early console in setup code
Probing EDD (edd=off to disable)... ok
early console in extract_kernel
input_data: 0x0000000003107276
input_len: 0x000000000104274c
output: 0x0000000001000000
output_len: 0x0000000002513ce8
kernel_total_size: 0x0000000003175000
booted via startup_32()
Physical KASLR using RDTSC...
Virtual KASLR using RDTSC...

Decompressing Linux... Parsing ELF... Performing relocations... done.
Booting the kernel.
[    0.000000] Linux version 4.10.0-rc3-00070-gb4536f0c8 (kbuild@cairo) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Sat Jun 10 18:53:32 CST 2017
[    0.000000] Command line: ip=::::vm-lkp-nex04-yocto-x86_64-20::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-20/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-b4536f0c829c8586544c94735c343f9b5070bd01-20170610-130759-nyb7hu-9.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-05071834 branch=linus/master commit=b4536f0c829c8586544c94735c343f9b5070bd01 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-05071834/gcc-4.8/b4536f0c829c8586544c94735c343f9b5070bd01/vmlinuz-4.10.0-rc3-00070-gb4536f0c8 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-nex04-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-05071834/gcc-4.8/b4536f0c829c8586544c94735c343f9b5070bd01/9 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,1
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffde max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
Memory KASLR using RDTSC...
[    0.000000] Base memory trampoline at [ffff902ec0099000] 99000 size 24576
[    0.000000] BRK [0x1874a000, 0x1874afff] PGTABLE
[    0.000000] BRK [0x1874b000, 0x1874bfff] PGTABLE
[    0.000000] BRK [0x1874c000, 0x1874cfff] PGTABLE
[    0.000000] BRK [0x1874d000, 0x1874dfff] PGTABLE
[    0.000000] BRK [0x1874e000, 0x1874efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1fb1b000-0x1ffcffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F69B0 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE18DC 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE17B8 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 001778 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: APIC 0x000000001FFE182C 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE18A4 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] cma: Reserved 200 MiB at 0x0000000008c00000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1ffdd001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 879594880 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000001ffddfff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffddfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[    0.000000] On node 0 totalpages: 130940
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1984 pages used for memmap
[    0.000000]   DMA32 zone: 126942 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 17237ec0
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 128871
[    0.000000] Kernel command line: ip=::::vm-lkp-nex04-yocto-x86_64-20::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-20/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-b4536f0c829c8586544c94735c343f9b5070bd01-20170610-130759-nyb7hu-9.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-05071834 branch=linus/master commit=b4536f0c829c8586544c94735c343f9b5070bd01 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-05071834/gcc-4.8/b4536f0c829c8586544c94735c343f9b5070bd01/vmlinuz-4.10.0-rc3-00070-gb4536f0c8 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-nex04-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-05071834/gcc-4.8/b4536f0c829c8586544c94735c343f9b5070bd01/9 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Memory: 254492K/523760K available (18838K kernel code, 3856K rwdata, 7244K rodata, 1500K init, 16432K bss, 64468K reserved, 204800K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2260.998 MHz processor
[    0.168375] Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=22609980)
[    0.170070] pid_max: default: 32768 minimum: 301
[    0.171064] ACPI: Core revision 20160930
[    0.174525] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.175882] Security Framework initialized
[    0.176793] LoadPin: ready to pin (currently disabled)
[    0.176802] AppArmor: AppArmor initialized
[    0.178739] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180068] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.181925] mce: CPU supports 10 MCE banks
[    0.182850] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.183951] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.185139] CPU: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.191845] Performance Events: PMU not available due to virtualization, using software events only.
[    0.210042] enabled ExtINT on CPU#0
[    0.212048] ENABLING IO-APIC IRQs
[    0.212753] init IO_APIC IRQs
[    0.213364]  apic 0 pin 0 not connected
[    0.214249] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.215875] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.217650] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.219248] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.220889] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.222474] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.224128] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.225762] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.227428] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.229101] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.230768] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.232397] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.234077] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.235714] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.237456] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.239111]  apic 0 pin 16 not connected
[    0.239914]  apic 0 pin 17 not connected
[    0.240762]  apic 0 pin 18 not connected
[    0.241564]  apic 0 pin 19 not connected
[    0.242356]  apic 0 pin 20 not connected
[    0.243264]  apic 0 pin 21 not connected
[    0.244104]  apic 0 pin 22 not connected
[    0.244904]  apic 0 pin 23 not connected
[    0.245863] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.247144] Using local APIC timer interrupts.
