1 recovery algorithm
[    0.638731] ACPI: Added _OSI(Module Device)
[    0.639254] ACPI: Added _OSI(Processor Device)
[    0.639810] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.640006] ACPI: Added _OSI(Processor Aggregator Device)
[    0.644740] ACPI: Interpreter enabled
[    0.645242] ACPI: (supports S0 S5)
[    0.645670] ACPI: Using IOAPIC for interrupt routing
[    0.648055] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.660809] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.661592] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    0.662306] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.664135] PCI host bridge to bus 0000:00
[    0.664662] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.665490] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.666313] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.667255] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.668007] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.668740] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.670208] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.671766] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.678810] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.682193] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.684007] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.684819] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.685691] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.686910] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.688090] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.689032] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.690379] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.693977] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.701836] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.716020] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.720030] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.723517] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.726052] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.737433] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.740576] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.744006] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.748006] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.758835] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    0.764964] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.766787] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    0.775745] pci_bus 0000:00: on NUMA node 0
[    0.777315] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.778317] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.779371] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.780239] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.781121] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.782131] ACPI: Enabled 3 GPEs in block 00 to 0F
[    0.784397] SCSI subsystem initialized
[    0.788049] libata version 3.00 loaded.
[    0.788631] ACPI: bus type USB registered
[    0.789209] usbcore: registered new interface driver usbfs
[    0.789939] usbcore: registered new interface driver hub
[    0.790656] usbcore: registered new device driver usb
[    0.791363] Linux video capture interface: v2.00
[    0.792052] pps_core: LinuxPPS API ver. 1 registered
[    0.792718] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.793879] PTP clock support registered
[    0.794436] EDAC MC: Ver: 3.0.0
[    0.795071] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[    0.796070] wmi: Mapper loaded
[    0.800085] Advanced Linux Sound Architecture Driver Initialized.
[    0.800920] PCI: Using ACPI for IRQ routing
[    0.801450] PCI: pci_cache_line_size set to 64 bytes
[    0.802228] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.803009] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[    0.809513] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.810484] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.811129] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.816131] clocksource: Switched to clocksource kvm-clock
[    0.817060] pnp: PnP ACPI init
[    0.817656] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.818638] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.819644] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.820427] pnp 00:03: [dma 2]
[    0.820924] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.821956] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.822976] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.823941] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.825545] pnp: PnP ACPI: found 7 devices
[    0.831488] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.832804] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.833593] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.834346] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.835256] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    0.836374] NET: Registered protocol family 2
[    0.837410] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.838372] TCP bind hash table entries: 4096 (order: 6, 327680 bytes)
[    0.839571] TCP: Hash tables configured (established 4096 bind 4096)
[    0.840476] UDP hash table entries: 256 (order: 3, 49152 bytes)
[    0.841945] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes)
[    0.842965] NET: Registered protocol family 1
[    0.852090] RPC: Registered named UNIX socket transport module.
[    0.853505] RPC: Registered udp transport module.
[    0.854485] RPC: Registered tcp transport module.
[    0.855476] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.856870] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.858214] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.859472] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.860935] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.862871] PCI: CLS 0 bytes, default 64
[    0.863953] Trying to unpack rootfs image as initramfs...
[    1.296878] Freeing initrd memory: 5256K
[    1.300337] cryptomgr_test (30) used greatest stack depth: 15112 bytes left
[    1.302259] AVX or AES-NI instructions are not detected.
[    1.302962] CPU feature 'AVX registers' is not supported.
[    1.303644] CPU feature 'AVX registers' is not supported.
[    1.304367] CPU feature 'AVX registers' is not supported.
