Hi,

On 15-06-17 10:09, Lee Jones wrote:
On Fri, 09 Jun 2017, Arnd Bergmann wrote:

I ran into a build error on ARM with a platform that has a non-standard
clk implementation:

drivers/clk/clk.o: In function `clk_disable':
clk.c:(.text.clk_disable+0x0): multiple definition of `clk_disable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_disable+0x0): first defined here
drivers/clk/clk.o: In function `clk_enable':
clk.c:(.text.clk_enable+0x0): multiple definition of `clk_enable'
arch/arm/mach-omap1/clock.o:clock.c:(.text.clk_enable+0x0): first defined here

The problem is a device driver that uses 'select COMMON_CLK', which is
generally a bad idea: selecting a subsystem should only be done from
a platform, otherwise we run into circular dependencies. The same driver
also selects 'GPIOLIB' and 'I2C', which has a similar effect.

This turns all three into 'depends on', as it should be. The same pattern
exists for INTEL_SOC_PMIC and INTEL_SOC_PMIC_CHTWC, so we fix both the
same way to keep them in sync. INTEL_SOC_PMIC does not depend on ACPI,
so we don't need to 'select' the I2C master driver when ACPI is disabled.

Finally, we can limit the build to x86, unless we are compile testing.

Fixes: 2f91ded5f8f4 ("mfd: Add Cherry Trail Whiskey Cove PMIC driver")
Fixes: 5f125f1f5705 ("mfd: intel_soc_pmic: Select designware i2c-bus driver")
Signed-off-by: Arnd Bergmann <a...@arndb.de>
---
  drivers/mfd/Kconfig | 15 ++++++---------
  1 file changed, 6 insertions(+), 9 deletions(-)

I need 2 patches, one for each of the Fixes above.  The plan being to
squash them into the original commits (keeping sign-off credits of
course) to prevent bisectability breakage.

If that does not happen, I will have to remove both offending patches
until they are fixed.

Ok, I've just send out a split version if this patch.

Regards,

Hans



diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ea5daa935518..74fa52582f06 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -454,14 +454,12 @@ config LPC_SCH
config INTEL_SOC_PMIC
        bool "Support for Crystal Cove PMIC"
-       depends on HAS_IOMEM
-       select GPIOLIB
-       select I2C
+       depends on HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
+       depends on X86 || COMPILE_TEST
        select MFD_CORE
        select REGMAP_I2C
        select REGMAP_IRQ
-       select COMMON_CLK
-       select I2C_DESIGNWARE_PLATFORM
+       select I2C_DESIGNWARE_PLATFORM if ACPI
        help
          Select this option to enable support for Crystal Cove PMIC
          on some Intel SoC systems. The PMIC provides ADC, GPIO,
@@ -484,13 +482,12 @@ config INTEL_SOC_PMIC_BXTWC
          on these systems.
config INTEL_SOC_PMIC_CHTWC
-       bool "Support for Intel Cherry Trail Whiskey Cove PMIC"
-       depends on ACPI && HAS_IOMEM
+       tristate "Support for Intel Cherry Trail Whiskey Cove PMIC"
+       depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK
+       depends on X86 || COMPILE_TEST
        select MFD_CORE
-       select I2C
        select REGMAP_I2C
        select REGMAP_IRQ
-       select COMMON_CLK
        select I2C_DESIGNWARE_PLATFORM
        help
          Select this option to enable support for the Intel Cherry Trail

Reply via email to