[    0.247144] calibrating APIC timer ...
[    0.366611] ... lapic delta = 6249309
[    0.367411] ... PM-Timer delta = 357916
[    0.368182] ... PM-Timer result ok
[    0.368864] ..... delta 6249309
[    0.369475] ..... mult: 268405777
[    0.370237] ..... calibration result: 9998894
[    0.371117] ..... CPU clock speed is 2260.7632 MHz.
[    0.372083] ..... host bus clock speed is 999.8894 MHz.
[    0.373427] devtmpfs: initialized
[    0.374277] x86/mm: Memory block size: 128MB
[    0.382430] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.387377] xor: measuring software checksum speed
[    0.483172]    prefetch64-sse:  7746.800 MB/sec
[    0.583159]    generic_sse:  6457.200 MB/sec
[    0.584081] xor: using function: prefetch64-sse (7746.800 MB/sec)
[    0.585282] prandom: seed boundary self test passed
[    0.587413] prandom: 100 self tests passed
[    0.588254] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.589810] regulator-dummy: no parameters
[    0.590930] NET: Registered protocol family 16
[    0.593419] cpuidle: using governor menu
[    0.595409] ACPI: bus type PCI registered
[    0.596343] PCI: Using configuration type 1 for base access
[    0.773162] raid6: sse2x1   gen()  3486 MB/s
[    0.943126] raid6: sse2x1   xor()  2470 MB/s
[    1.113102] raid6: sse2x2   gen()  4492 MB/s
[    1.283099] raid6: sse2x2   xor()  3295 MB/s
[    1.453085] raid6: sse2x4   gen()  4907 MB/s
[    1.623062] raid6: sse2x4   xor()  3425 MB/s
[    1.623834] raid6: using algorithm sse2x4 gen() 4907 MB/s
[    1.624759] raid6: .... xor() 3425 MB/s, rmw enabled
[    1.625630] raid6: using intx1 recovery algorithm
[    1.626675] ACPI: Added _OSI(Module Device)
[    1.627427] ACPI: Added _OSI(Processor Device)
[    1.628193] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.629016] ACPI: Added _OSI(Processor Aggregator Device)
[    1.633301] ACPI: Interpreter enabled
[    1.633995] ACPI: (supports S0 S3 S5)
[    1.634638] ACPI: Using IOAPIC for interrupt routing
[    1.635559] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.643099] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.644188] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    1.645133] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.646375] PCI host bridge to bus 0000:00
[    1.647109] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.648271] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.649446] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.650773] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    1.652055] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.653080] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.654778] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.656675] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.665775] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    1.670576] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.671809] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.672939] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.674169] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.675649] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.677232] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.678483] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.680278] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.684713] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.692334] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.705739] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.707309] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.711011] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    1.715071] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    1.731343] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.733013] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    1.738501] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    1.743157] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    1.755908] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    1.762195] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    1.764509] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    1.774293] pci_bus 0000:00: on NUMA node 0
[    1.775762] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.776952] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.778091] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.779229] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.780281] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.781846] ACPI: Enabled 3 GPEs in block 00 to 0F
[    1.783164] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    1.784194] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.785647] pci 0000:00:02.0: vgaarb: bridge control possible
[    1.786627] vgaarb: loaded
[    1.787451] SCSI subsystem initialized
[    1.788217] libata version 3.00 loaded.
[    1.788900] ACPI: bus type USB registered
[    1.789627] usbcore: registered new interface driver usbfs
[    1.790583] usbcore: registered new interface driver hub
[    1.791499] usbcore: registered new device driver usb
[    1.792445] media: Linux media interface: v0.10
[    1.793268] Linux video capture interface: v2.00
[    1.794088] pps_core: LinuxPPS API ver. 1 registered
[    1.794940] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.796484] PTP clock support registered
[    1.797259] Unable to find dmi tokens
[    1.798025] FPGA manager framework
[    1.798666] Advanced Linux Sound Architecture Driver Initialized.