[    1.305416] audit: initializing netlink subsys (disabled)
[    1.306453] audit: type=2000 audit(1499572947.101:1): state=initialized audit_enabled=0 res=1
[    1.307588] workingset: timestamp_bits=62 max_order=17 bucket_order=0
[    1.321158] NFS: Registering the id_resolver key type
[    1.321873] Key type id_resolver registered
[    1.322414] Key type id_legacy registered
[    1.327612] SGI XFS with security attributes, no debug enabled
[    1.333823] 9p: Installing v9fs 9p2000 file system support
[    1.335110] NILFS version 2 loaded
[    1.339062] Key type asymmetric registered
[    1.339693] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.340664] io scheduler noop registered (default)
[    1.341276] io scheduler mq-deadline registered
[    1.341856] io scheduler kyber registered
[    1.342368] start plist test
[    1.344965] end plist test
[    1.352256] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[    1.352890] crc32: self tests passed, processed 225944 bytes in 3321672 nsec
[    1.357858] crc32c: CRC_LE_BITS = 1
[    1.358298] crc32c: self tests passed, processed 225944 bytes in 2032721 nsec
[    1.541640] crc32_combine: 8373 self tests passed
[    1.724232] crc32c_combine: 8373 self tests passed
[    1.725014] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    1.727607] rivafb_setup START
[    1.728227] vmlfb: initializing
[    1.728806] usbcore: registered new interface driver udlfb
[    1.729530] usbcore: registered new interface driver smscufx
[    1.730293] intel_idle: does not run on family 6 model 6
[    1.731164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.732276] ACPI: Power Button [PWRF]
[    1.932338] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    1.979451] r3964: Philips r3964 Driver $Revision: 1.10 $
[    1.980724] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.008535] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.034278] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.035962] Initializing Nozomi driver 2.1d
[    2.036612] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    2.037511] ac.o: No PCI boards found.
[    2.037978] ac.o: For an ISA board you must supply memory and irq parameters.
[    2.039231] Non-volatile memory driver v1.3
[    2.039969] Linux agpgart interface v0.103
[    2.040666] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    2.046750] brd: module loaded
[    2.054118] mtip32xx Version 1.3.1
[    2.055011] Phantom Linux Driver, version n0.9.8, init OK
[    2.056786] usbcore: registered new interface driver viperboard
[    2.058024] Uniform Multi-Platform E-IDE driver
[    2.059279] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00)
[    2.060790] piix 0000:00:01.1: not 100% native mode: will probe irqs later
[    2.063340]     ide0: BM-DMA at 0xc080-0xc087
[    2.064373]     ide1: BM-DMA at 0xc088-0xc08f
[    2.065297] Probing IDE interface ide0...
[    2.304250] tsc: Refined TSC clocksource calibration: 2260.997 MHz
[    2.305572] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2097487cd89, max_idle_ns: 440795205734 ns
[    2.672329] Probing IDE interface ide1...
[    3.460261] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive
[    4.180438] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0
[    4.182199] hdc: MWDMA2 mode selected
[    4.183533] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.184688] ide1 at 0x170-0x177,0x376 on irq 15
[    4.187025] ide-gd driver 1.18
[    4.187929] Loading iSCSI transport class v2.0-870.
[    4.202112] fnic: Cisco FCoE HBA Driver, ver 1.6.0.34
[    4.203322] fnic: Successfully Initialized Trace Buffer
[    4.204716] fnic: Successfully Initialized FC_CTLR Trace Buffer
[    4.210665] Loading Adaptec I2O RAID: Version 2.4 Build 5go
[    4.212084] Detecting Adaptec I2O RAID controllers...
[    4.213272] Adaptec aacraid driver 1.2.1[50792]-custom
[    4.214554] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 9.00.00.00-k.
[    4.216534] csiostor: Chelsio FCoE driver 1.0.0
[    4.217712] megasas: 07.701.17.00-rc1
[    4.218577] mpt3sas version 15.100.00.00 loaded
[    4.219879] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    4.221643] ipr: IBM Power RAID SCSI Device Driver version: 2.6.4 (March 14, 2017)
[    4.223404] libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015)
[    4.225633] Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015)
[    4.227035] iscsi: registered transport (cxgb3i)
[    4.228076] Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015)
[    4.229484] iscsi: registered transport (cxgb4i)
[    4.230502] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[    4.232065] iscsi: registered transport (bnx2i)
[    4.237319] iscsi: registered transport (be2iscsi)
[    4.238391] In beiscsi_module_init, tt=ffffffffb04bd780
[    4.239945] Error: Driver 'pata_platform' is already registered, aborting...
[    4.241664] SSFDC read-only Flash Translation layer
[    4.242740] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[    4.244437] device id = 2440
[    4.245068] device id = 2480
[    4.245745] device id = 24c0
[    4.246390] device id = 24d0
[    4.247036] device id = 25a1
[    4.247714] device id = 2670
[    4.248545] slram: not enough parameters.
[    4.250037] ftl_cs: FTL header not found.
[    4.252329] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    4.259849] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[    4.262848] mdio_bus fixed-0: GPIO lookup for consumer reset
[    4.264129] mdio_bus fixed-0: using lookup tables for GPIO lookup
[    4.265503] mdio_bus fixed-0: lookup for GPIO reset failed
[    4.266830] libphy: Fixed MDIO Bus: probed
[    4.268504] Atheros(R) L2 Ethernet Driver - version 2.2.3
[    4.269726] Copyright (c) 2007 Atheros Corporation.
[    4.270979] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    4.276620] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    4.278224] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    4.498982] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[    4.877750] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    4.878624] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.879595] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    4.880340] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    4.881132] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    4.882025] igb: Copyright (c) 2007-2014 Intel Corporation.
[    4.882802] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[    4.883747] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    4.892976] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.3.66
[    4.894032] tehuti: Tehuti Networks(R) Network Driver, 7.29.3
[    4.894752] tehuti: Options: hw_csum 
[    4.895303] usbcore: registered new interface driver catc
[    4.896042] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    4.896989] usbcore: registered new interface driver pegasus
[    4.897703] usbcore: registered new interface driver ipheth
[    4.899099] aoe: AoE v85 initialised.
[    4.899677] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.900549] ohci-pci: OHCI PCI platform driver
[    4.901141] ohci-platform: OHCI generic platform driver
[    4.902051] usbcore: registered new interface driver cdc_acm
[    4.902813] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    4.903813] usbcore: registered new interface driver usblp
[    4.904717] usbcore: registered new interface driver cdc_wdm
[    4.905504] usbcore: registered new interface driver usb-storage
[    4.906389] usbcore: registered new interface driver ums-alauda
[    4.907129] usbcore: registered new interface driver ums-datafab
[    4.907899] usbcore: registered new interface driver ums-freecom
[    4.908698] usbcore: registered new interface driver ums-jumpshot
[    4.909554] usbcore: registered new interface driver ums-realtek
[    4.910755] usbcore: registered new interface driver ums-sddr55
[    4.911962] usbcore: registered new interface driver mdc800
[    4.912792] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    4.913792] usbcore: registered new interface driver cypress_cy7c63
[    4.914665] usbcore: registered new interface driver emi62 - firmware loader
[    4.916149] usbcore: registered new interface driver iowarrior
[    4.917232] usbcore: registered new interface driver usblcd
[    4.918198] usbcore: registered new interface driver rio500
[    4.919314] usbcore: registered new interface driver usbtest
[    4.920443] usbcore: registered new interface driver usbsevseg
[    4.921969] dummy_hcd dummy_hcd.0: USB Host+Gadget Emulator, driver 02 May 2005
[    4.923234] dummy_hcd dummy_hcd.0: Dummy host controller
[    4.924391] dummy_hcd dummy_hcd.0: new USB bus registered, assigned bus number 1
[    4.925848] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.927231] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.928855] usb usb1: Product: Dummy host controller
[    4.929925] usb usb1: Manufacturer: Linux 4.12.0-06091-ga99d848 dummy_hcd
[    4.930990] usb usb1: SerialNumber: dummy_hcd.0
[    4.931919] hub 1-0:1.0: USB hub found
[    4.932491] hub 1-0:1.0: 1 port detected
[    4.933643] Mass Storage Function, version: 2009/09/11
[    4.934282] LUN: removable file: (no medium)
[    4.934831] no file given for LUN0
[    4.935774] g_acm_ms dummy_udc.0: failed to start g_acm_ms: -22
[    4.936655] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    4.938559] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.939318] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.940834] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    4.942528] usbcore: registered new interface driver bcm5974
[    4.945495] usbcore: registered new interface driver synaptics_usb
[    4.946291] usbcore: registered new interface driver gtco
[    4.946994] usbcore: registered new interface driver hanwang
[    4.947809] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[    4.948643] usbcore: registered new interface driver ati_remote2
[    4.949391] cm109: Keymap for Komunikate KIP1000 phone loaded
[    4.950105] usbcore: registered new interface driver cm109
[    4.950787] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad
[    4.951841] i2c-parport-light: adapter type unspecified
[    4.953025] IR NEC protocol handler initialized
[    4.953615] IR SANYO protocol handler initialized
[    4.954191] IR Sharp protocol handler initialized
[    4.954782] IR XMP protocol handler initialized
[    4.955378] usbcore: registered new interface driver imon
[    4.956104] usbcore: registered new interface driver mceusb
[    4.956911] rc rc0: rc-core loopback device as /devices/virtual/rc/rc0
[    4.957787] Registered IR keymap rc-empty
[    4.958365] input: rc-core loopback device as /devices/virtual/rc/rc0/input4
[    4.959315] pps_ldisc: PPS line discipline registered
[    4.960094] Driver for 1-wire Dallas network protocol.