[    1.799721] PCI: Using ACPI for IRQ routing
[    1.800436] PCI: pci_cache_line_size set to 64 bytes
[    1.801478] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.802502] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[    1.803750] Bluetooth: Core ver 2.22
[    1.804389] NET: Registered protocol family 31
[    1.805160] Bluetooth: HCI device and connection manager initialized
[    1.806244] Bluetooth: HCI socket layer initialized
[    1.807088] Bluetooth: L2CAP socket layer initialized
[    1.807979] Bluetooth: SCO socket layer initialized
[    1.808836] NET: Registered protocol family 8
[    1.809598] NET: Registered protocol family 20
[    1.811656] clocksource: Switched to clocksource kvm-clock
[    1.821029] Warning: could not register annotated branches stats
[    1.850010] VFS: Disk quotas dquot_6.6.0
[    1.850758] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.852028] FS-Cache: Loaded
[    1.852635] CacheFiles: Loaded
[    1.853233] AppArmor: AppArmor Filesystem Enabled
[    1.854115] pnp: PnP ACPI init
[    1.854788] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.855997] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.857185] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.858322] pnp 00:03: [dma 2]
[    1.858901] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.860133] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.861359] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.862612] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.864123] pnp: PnP ACPI: found 7 devices
[    1.869897] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.871446] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.872531] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.873591] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.874749] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    1.875982] NET: Registered protocol family 1
[    1.876762] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.877784] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.878789] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.879897] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.881353] PCI: CLS 0 bytes, default 64
[    1.882895] Trying to unpack rootfs image as initramfs...
[    2.201655] Freeing initrd memory: 4820K
[    2.203624] Machine check injector initialized
[    2.205624] AVX or AES-NI instructions are not detected.
[    2.206548] CPU feature 'AVX registers' is not supported.
[    2.207455] CPU feature 'AVX registers' is not supported.
[    2.208381] CPU feature 'AVX registers' is not supported.
[    2.209298] AVX2 or AES-NI instructions are not detected.
[    2.210216] AVX2 instructions are not detected.
[    2.211066] spin_lock-torture:--- Start of test: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    2.213982] spin_lock-torture: Creating torture_shuffle task
[    2.214967] spin_lock-torture: Creating torture_stutter task
[    2.215948] spin_lock-torture: torture_shuffle task started
[    2.216907] spin_lock-torture: Creating lock_torture_writer task
[    2.217950] spin_lock-torture: torture_stutter task started
[    2.218913] spin_lock-torture: Creating lock_torture_writer task
[    2.219955] spin_lock-torture: lock_torture_writer task started
[    2.220979] spin_lock-torture: Creating lock_torture_stats task
[    2.222027] spin_lock-torture: lock_torture_writer task started
[    2.223080] torture_init_begin: Refusing rcu init: spin_lock running.
[    2.224200] torture_init_begin: One torture test at a time!
[    2.225373] futex hash table entries: 256 (order: 0, 6144 bytes)
[    2.226419] audit: initializing netlink subsys (disabled)
[    2.227406] spin_lock-torture: lock_torture_stats task started
[    2.228692] audit: type=2000 audit(1497092654.260:1): initialized
[    2.229886] Initialise system trusted keyrings
[    2.231712] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    2.235959] zbud: loaded
[    2.237279] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.240493] QNX4 filesystem 0.2.3 registered.
[    2.241307] qnx6: QNX6 filesystem 1.0.0 registered.
[    2.242271] fuse init (API version 7.26)
[    2.243197] orangefs_debugfs_init: called with debug mask: :none: :0:
[    2.244399] orangefs_init: module version upstream loaded
[    2.245500] JFS: nTxBlock = 3625, nTxLock = 29007
[    2.247509] SGI XFS with security attributes, realtime, debug enabled
[    2.249586] NILFS version 2 loaded
[    2.250179] befs: version: 0.9.3
[    2.250930] ocfs2: Registered cluster interface o2cb
[    2.251895] OCFS2 User DLM kernel interface loaded
[    2.253516] gfs2: GFS2 installed
[    2.268419] NET: Registered protocol family 38
[    2.269223] async_tx: api initialized (async)
[    2.269984] Key type asymmetric registered
[    2.270774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    2.272087] io scheduler noop registered (default)
[    2.275019] test_hexdump: all 1184 tests passed
[    2.275886] test_firmware: interface ready
[    2.287696] test_hash: __hash_32() has no arch implementation to test.
[    2.288839] test_hash: hash_32() has no arch implementation to test.
[    2.289931] test_hash: hash_64() has no arch implementation to test.
[    2.291010] test_hash: 33152 tests passed.