[    4.960815] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[    4.961969] applesmc: supported laptop not found!
[    4.962558] applesmc: driver init failed (ret=-19)!
[    4.963919] intel_powerclamp: CPU does not support MWAIT
[    4.963946] acquirewdt: WDT driver for Acquire single board computer initialising
[    4.966485] acquirewdt: I/O address 0x0043 already in use
[    4.967541] acquirewdt: probe of acquirewdt failed with error -5
[    4.968730] ib700wdt: WDT driver for IB700 single board computer initialising
[    4.969767] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[    4.971226] wafer5823wdt: I/O address 0x0443 already in use
[    4.972092] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.972811] sc1200wdt: build 20020303
[    4.973542] sc1200wdt: io parameter must be specified
[    4.974486] cpu5wdt: misc_register failed
[    4.975027] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[    4.977046] smsc37b787_wdt: Unable to register miscdev on minor 130
[    4.977815] machzwd: MachZ ZF-Logic Watchdog driver initializing
[    4.978552] machzwd: no ZF-Logic found
[    4.979651] ashmem: initialized
[    4.980599] acer_wmi: Acer Laptop ACPI-WMI Extras
[    4.981612] acer_wmi: No or unsupported WMI interface, unable to load
[    4.983015] fujitsu_tablet: Unknown (using defaults)
[    4.984200] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[    4.987982] usbcore: registered new interface driver snd-usb-audio
[    4.989369] usbcore: registered new interface driver snd-ua101
[    4.990624] usbcore: registered new interface driver snd-usb-us122l
[    4.991962] usbcore: registered new interface driver snd-usb-caiaq
[    4.993651] Netfilter messages via NETLINK v0.30.
[    4.994676] nfnl_acct: registering with nfnetlink.
[    4.995808] xt_time: kernel timezone is -0000
[    4.996793] ip_set: protocol 6
[    4.997496] IPVS: Registered protocols (ESP)
[    4.998438] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    4.999958] IPVS: Each connection entry needs 408 bytes at least
[    5.001393] IPVS: ipvs loaded.
[    5.002066] IPVS: [lc] scheduler registered.
[    5.002972] IPVS: [wlc] scheduler registered.
[    5.003898] IPVS: [lblc] scheduler registered.
[    5.004866] IPVS: [dh] scheduler registered.
[    5.005771] IPVS: [sed] scheduler registered.
[    5.006762] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    5.008451] Initializing XFRM netlink socket
[    5.009479] 9pnet: Installing 9P2000 support
[    5.010482] NET: Registered protocol family 37
[    5.011443] Key type dns_resolver registered
[    5.012412] Key type ceph registered
[    5.017556] libceph: loaded (mon/osd proto 15/24)
[    5.020811] ... APIC ID:      00000000 (0)
[    5.021696] ... APIC VERSION: 01050014
[    5.022521] 0000000000000000000000000000000000000000000000000000000000000000
[    5.024017] 0000000000000000000000000000000000000000000000000000000000000000
[    5.024017] 0000000000000000000000000000000000000000000000000000000000008000
[    5.027174] number of MP IRQ sources: 15.
[    5.028059] number of IO-APIC #0 registers: 24.
[    5.029043] testing the IO APIC.......................
[    5.030140] IO APIC #0......