[    2.291803] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    2.292887] Test 00:
[    2.297734]   Adding 50000 keys
[    2.319596]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.334009]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.335435]   Deleting 50000 keys
[    2.347025]   Duration of test: 48717667 ns
[    2.347844] Test 01:
[    2.352715]   Adding 50000 keys
[    2.374637]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.390330]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.392208]   Deleting 50000 keys
[    2.403581]   Duration of test: 50287474 ns
[    2.404350] Test 02:
[    2.408887]   Adding 50000 keys
[    2.429189]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.443334]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.444925]   Deleting 50000 keys
[    2.455875]   Duration of test: 46397644 ns
[    2.456467] Test 03:
[    2.461216]   Adding 50000 keys
[    2.482178]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.496416]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.497890]   Deleting 50000 keys
[    2.508894]   Duration of test: 46911639 ns
[    2.509919] Average test time: 48078606
[    2.510720] Testing concurrent rhashtable access from 10 threads
[    2.724205]   thread[8]: rhashtable_insert_fast failed
[    2.725388]   thread[0]: rhashtable_insert_fast failed
[    2.726509] Test failed: thread 0 returned: -12
[    3.433124] tsc: Refined TSC clocksource calibration: 2260.999 MHz
[    3.434330] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x20974a4d8bb, max_idle_ns: 440795246623 ns
[    3.852639] Test failed: thread 8 returned: -12
[    3.853670] Started 10 threads, 2 failed
[    3.855937] test_printf: all 260 tests passed
[    3.927413] test_bitmap: all 460506 tests passed
[    3.933763] test_uuid: all 18 tests passed
[    3.935298] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[    3.936402] crc32: self tests passed, processed 225944 bytes in 301381 nsec
[    3.938180] crc32c: CRC_LE_BITS = 32
[    3.938975] crc32c: self tests passed, processed 225944 bytes in 154125 nsec
[    3.964898] crc32_combine: 8373 self tests passed
[    3.990238] crc32c_combine: 8373 self tests passed
[    3.991465] xz_dec_test: module loaded
[    3.992298] xz_dec_test: Create a device node with 'mknod xz_dec_test c 242 0' and write .xz files to it.
[    3.994438] glob: 64 self-tests passed, 0 failed
[    3.995665] gpio_it87: no device
[    3.996492] gpio-mockup: probe of gpio-mockup failed with error -22
[    3.998152] no IO addresses supplied
[    3.999083] hgafb: HGA card not detected.
[    3.999952] hgafb: probe of hgafb.0 failed with error -22
[    4.001180] usbcore: registered new interface driver udlfb
[    4.002439] usbcore: registered new interface driver smscufx
[    4.003691] ipmi message handler version 39.2
[    4.004658] ipmi device interface
[    4.005414] IPMI System Interface driver.
[    4.006298] ipmi_si: Unable to find any System Interface(s)
[    4.007231] IPMI SSIF Interface driver
[    4.007880] IPMI Watchdog: driver initialized
[    4.008631] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    4.010033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    4.011264] ACPI: Power Button [PWRF]
[    4.033868] r3964: Philips r3964 Driver $Revision: 1.10 $
[    4.035071] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    4.064560] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.091754] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    4.093624] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    4.094432] smapi::smapi_init, ERROR invalid usSmapiID
[    4.095339] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    4.096705] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    4.097879] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    4.107686] brd: module loaded
[    4.110344] loop: module loaded
[    4.111725] null: module loaded
[    4.112321] dummy-irq: no IRQ given.  Use irq=N
[    4.113284] lkdtm: No crash points registered, enable through debugfs
[    4.114660] usbcore: registered new interface driver dln2
[    4.115672] Uniform Multi-Platform E-IDE driver
[    4.117181] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    4.119006] ide-gd driver 1.18
[    4.119407] ide-cd driver 5.00
[    4.120114] Loading iSCSI transport class v2.0-870.
[    4.121058] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[    4.122444] osst :I: Tape driver with OnStream support version 0.99.4
[    4.122444] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[    4.124522] SCSI Media Changer driver v0.25 
[    4.129366] scsi host0: scsi_debug: version 1.86 [20160430]
[    4.129366]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[    4.131521] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0186 PQ: 0 ANSI: 7
[    4.133700] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.134949] SSFDC read-only Flash Translation layer
[    4.136024] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[    4.137531] slram: not enough parameters.