[    5.030762] .... register #00: 00000000
[    5.031576] .......    : physical APIC id: 00
[    5.032519] .......    : Delivery Type: 0
[    5.033378] .......    : LTS          : 0
[    5.034222] .... register #01: 00170011
[    5.035031] .......     : max redirection entries: 17
[    5.036340] .......     : PRQ implemented: 0
[    5.037252] .......     : IO APIC version: 11
[    5.038173] .... register #02: 00000000
[    5.039002] .......     : arbitration: 00
[    5.039847] .... IRQ redirection table:
[    5.040703] IOAPIC 0:
[    5.041211]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.042854]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    5.044540]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    5.046177]  pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[    5.047831]  pin04, enabled , edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[    5.049517]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[    5.051157]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[    5.052836]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[    5.054488]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[    5.056151]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[    5.057795]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[    5.059448]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[    5.061151]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    5.062803]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[    5.064476]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[    5.066026]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[    5.067143]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.068426]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.069547]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.070849]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.071840]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.072861]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.073848]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.074820]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    5.075819] IRQ to pin mappings:
[    5.076243] IRQ0 -> 0:2
[    5.076580] IRQ1 -> 0:1
[    5.076894] IRQ3 -> 0:3
[    5.077213] IRQ4 -> 0:4
[    5.077590] IRQ5 -> 0:5
[    5.077898] IRQ6 -> 0:6
[    5.078220] IRQ7 -> 0:7
[    5.078553] IRQ8 -> 0:8
[    5.078875] IRQ9 -> 0:9
[    5.079244] IRQ10 -> 0:10
[    5.079588] IRQ11 -> 0:11
[    5.079925] IRQ12 -> 0:12
[    5.080284] IRQ13 -> 0:13
[    5.080621] IRQ14 -> 0:14
[    5.080981] IRQ15 -> 0:15
[    5.081315] .................................... done.
[    5.082050] sched_clock: Marking stable (5080272128, 0)->(5391067221, -310795093)
[    5.083455] registered taskstats version 1
[    5.085064] Btrfs loaded, crc32c=crc32c-generic
[    5.085976] Key type trusted registered
[    5.086568] cryptomgr_probe (119) used greatest stack depth: 14552 bytes left
[    5.087662] Key type encrypted registered
[    5.390373] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    7.104692] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[    7.128103] Sending DHCP requests ., OK
[    7.129627] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[    7.131055] IP-Config: Complete:
[    7.131709]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[    7.133618]      host=vm-lkp-nex04-yocto-x86_64-13, domain=, nis-domain=(none)
[    7.135025]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[    7.137556] ALSA device list:
[    7.138170]   No soundcards found.
[    7.143986] Freeing unused kernel memory: 2976K
[    7.144973] Write protecting the kernel read-only data: 20480k
[    7.147944] Freeing unused kernel memory: 1036K
[    7.150966] Freeing unused kernel memory: 324K
[    7.152342] mmap: free gap 7fffdd005000, correct 7fffdc806000
[    7.153547] mm ffff8ab89e560b00 mmap ffff8ab897e26000 seqnum 0 task_size 140737488351232
[    7.153547] get_unmapped_area ffffffffaf02270e
[    7.153547] mmap_base 140204943560704 mmap_legacy_base 47427726827520 highest_vm_end 140736902225920
[    7.153547] pgd ffff8ab897e25000 mm_users 1 mm_count 1 nr_ptes 1 nr_pmds 1 map_count 1
[    7.153547] hiwater_rss 0 hiwater_vm 0 total_vm 1 locked_vm 0
[    7.153547] pinned_vm 0 data_vm 0 exec_vm 0 stack_vm 1
[    7.153547] start_code 0 end_code 0 start_data 0 end_data 0
[    7.153547] start_brk 0 brk 0 start_stack 0
[    7.153547] arg_start 7fffdd105d4e arg_end 0 env_start 0 env_end 0
[    7.153547] binfmt           (null) flags 8d core_state           (null)
[    7.153547] ioctx_table           (null)
[    7.153547] exe_file ffff8ab897fada00
[    7.153547] tlb_flush_pending 0
[    7.153547] def_flags: 0x0()
[    7.168652] ------------[ cut here ]------------
[    7.169579] kernel BUG at mm/mmap.c:388!