[    4.139110] ftl_cs: FTL header not found.
[    4.173459] No valid DiskOnChip devices found
[    4.174279] vcan: Virtual CAN interface driver
[    4.175168] slcan: serial line CAN interface driver
[    4.175935] slcan: 10 dynamic interface channels.
[    4.176930] CAN device driver interface
[    4.177500] usbcore: registered new interface driver ems_usb
[    4.178730] usbcore: registered new interface driver gs_usb
[    4.179502] usbcore: registered new interface driver kvaser_usb
[    4.180599] usbcore: registered new interface driver peak_usb
[    4.181496] cc770: CAN netdevice driver
[    4.182384] cc770_isa: insufficient parameters supplied
[    4.183376] sja1000 CAN netdevice driver
[    4.183978] sja1000_isa: insufficient parameters supplied
[    4.184863] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[    4.185983] YAM driver version 0.8 by F1OAT/F6FBB
[    4.187383] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[    4.187383] baycom_ser_fdx: version 0.10
[    4.189626] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[    4.190647] hdlcdrv: version 0.8
[    4.191144] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[    4.191144] baycom_ser_hdx: version 0.10
[    4.193438] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB)
[    4.205576] aoe: AoE v85 initialised.
[    4.206484] usbcore: registered new interface driver hwa-rc
[    4.207466] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.208918] ehci-pci: EHCI PCI platform driver
[    4.209888] ehci-platform: EHCI generic platform driver
[    4.210870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.212232] sd 0:0:0:0: [sda] Write Protect is off
[    4.212236] sd 0:0:0:0: [sda] Mode Sense: 73 00 10 08
[    4.215577] ohci-pci: OHCI PCI platform driver
[    4.216476] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[    4.217478] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    4.219122] usbcore: registered new interface driver wusb-cbaf
[    4.220190] usbcore: registered new interface driver usblp
[    4.221135] usbcore: registered new interface driver cdc_wdm
[    4.222337] usbcore: registered new interface driver mdc800
[    4.223360] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[    4.224717] usbcore: registered new interface driver microtekX6
[    4.225921] usbcore: registered new interface driver usbserial
[    4.227032] usbcore: registered new interface driver usbserial_generic
[    4.228085] usbserial: USB Serial support registered for generic
[    4.229166] usbcore: registered new interface driver aircable
[    4.230168] usbserial: USB Serial support registered for aircable
[    4.231465] usbcore: registered new interface driver cyberjack
[    4.232675] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    4.234273] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[    4.235749] usbcore: registered new interface driver usb_debug
[    4.236864] usbserial: USB Serial support registered for debug
[    4.238039] usbcore: registered new interface driver digi_acceleport
[    4.239039] usbserial: USB Serial support registered for Digi 2 port USB adapter
[    4.240294] usbserial: USB Serial support registered for Digi 4 port USB adapter
[    4.241795] usbcore: registered new interface driver io_edgeport
[    4.242934] usbserial: USB Serial support registered for Edgeport 2 port adapter
[    4.244076] usbserial: USB Serial support registered for Edgeport 4 port adapter
[    4.245449] usbserial: USB Serial support registered for Edgeport 8 port adapter
[    4.246935] usbserial: USB Serial support registered for EPiC device
[    4.248132] usbcore: registered new interface driver io_ti
[    4.249017] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[    4.250323] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[    4.251988] usbcore: registered new interface driver f81232
[    4.253234] usbserial: USB Serial support registered for f81232
[    4.254444] usbcore: registered new interface driver ipaq
[    4.255353] usbserial: USB Serial support registered for PocketPC PDA
[    4.256629] usbcore: registered new interface driver iuu_phoenix
[    4.257849] usbserial: USB Serial support registered for iuu_phoenix
[    4.258961] usbcore: registered new interface driver keyspan
[    4.259757] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    4.261142] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    4.262707] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    4.263758] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    4.265086] usbcore: registered new interface driver keyspan_pda
[    4.266255] usbserial: USB Serial support registered for Keyspan PDA
[    4.267181] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[    4.268574] usbserial: USB Serial support registered for Xircom / Entrega PGS - (prerenumeration)
[    4.270063] usbcore: registered new interface driver kl5kusb105
[    4.270971] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
[    4.272217] usbcore: registered new interface driver mos7840
[    4.273179] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[    4.274472] usbcore: registered new interface driver mxuport
[    4.275511] usbserial: USB Serial support registered for MOXA UPort
[    4.276687] usbcore: registered new interface driver option
[    4.277704] usbserial: USB Serial support registered for GSM modem (1-port)
[    4.279001] usbcore: registered new interface driver oti6858
[    4.279929] usbserial: USB Serial support registered for oti6858
[    4.281071] usbcore: registered new interface driver pl2303
[    4.282349] usbserial: USB Serial support registered for pl2303
[    4.283266] usbcore: registered new interface driver qcaux
[    4.284327] usbserial: USB Serial support registered for qcaux
[    4.285228] usbcore: registered new interface driver qcserial
[    4.286491] usbserial: USB Serial support registered for Qualcomm USB modem
[    4.287805] usbcore: registered new interface driver quatech2
[    4.288519] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[    4.290104] usbcore: registered new interface driver safe_serial
[    4.291253] usbserial: USB Serial support registered for safe_serial
[    4.308195] usbcore: registered new interface driver usb_serial_simple
[    4.309391] usbserial: USB Serial support registered for carelink
[    4.310397] usbserial: USB Serial support registered for zio
[    4.311516] usbserial: USB Serial support registered for funsoft
[    4.312889] usbserial: USB Serial support registered for flashloader
[    4.314056] usbserial: USB Serial support registered for google
[    4.314916] usbserial: USB Serial support registered for vivopay
[    4.316083] usbserial: USB Serial support registered for moto_modem
[    4.317283] usbserial: USB Serial support registered for novatel_gps
[    4.318310] usbserial: USB Serial support registered for hp4x
[    4.319398] usbserial: USB Serial support registered for suunto
[    4.320360] usbserial: USB Serial support registered for siemens_mpi
[    4.321654] usbcore: registered new interface driver symbolserial
[    4.322792] usbserial: USB Serial support registered for symbol
[    4.323652] usbcore: registered new interface driver whiteheat
[    4.324910] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[    4.326677] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[    4.327980] usbcore: registered new interface driver xsens_mt
[    4.328837] usbserial: USB Serial support registered for xsens_mt
[    4.329976] usbcore: registered new interface driver appledisplay
[    4.331095] usbcore: registered new interface driver cypress_cy7c63
[    4.332354] usbcore: registered new interface driver cytherm
[    4.333361] usbcore: registered new interface driver emi26 - firmware loader
[    4.334688] usbcore: registered new interface driver idmouse
[    4.335671] usbcore: registered new interface driver ldusb
[    4.336717] usbcore: registered new interface driver legousbtower
[    4.337857] usbcore: registered new interface driver usb_ehset_test
[    4.339060] usbcore: registered new interface driver trancevibrator
[    4.340105] usbcore: registered new interface driver usbsevseg
[    4.341206] usbcore: registered new interface driver sisusb
[    4.342470] usbcore: registered new interface driver lvs
[    4.343554] CHRDEV "ttyGS" major number 233 goes below the dynamic allocation range
[    4.344927] udc-core: couldn't find an available UDC - added [g_mass_storage] to list of pending drivers
[    4.346879] usbip_core: usbip_core_init:776: USB/IP Core v1.0.0
[    4.348296] vhci_hcd: vhci_hcd_probe:1087: name vhci_hcd id -1
[    4.349481] vhci_hcd vhci_hcd: USB/IP Virtual Host Controller
[    4.350436] vhci_hcd vhci_hcd: new USB bus registered, assigned bus number 1
[    4.351549] vhci_hcd: vhci_start:949: enter vhci_start
[    4.352561] vhci_hcd: vhci_start:985: created sysfs vhci_hcd
[    4.353493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    4.354688] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.356036] usb usb1: Product: USB/IP Virtual Host Controller
[    4.357045] usb usb1: Manufacturer: Linux 4.10.0-rc3-00070-gb4536f0c8 vhci_hcd
[    4.358369] usb usb1: SerialNumber: vhci_hcd
[    4.359388] hub 1-0:1.0: USB hub found
[    4.360187] vhci_hcd: vhci_hub_control:266: typeReq a006 wValue 2900 wIndex 0