[    7.170690] invalid opcode: 0000 [#1] PREEMPT SMP
[    7.171625] CPU: 0 PID: 1 Comm: init Not tainted 4.12.0-06091-ga99d848 #3
[    7.172985] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    7.174982] task: ffff8ab880048000 task.stack: ffffacde40008000
[    7.176176] RIP: 0010:validate_mm+0x213/0x224
[    7.177045] RSP: 0000:ffffacde4000bb90 EFLAGS: 00010282
[    7.178094] RAX: 0000000000000290 RBX: 00000000ffffffff RCX: b0e7f7ea00000000
[    7.179508] RDX: 00000001b0449a78 RSI: 0000000000000001 RDI: 0000000000000246
[    7.180915] RBP: ffffacde4000bbd0 R08: ffff8ab880048770 R09: 0000000051472920
[    7.182313] R10: ffff8ab898919020 R11: ffffffffb12d8eaa R12: ffff8ab89e560b00
[    7.183758] R13: 0000000000000001 R14: 0000000000000000 R15: 00007fffdd106000
[    7.185175] FS:  0000000000000000(0000) GS:ffff8ab89f800000(0000) knlGS:0000000000000000
[    7.186776] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.187916] CR2: 0000000000000000 CR3: 0000000017e25000 CR4: 00000000000006f0
[    7.189313] Call Trace:
[    7.189828]  __vma_adjust+0x657/0x6ca
[    7.190583]  ? tlb_flush_mmu+0x15/0x18
[    7.191331]  shift_arg_pages+0x152/0x167
[    7.192162]  setup_arg_pages+0x1c1/0x1f4
[    7.192970]  load_elf_binary+0x344/0xe48
[    7.193782]  ? kvm_clock_read+0x25/0x35
[    7.194553]  ? kvm_sched_clock_read+0x9/0x12
[    7.195412]  ? search_binary_handler+0x52/0xce
[    7.196281]  search_binary_handler+0x5f/0xce
[    7.197150]  do_execveat_common+0x4dc/0x64c
[    7.198121]  ? rest_init+0x143/0x143
[    7.198851]  do_execve+0x1e/0x20
[    7.199519]  run_init_process+0x26/0x28
[    7.200288]  kernel_init+0x4f/0xe6
[    7.200977]  ret_from_fork+0x25/0x30
[    7.201679] Code: 41 8b 74 24 70 39 de 74 15 83 fb ff 74 15 89 da 48 c7 c7 d6 c8 23 b0 e8 ba f6 fc ff eb 05 45 85 f6 74 0a 4c 89 e7 e8 67 42 ff ff <0f> 0b 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f 5d c3 55 48 89 e5 
[    7.205614] RIP: validate_mm+0x213/0x224 RSP: ffffacde4000bb90
[    7.206830] ---[ end trace 95e0c74c93056b9b ]---
[    7.207777] Kernel panic - not syncing: Fatal exception
[    7.208869] Kernel Offset: 0x2e000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Elapsed time: 10

initrds=(
	/osimage/yocto/yocto-minimal-x86_64-2016-04-22.cgz
	/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-13/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-a99d848d3bc6586e922584ce8ec673a451a09cf1-20170709-60775-1hfnzzt-0.cgz
	/lkp/lkp/lkp-x86_64.cgz
	/osimage/pkg/static/trinity-x86_64.cgz
)

cat "${initrds[@]}" > /fs/sdb1/initrd-vm-lkp-nex04-yocto-x86_64-13

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/x86_64-acpi-redef/gcc-6/a99d848d3bc6586e922584ce8ec673a451a09cf1/vmlinuz-4.12.0-06091-ga99d848
	-initrd /fs/sdb1/initrd-vm-lkp-nex04-yocto-x86_64-13
	-m 512
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sdb1/disk0-vm-lkp-nex04-yocto-x86_64-13,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-lkp-nex04-yocto-x86_64-13
	-serial file:/dev/shm/kboot/vm-lkp-nex04-yocto-x86_64-13/serial
	-serial file:/dev/shm/kboot/vm-lkp-nex04-yocto-x86_64-13/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-nex04-yocto-x86_64-13::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-13/trinity-300s-yocto-minimal-x86_64-2016-04-22.cgz-a99d848d3bc6586e922584ce8ec673a451a09cf1-20170709-60775-1hfnzzt-0.yaml
	ARCH=x86_64
	kconfig=x86_64-acpi-redef
	branch=linux-devel/devel-spot-201707090554
	commit=a99d848d3bc6586e922584ce8ec673a451a09cf1
	BOOT_IMAGE=/pkg/linux/x86_64-acpi-redef/gcc-6/a99d848d3bc6586e922584ce8ec673a451a09cf1/vmlinuz-4.12.0-06091-ga99d848
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-lkp-nex04-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-acpi-redef/gcc-6/a99d848d3bc6586e922584ce8ec673a451a09cf1/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