[    4.361625] vhci_hcd: vhci_hub_control:324:  GetHubDescriptor
[    4.362831] vhci_hcd: vhci_hub_control:418: port -1
[    4.363826] vhci_hcd: vhci_hub_control:425:  bye
[    4.364638] hub 1-0:1.0: 8 ports detected
[    4.365450] vhci_hcd: vhci_hub_control:266: typeReq a000 wValue 0 wIndex 0
[    4.366763] vhci_hcd: vhci_hub_control:328:  GetHubStatus
[    4.367739] vhci_hcd: vhci_hub_control:418: port -1
[    4.368684] vhci_hcd: vhci_hub_control:425:  bye
[    4.369560] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 1
[    4.370810] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.371989] vhci_hcd: vhci_hub_control:418: port 0
[    4.372928] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.374427] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.375481] vhci_hcd: dump_port_status_diff:122: 
[    4.376425] vhci_hcd: vhci_hub_control:425:  bye
[    4.377400] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 2
[    4.378725] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.379978] vhci_hcd: vhci_hub_control:418: port 1
[    4.380930] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.382516] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.383497] vhci_hcd: dump_port_status_diff:122: 
[    4.384465] vhci_hcd: vhci_hub_control:425:  bye
[    4.385445] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 3
[    4.386841] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.388151] vhci_hcd: vhci_hub_control:418: port 2
[    4.389108] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.390620] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.391745] vhci_hcd: dump_port_status_diff:122: 
[    4.392687] vhci_hcd: vhci_hub_control:425:  bye
[    4.393735] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 4
[    4.395109] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.396419] vhci_hcd: vhci_hub_control:418: port 3
[    4.397401] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.398992] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.400035] vhci_hcd: dump_port_status_diff:122: 
[    4.400989] vhci_hcd: vhci_hub_control:425:  bye
[    4.401943] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 5
[    4.403316] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.404591] vhci_hcd: vhci_hub_control:418: port 4
[    4.405517] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.407155] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.408153] vhci_hcd: dump_port_status_diff:122: 
[    4.409080] vhci_hcd: vhci_hub_control:425:  bye
[    4.409953] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 6
[    4.411228] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.412568] vhci_hcd: vhci_hub_control:418: port 5
[    4.413466] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.415042] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.416148] vhci_hcd: dump_port_status_diff:122: 
[    4.417182] vhci_hcd: vhci_hub_control:425:  bye
[    4.418263] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 7
[    4.419807] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.421022] vhci_hcd: vhci_hub_control:418: port 6
[    4.422015] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.423506] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.424511] vhci_hcd: dump_port_status_diff:122: 
[    4.425499] vhci_hcd: vhci_hub_control:425:  bye
[    4.426440] vhci_hcd: vhci_hub_control:266: typeReq 2303 wValue 8 wIndex 8
[    4.427772] vhci_hcd: vhci_hub_control:404:  SetPortFeature: default 8
[    4.428978] vhci_hcd: vhci_hub_control:418: port 7
[    4.429873] vhci_hcd: dump_port_status_diff:104: status prev -> new: 00000000 -> 00000100
[    4.431437] vhci_hcd: dump_port_status_diff:118:  +POWER
[    4.432475] vhci_hcd: dump_port_status_diff:122: 
[    4.433372] vhci_hcd: vhci_hub_control:425:  bye
[    4.434631] vhci_hcd: vhci_hcd_probe:1111: bye
[    4.435479] vhci_hcd: vhci_hcd_init:1260: USB/IP 'Virtual' Host Controller (VHCI) Driver v1.0.0
[    4.437222] usbcore: registered new device driver usbip-host
[    4.438295] usbip_host: usbip_host_init:302: USB/IP Host Driver v1.0.0
[    4.439789] Mass Storage Function, version: 2009/09/11
[    4.440830] LUN: removable file: (no medium)
[    4.441735] no file given for LUN0
[    4.442394] g_mass_storage usbip-vudc.0: failed to start g_mass_storage: -22
[    4.443795] usbip-vudc: probe of usbip-vudc.0 failed with error -22
[    4.445075] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    4.447707] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.448652] serio: i8042 KBD port at 0x60,0x64 irq 12
[    4.449626] kobject (ffff902eda7d6d58): tried to init an initialized object, something is seriously wrong.
[    4.451431] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.0-rc3-00070-gb4536f0c8 #1
[    4.452774] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[    4.452784] IP: process_one_work+0x37/0x500
[    4.452786] PGD 0 
[    4.452787] 
[    4.452788] Oops: 0000 [#1]
[    4.452792] CPU: 0 PID: 21 Comm: kworker/0:1 Not tainted 4.10.0-rc3-00070-gb4536f0c8 #1
[    4.452793] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    4.452801] task: ffff902edf6f6e00 task.stack: ffff902edf7a0000
[    4.452804] RIP: 0010:process_one_work+0x37/0x500
[    4.452805] RSP: 0000:ffff902edf7a3e58 EFLAGS: 00010046
[    4.452807] RAX: ffff902edc3ae800 RBX: ffff902edf788930 RCX: ffff902edfb13960
[    4.452808] RDX: ffff902edc3ae800 RSI: ffff902edc3ad000 RDI: ffff902edf788900
[    4.452809] RBP: ffff902edf7a3e98 R08: ffff902edfb13040 R09: ffff902edf62c651
[    4.452811] R10: 0000000000000000 R11: 0000000000000800 R12: ffffffff9964bb80
[    4.452812] R13: ffff902edf788900 R14: 0000000000000000 R15: ffff902edc3ad000
[    4.452815] FS:  0000000000000000(0000) GS:ffffffff99631000(0000) knlGS:0000000000000000
[    4.452816] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.452817] CR2: 00000000000000a8 CR3: 000000001720e000 CR4: 00000000000006f0
[    4.452823] Call Trace:
[    4.452827]  worker_thread+0x2ae/0x680
[    4.452832]  kthread+0x10b/0x140
[    4.452834]  ? process_one_work+0x500/0x500
[    4.452836]  ? __kthread_create_on_node+0x190/0x190
[    4.452842]  ret_from_fork+0x2a/0x40
[    4.452842] Code: 89 f7 41 56 45 31 f6 41 55 49 89 fd 41 54 53 48 83 ec 18 48 8b 06 4c 8b 67 48 48 89 c2 30 d2 a8 04 4c 0f 45 f2 41 f6 44 24 0c 04 <49> 8b 46 08 8b 88 00 01 00 00 75 08 41 8b 04 24 85 c0 75 7b 31 
[    4.452877] RIP: process_one_work+0x37/0x500 RSP: ffff902edf7a3e58
[    4.452878] CR2: 0000000000000008
[    4.452884] ---[ end trace 7927a8ec55f232e3 ]---
[    4.452885] Kernel panic - not syncing: Fatal exception
[    4.452889] Kernel Offset: 0x16a00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Elapsed time: 10

initrds=(
	/osimage/yocto/yocto-minimal-x86_64-2016-04-22.cgz
	/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-20/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-b4536f0c829c8586544c94735c343f9b5070bd01-20170610-130759-nyb7hu-9.cgz
	/lkp/lkp/lkp-x86_64.cgz
)

cat "${initrds[@]}" > /fs/sdb1/initrd-vm-lkp-nex04-yocto-x86_64-20

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-kernel /pkg/linux/x86_64-randconfig-n0-05071834/gcc-4.8/b4536f0c829c8586544c94735c343f9b5070bd01/vmlinuz-4.10.0-rc3-00070-gb4536f0c8
	-initrd /fs/sdb1/initrd-vm-lkp-nex04-yocto-x86_64-20
	-m 512
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sdb1/disk0-vm-lkp-nex04-yocto-x86_64-20,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-lkp-nex04-yocto-x86_64-20
	-serial file:/dev/shm/kboot/vm-lkp-nex04-yocto-x86_64-20/serial
	-serial file:/dev/shm/kboot/vm-lkp-nex04-yocto-x86_64-20/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-nex04-yocto-x86_64-20::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-nex04-yocto-x86_64-20/boot-1-yocto-minimal-x86_64-2016-04-22.cgz-b4536f0c829c8586544c94735c343f9b5070bd01-20170610-130759-nyb7hu-9.yaml
	ARCH=x86_64
	kconfig=x86_64-randconfig-n0-05071834
	branch=linus/master
	commit=b4536f0c829c8586544c94735c343f9b5070bd01
	BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-05071834/gcc-4.8/b4536f0c829c8586544c94735c343f9b5070bd01/vmlinuz-4.10.0-rc3-00070-gb4536f0c8
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-nex04-yocto-x86_64/yocto-minimal-x86_64-2016-04-22.cgz/x86_64-randconfig-n0-05071834/gcc-4.8/b4536f0c829c8586544c94735c343f9b5070bd01/9
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
